From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?iso-8859-1?Q?St=E9phan?= Kochen Subject: Re: [PATCH 3/3] lm90: register with thermal zones Date: Sat, 23 Jan 2016 00:02:40 +0100 Message-ID: <20160122230239.GA22301@Stephans-iMac.lan> References: <1453404877-17897-1-git-send-email-stephan@kochen.nl> <1453404877-17897-4-git-send-email-stephan@kochen.nl> <20160122224542.GA26117@rob-hp-laptop> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Content-Disposition: inline In-Reply-To: <20160122224542.GA26117@rob-hp-laptop> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Rob Herring Cc: Jean Delvare , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Guenter Roeck , lm-sensors-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: devicetree@vger.kernel.org On Fri, Jan 22, 2016 at 04:45:42PM -0600, Rob Herring wrote: > On Thu, Jan 21, 2016 at 08:34:37PM +0100, St=E9phan Kochen wrote: > > +- #thermal-sensor-cells: Should be 1. See ../../thermal/thermal.tx= t for a > > + description of this property. Use the fol= lowing > > + values to refer to a specific sensor: > > + 0: chip internal sensor > > + 1: external sensor > > + 2: second external sensor, if present >=20 > From my read of an LM90 datasheet, there is only an onchip sensor and= a=20 > single external one. MAX6695 and MAX6696 have two external sensors, and also use the lm90 driver. (The LM90_HAVE_TEMP3 flag in the code.) --=20 St=E9phan Kochen -- To unsubscribe from this list: send the line "unsubscribe devicetree" i= n the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html