devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lee Jones <lee.jones@linaro.org>
To: "Andrew F. Davis" <afd@ti.com>
Cc: Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Kumar Gala <galak@codeaurora.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	Alexandre Courbot <gnurou@gmail.com>,
	Samuel Ortiz <sameo@linux.intel.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>,
	devicetree@vger.kernel.org, linux-gpio@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v6 3/3] gpio: tps65086: Add GPO driver for the TPS65086 PMIC
Date: Tue, 26 Jan 2016 14:03:12 +0000	[thread overview]
Message-ID: <20160126140312.GB3368@x1> (raw)
In-Reply-To: <1453737012-3130-4-git-send-email-afd@ti.com>

On Mon, 25 Jan 2016, Andrew F. Davis wrote:

> Add support for the TPS65086 PMIC GPOs.
> 
> TPS65086 has four configurable GPOs that can be used for several
> purposes. These are output only.
> 
> Signed-off-by: Andrew F. Davis <afd@ti.com>
> ---
>  drivers/gpio/Kconfig         |   6 ++
>  drivers/gpio/Makefile        |   1 +
>  drivers/gpio/gpio-tps65086.c | 144 +++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 151 insertions(+)
>  create mode 100644 drivers/gpio/gpio-tps65086.c

Is this patch orthogonal to the other two in the set, or do they all
need to go in together?

> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index c88dd24..e35e120 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -844,6 +844,12 @@ config GPIO_TIMBERDALE
>  	---help---
>  	Add support for the GPIO IP in the timberdale FPGA.
>  
> +config GPIO_TPS65086
> +	tristate "TI TPS65086 GPO"
> +	depends on MFD_TPS65086
> +	help
> +	  This driver supports the GPO on TI TPS65086x PMICs.
> +
>  config GPIO_TPS6586X
>  	bool "TPS6586X GPIO"
>  	depends on MFD_TPS6586X
> diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
> index ece7d7c..c759190 100644
> --- a/drivers/gpio/Makefile
> +++ b/drivers/gpio/Makefile
> @@ -95,6 +95,7 @@ obj-$(CONFIG_GPIO_TC3589X)	+= gpio-tc3589x.o
>  obj-$(CONFIG_ARCH_TEGRA)	+= gpio-tegra.o
>  obj-$(CONFIG_GPIO_TIMBERDALE)	+= gpio-timberdale.o
>  obj-$(CONFIG_GPIO_PALMAS)	+= gpio-palmas.o
> +obj-$(CONFIG_GPIO_TPS65086)	+= gpio-tps65086.o
>  obj-$(CONFIG_GPIO_TPS6586X)	+= gpio-tps6586x.o
>  obj-$(CONFIG_GPIO_TPS65910)	+= gpio-tps65910.o
>  obj-$(CONFIG_GPIO_TPS65912)	+= gpio-tps65912.o
> diff --git a/drivers/gpio/gpio-tps65086.c b/drivers/gpio/gpio-tps65086.c
> new file mode 100644
> index 0000000..d5d9e47
> --- /dev/null
> +++ b/drivers/gpio/gpio-tps65086.c
> @@ -0,0 +1,144 @@
> +/*
> + * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
> + *	Andrew F. Davis <afd@ti.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> + * kind, whether expressed or implied; without even the implied warranty
> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License version 2 for more details.
> + *
> + * Based on the TPS65912 driver
> + */
> +
> +#include <linux/gpio.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +
> +#include <linux/mfd/tps65086.h>
> +
> +struct tps65086_gpio {
> +	struct gpio_chip chip;
> +	struct tps65086 *tps;
> +};
> +
> +static inline struct tps65086_gpio *to_tps65086_gpio(struct gpio_chip *chip)
> +{
> +	return container_of(chip, struct tps65086_gpio, chip);
> +}
> +
> +static int tps65086_gpio_get_direction(struct gpio_chip *chip,
> +				       unsigned offset)
> +{
> +	/* This device is output only */
> +	return 0;
> +}
> +
> +static int tps65086_gpio_direction_input(struct gpio_chip *chip,
> +					 unsigned offset)
> +{
> +	/* This device is output only */
> +	return -EINVAL;
> +}
> +
> +static int tps65086_gpio_direction_output(struct gpio_chip *chip,
> +					  unsigned offset, int value)
> +{
> +	struct tps65086_gpio *gpio = to_tps65086_gpio(chip);
> +
> +	/* Set the initial value */
> +	regmap_update_bits(gpio->tps->regmap, TPS65086_GPOCTRL,
> +			   BIT(4 + offset), value ? BIT(4 + offset) : 0);
> +
> +	return 0;
> +}
> +
> +static int tps65086_gpio_get(struct gpio_chip *chip, unsigned offset)
> +{
> +	struct tps65086_gpio *gpio = to_tps65086_gpio(chip);
> +	int ret, val;
> +
> +	ret = regmap_read(gpio->tps->regmap, TPS65086_GPOCTRL, &val);
> +	if (ret < 0)
> +		return ret;
> +
> +	return val & BIT(4 + offset);
> +}
> +
> +static void tps65086_gpio_set(struct gpio_chip *chip, unsigned offset,
> +			      int value)
> +{
> +	struct tps65086_gpio *gpio = to_tps65086_gpio(chip);
> +
> +	regmap_update_bits(gpio->tps->regmap, TPS65086_GPOCTRL,
> +			   BIT(4 + offset), value ? BIT(4 + offset) : 0);
> +}
> +
> +static struct gpio_chip template_chip = {
> +	.label			= "tps65086-gpio",
> +	.owner			= THIS_MODULE,
> +	.get_direction		= tps65086_gpio_get_direction,
> +	.direction_input	= tps65086_gpio_direction_input,
> +	.direction_output	= tps65086_gpio_direction_output,
> +	.get			= tps65086_gpio_get,
> +	.set			= tps65086_gpio_set,
> +	.base			= -1,
> +	.ngpio			= 4,
> +	.can_sleep		= true,
> +};
> +
> +static int tps65086_gpio_probe(struct platform_device *pdev)
> +{
> +	struct tps65086_gpio *gpio;
> +	int ret;
> +
> +	gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
> +	if (!gpio)
> +		return -ENOMEM;
> +
> +	platform_set_drvdata(pdev, gpio);
> +
> +	gpio->tps = dev_get_drvdata(pdev->dev.parent);
> +	gpio->chip = template_chip;
> +	gpio->chip.parent = gpio->tps->dev;
> +
> +	ret = gpiochip_add(&gpio->chip);
> +	if (ret < 0) {
> +		dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int tps65086_gpio_remove(struct platform_device *pdev)
> +{
> +	struct tps65086_gpio *gpio = platform_get_drvdata(pdev);
> +
> +	gpiochip_remove(&gpio->chip);
> +
> +	return 0;
> +}
> +
> +static const struct platform_device_id tps65086_gpio_id_table[] = {
> +	{ "tps65086-gpio", },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(platform, tps65086_gpio_id_table);
> +
> +static struct platform_driver tps65086_gpio_driver = {
> +	.driver = {
> +		.name = "tps65086-gpio",
> +	},
> +	.probe = tps65086_gpio_probe,
> +	.remove = tps65086_gpio_remove,
> +	.id_table = tps65086_gpio_id_table,
> +};
> +module_platform_driver(tps65086_gpio_driver);
> +
> +MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>");
> +MODULE_DESCRIPTION("TPS65086 GPIO driver");
> +MODULE_LICENSE("GPL v2");

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  reply	other threads:[~2016-01-26 14:03 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-25 15:50 [PATCH v6 0/3] Add support for the TI TPS65086 PMIC Andrew F. Davis
2016-01-25 15:50 ` [PATCH v6 1/3] Documentation: tps65086: Add DT bindings for the " Andrew F. Davis
     [not found]   ` <1453737012-3130-2-git-send-email-afd-l0cyMroinI0@public.gmane.org>
2016-01-26 14:02     ` Lee Jones
2016-01-27  7:28   ` Lee Jones
2016-01-25 15:50 ` [PATCH v6 2/3] mfd: tps65086: Add driver " Andrew F. Davis
2016-01-27  7:29   ` Lee Jones
2016-01-25 15:50 ` [PATCH v6 3/3] gpio: tps65086: Add GPO " Andrew F. Davis
2016-01-26 14:03   ` Lee Jones [this message]
2016-01-26 14:38     ` Andrew F. Davis
     [not found]       ` <56A784CC.4090902-l0cyMroinI0@public.gmane.org>
2016-01-27  7:29         ` Lee Jones
2016-02-05 14:43   ` Linus Walleij
2016-02-06 16:11     ` Andrew F. Davis

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160126140312.GB3368@x1 \
    --to=lee.jones@linaro.org \
    --cc=afd@ti.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=galak@codeaurora.org \
    --cc=gnurou@gmail.com \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=lgirdwood@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=pawel.moll@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=sameo@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).