[PATCH 0/4] ARM: dts: imx53: update Ka-Ro electronics TX53 module support

devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed

* [PATCH 0/4] ARM: dts: imx53: update Ka-Ro electronics TX53 module support
@ 2016-01-20 13:09 Lothar Waßmann
  2016-01-20 13:09 ` [PATCH 1/4] ARM: dts: imx53: add ethernet PHY supply regulator Lothar Waßmann
                   ` (4 more replies)
  0 siblings, 5 replies; 7+ messages in thread
From: Lothar Waßmann @ 2016-01-20 13:09 UTC (permalink / raw)
  To: Ian Campbell, Kumar Gala, Mark Rutland, Pawel Moll, Rob Herring,
	Russell King, Sascha Hauer, Shawn Guo,
	devicetree-u79uwXL29TY76Z2rM5mHXA,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA

This patchset provides some bugfixes and support for a new display for
the Ka-Ro electronics TX53 modules.

ARM: dts: imx53: add ethernet PHY supply regulator
ARM: dts: imx53: fix LVDS data-mapping and data-width
ARM: dts: imx53: add display timing for NL12880BC20
ARM: dts: imx53-tx53: set correct mclk frequency

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH 1/4] ARM: dts: imx53: add ethernet PHY supply regulator
  2016-01-20 13:09 [PATCH 0/4] ARM: dts: imx53: update Ka-Ro electronics TX53 module support Lothar Waßmann
@ 2016-01-20 13:09 ` Lothar Waßmann
  2016-02-02  6:53   ` Shawn Guo
  2016-01-20 13:09 ` [PATCH 2/4] ARM: dts: imx53: fix LVDS data-mapping and data-width Lothar Waßmann
                   ` (3 subsequent siblings)
  4 siblings, 1 reply; 7+ messages in thread
From: Lothar Waßmann @ 2016-01-20 13:09 UTC (permalink / raw)
  To: Ian Campbell, Kumar Gala, Mark Rutland, Pawel Moll, Rob Herring,
	Russell King, Sascha Hauer, Shawn Guo, devicetree,
	linux-arm-kernel, linux-kernel
  Cc: Lothar Waßmann

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
---
 arch/arm/boot/dts/imx53-tx53.dtsi | 40 ++++++++++++++++++++++++++++++---------
 1 file changed, 31 insertions(+), 9 deletions(-)

diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi
index d3e50b2..8f08389 100644
--- a/arch/arm/boot/dts/imx53-tx53.dtsi
+++ b/arch/arm/boot/dts/imx53-tx53.dtsi
@@ -87,9 +87,20 @@
 			regulator-max-microvolt = <3300000>;
 		};
 
-		reg_can_xcvr: regulator@2 {
+		reg_3v3_etn: regulator@2 {
 			compatible = "regulator-fixed";
 			reg = <2>;
+			regulator-name = "ETN 3V3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_etn_phy>;
+			gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		reg_can_xcvr: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
 			regulator-name = "CAN XCVR";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
@@ -98,9 +109,9 @@
 			gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
 		};
 
-		reg_usbh1_vbus: regulator@3 {
+		reg_usbh1_vbus: regulator@4 {
 			compatible = "regulator-fixed";
-			reg = <3>;
+			reg = <4>;
 			regulator-name = "usbh1_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
@@ -110,9 +121,9 @@
 			enable-active-high;
 		};
 
-		reg_usbotg_vbus: regulator@4 {
+		reg_usbotg_vbus: regulator@5 {
 			compatible = "regulator-fixed";
-			reg = <4>;
+			reg = <5>;
 			regulator-name = "usbotg_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
@@ -204,13 +215,20 @@
 	phy-mode = "rmii";
 	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>;
 	phy-handle = <&phy0>;
+	phy-supply = <&reg_3v3_etn>;
 	mac-address = [000000000000]; /* placeholder; will be overwritten by bootloader */
 	status = "okay";
 
-	phy0: ethernet-phy@0 {
-		interrupt-parent = <&gpio2>;
-		interrupts = <4>;
-		device_type = "ethernet-phy";
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-id0007.c0f1", "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			interrupt-parent = <&gpio2>;
+			interrupts = <4>;
+		};
 	};
 };
 
@@ -309,6 +327,10 @@
 			fsl,pins = <MX53_PAD_DISP0_DAT0__GPIO4_21 0xe0>; /* Flexcan XCVR enable */
 		};
 
+		pinctrl_etn_phy: etn-phygrp {
+			fsl,pins = <MX53_PAD_EIM_D20__GPIO3_20 0xe0>; /* ETN PHY Power enable */
+		};
+
 		pinctrl_ds1339: ds1339grp {
 			fsl,pins = <MX53_PAD_DI0_PIN4__GPIO4_20 0xe0>;
 		};
-- 
2.1.4

^ permalink raw reply related	[flat|nested] 7+ messages in thread

* Re: [PATCH 1/4] ARM: dts: imx53: add ethernet PHY supply regulator
  2016-01-20 13:09 ` [PATCH 1/4] ARM: dts: imx53: add ethernet PHY supply regulator Lothar Waßmann
@ 2016-02-02  6:53   ` Shawn Guo
  0 siblings, 0 replies; 7+ messages in thread
From: Shawn Guo @ 2016-02-02  6:53 UTC (permalink / raw)
  To: Lothar Waßmann
  Cc: Ian Campbell, Kumar Gala, Mark Rutland, Pawel Moll, Rob Herring,
	Russell King, Sascha Hauer, devicetree, linux-arm-kernel,
	linux-kernel

On Wed, Jan 20, 2016 at 02:09:19PM +0100, Lothar Waßmann wrote:
> Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
> ---
>  arch/arm/boot/dts/imx53-tx53.dtsi | 40 ++++++++++++++++++++++++++++++---------
>  1 file changed, 31 insertions(+), 9 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi
> index d3e50b2..8f08389 100644
> --- a/arch/arm/boot/dts/imx53-tx53.dtsi
> +++ b/arch/arm/boot/dts/imx53-tx53.dtsi
> @@ -87,9 +87,20 @@
>  			regulator-max-microvolt = <3300000>;
>  		};
>  
> -		reg_can_xcvr: regulator@2 {
> +		reg_3v3_etn: regulator@2 {

Why cannot this be added as regulator@5 to avoid changing every node?

>  			compatible = "regulator-fixed";
>  			reg = <2>;
> +			regulator-name = "ETN 3V3";
> +			regulator-min-microvolt = <3300000>;
> +			regulator-max-microvolt = <3300000>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_etn_phy>;
> +			gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>;
> +		};
> +
> +		reg_can_xcvr: regulator@3 {
> +			compatible = "regulator-fixed";
> +			reg = <3>;
>  			regulator-name = "CAN XCVR";
>  			regulator-min-microvolt = <3300000>;
>  			regulator-max-microvolt = <3300000>;
> @@ -98,9 +109,9 @@
>  			gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
>  		};
>  
> -		reg_usbh1_vbus: regulator@3 {
> +		reg_usbh1_vbus: regulator@4 {
>  			compatible = "regulator-fixed";
> -			reg = <3>;
> +			reg = <4>;
>  			regulator-name = "usbh1_vbus";
>  			regulator-min-microvolt = <5000000>;
>  			regulator-max-microvolt = <5000000>;
> @@ -110,9 +121,9 @@
>  			enable-active-high;
>  		};
>  
> -		reg_usbotg_vbus: regulator@4 {
> +		reg_usbotg_vbus: regulator@5 {
>  			compatible = "regulator-fixed";
> -			reg = <4>;
> +			reg = <5>;
>  			regulator-name = "usbotg_vbus";
>  			regulator-min-microvolt = <5000000>;
>  			regulator-max-microvolt = <5000000>;
> @@ -204,13 +215,20 @@
>  	phy-mode = "rmii";
>  	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>;
>  	phy-handle = <&phy0>;
> +	phy-supply = <&reg_3v3_etn>;
>  	mac-address = [000000000000]; /* placeholder; will be overwritten by bootloader */
>  	status = "okay";
>  
> -	phy0: ethernet-phy@0 {
> -		interrupt-parent = <&gpio2>;
> -		interrupts = <4>;
> -		device_type = "ethernet-phy";
> +	mdio {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		phy0: ethernet-phy@0 {
> +			compatible = "ethernet-phy-id0007.c0f1", "ethernet-phy-ieee802.3-c22";
> +			reg = <0>;
> +			interrupt-parent = <&gpio2>;
> +			interrupts = <4>;
> +		};

This should be a separate change.

Shawn

>  	};
>  };
>  
> @@ -309,6 +327,10 @@
>  			fsl,pins = <MX53_PAD_DISP0_DAT0__GPIO4_21 0xe0>; /* Flexcan XCVR enable */
>  		};
>  
> +		pinctrl_etn_phy: etn-phygrp {
> +			fsl,pins = <MX53_PAD_EIM_D20__GPIO3_20 0xe0>; /* ETN PHY Power enable */
> +		};
> +
>  		pinctrl_ds1339: ds1339grp {
>  			fsl,pins = <MX53_PAD_DI0_PIN4__GPIO4_20 0xe0>;
>  		};
> -- 
> 2.1.4
> 
> 

^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH 2/4] ARM: dts: imx53: fix LVDS data-mapping and data-width
  2016-01-20 13:09 [PATCH 0/4] ARM: dts: imx53: update Ka-Ro electronics TX53 module support Lothar Waßmann
  2016-01-20 13:09 ` [PATCH 1/4] ARM: dts: imx53: add ethernet PHY supply regulator Lothar Waßmann
@ 2016-01-20 13:09 ` Lothar Waßmann
  2016-01-20 13:09 ` [PATCH 3/4] ARM: dts: imx53: add display timing for NL12880BC20 Lothar Waßmann
                   ` (2 subsequent siblings)
  4 siblings, 0 replies; 7+ messages in thread
From: Lothar Waßmann @ 2016-01-20 13:09 UTC (permalink / raw)
  To: Ian Campbell, Kumar Gala, Mark Rutland, Pawel Moll, Rob Herring,
	Russell King, Sascha Hauer, Shawn Guo, devicetree,
	linux-arm-kernel, linux-kernel
  Cc: Lothar Waßmann

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
---
 arch/arm/boot/dts/imx53-tx53-x13x.dts | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/imx53-tx53-x13x.dts b/arch/arm/boot/dts/imx53-tx53-x13x.dts
index 6480471..6d0b526 100644
--- a/arch/arm/boot/dts/imx53-tx53-x13x.dts
+++ b/arch/arm/boot/dts/imx53-tx53-x13x.dts
@@ -183,13 +183,14 @@
 	status = "okay";
 
 	lvds0: lvds-channel@0 {
-		fsl,data-mapping = "jeida";
-		fsl,data-width = <24>;
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
 		status = "okay";
 
 		display-timings {
-			native-mode = <&lvds_timing0>;
-			lvds_timing0: hsd100pxn1 {
+			native-mode = <&lvds0_timing0>;
+
+			lvds0_timing0: hsd100pxn1 {
 				clock-frequency = <65000000>;
 				hactive = <1024>;
 				vactive = <768>;
@@ -208,13 +209,14 @@
 	};
 
 	lvds1: lvds-channel@1 {
-		fsl,data-mapping = "jeida";
-		fsl,data-width = <24>;
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
 		status = "okay";
 
 		display-timings {
-			native-mode = <&lvds_timing1>;
-			lvds_timing1: hsd100pxn1 {
+			native-mode = <&lvds1_timing0>;
+
+			lvds1_timing0: hsd100pxn1 {
 				clock-frequency = <65000000>;
 				hactive = <1024>;
 				vactive = <768>;
-- 
2.1.4

^ permalink raw reply related	[flat|nested] 7+ messages in thread

* [PATCH 3/4] ARM: dts: imx53: add display timing for NL12880BC20
  2016-01-20 13:09 [PATCH 0/4] ARM: dts: imx53: update Ka-Ro electronics TX53 module support Lothar Waßmann
  2016-01-20 13:09 ` [PATCH 1/4] ARM: dts: imx53: add ethernet PHY supply regulator Lothar Waßmann
  2016-01-20 13:09 ` [PATCH 2/4] ARM: dts: imx53: fix LVDS data-mapping and data-width Lothar Waßmann
@ 2016-01-20 13:09 ` Lothar Waßmann
  2016-01-20 13:09 ` [PATCH 4/4] ARM: dts: imx53-tx53: set correct mclk frequency Lothar Waßmann
       [not found] ` <1453295362-18798-1-git-send-email-LW-bxm8fMRDkQLDiMYJYoSAnRvVK+yQ3ZXh@public.gmane.org>
  4 siblings, 0 replies; 7+ messages in thread
From: Lothar Waßmann @ 2016-01-20 13:09 UTC (permalink / raw)
  To: Ian Campbell, Kumar Gala, Mark Rutland, Pawel Moll, Rob Herring,
	Russell King, Sascha Hauer, Shawn Guo, devicetree,
	linux-arm-kernel, linux-kernel
  Cc: Lothar Waßmann

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
---
 arch/arm/boot/dts/imx53-tx53-x13x.dts | 20 ++++++++++++++++++--
 1 file changed, 18 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx53-tx53-x13x.dts b/arch/arm/boot/dts/imx53-tx53-x13x.dts
index 6d0b526..97d531c 100644
--- a/arch/arm/boot/dts/imx53-tx53-x13x.dts
+++ b/arch/arm/boot/dts/imx53-tx53-x13x.dts
@@ -203,7 +203,23 @@
 				hsync-active = <0>;
 				vsync-active = <0>;
 				de-active = <1>;
-				pixelclk-active = <0>;
+				pixelclk-active = <1>;
+			};
+
+			lvds0_timing1: nl12880bc20 {
+				clock-frequency = <71000000>;
+				hactive = <1280>;
+				vactive = <800>;
+				hback-porch = <50>;
+				hsync-len = <60>;
+				hfront-porch = <50>;
+				vback-porch = <5>;
+				vsync-len = <13>;
+				vfront-porch = <5>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
 			};
 		};
 	};
@@ -229,7 +245,7 @@
 				hsync-active = <0>;
 				vsync-active = <0>;
 				de-active = <1>;
-				pixelclk-active = <0>;
+				pixelclk-active = <1>;
 			};
 		};
 	};
-- 
2.1.4

^ permalink raw reply related	[flat|nested] 7+ messages in thread

* [PATCH 4/4] ARM: dts: imx53-tx53: set correct mclk frequency
  2016-01-20 13:09 [PATCH 0/4] ARM: dts: imx53: update Ka-Ro electronics TX53 module support Lothar Waßmann
                   ` (2 preceding siblings ...)
  2016-01-20 13:09 ` [PATCH 3/4] ARM: dts: imx53: add display timing for NL12880BC20 Lothar Waßmann
@ 2016-01-20 13:09 ` Lothar Waßmann
       [not found] ` <1453295362-18798-1-git-send-email-LW-bxm8fMRDkQLDiMYJYoSAnRvVK+yQ3ZXh@public.gmane.org>
  4 siblings, 0 replies; 7+ messages in thread
From: Lothar Waßmann @ 2016-01-20 13:09 UTC (permalink / raw)
  To: Ian Campbell, Kumar Gala, Mark Rutland, Pawel Moll, Rob Herring,
	Russell King, Sascha Hauer, Shawn Guo, devicetree,
	linux-arm-kernel, linux-kernel
  Cc: Lothar Waßmann

The reference clock for the SGTL5000 is generated by a 26MHz crystal
oscillator on the Ka-Ro electronics STK5 eval kits. Use the correct
frequency setting in DTB.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
---
 arch/arm/boot/dts/imx53-tx53.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi
index 8f08389..d15cc89 100644
--- a/arch/arm/boot/dts/imx53-tx53.dtsi
+++ b/arch/arm/boot/dts/imx53-tx53.dtsi
@@ -37,7 +37,7 @@
 			compatible = "fixed-clock";
 			reg = <0>;
 			#clock-cells = <0>;
-			clock-frequency = <27000000>;
+			clock-frequency = <26000000>;
 		};
 	};
 
-- 
2.1.4

^ permalink raw reply related	[flat|nested] 7+ messages in thread

[parent not found: <1453295362-18798-1-git-send-email-LW-bxm8fMRDkQLDiMYJYoSAnRvVK+yQ3ZXh@public.gmane.org>]

* Re: [PATCH 0/4] ARM: dts: imx53: update Ka-Ro electronics TX53 module support
       [not found] ` <1453295362-18798-1-git-send-email-LW-bxm8fMRDkQLDiMYJYoSAnRvVK+yQ3ZXh@public.gmane.org>
@ 2016-02-02  7:01   ` Shawn Guo
  0 siblings, 0 replies; 7+ messages in thread
From: Shawn Guo @ 2016-02-02  7:01 UTC (permalink / raw)
  To: Lothar Waßmann
  Cc: Ian Campbell, Kumar Gala, Mark Rutland, Pawel Moll, Rob Herring,
	Russell King, Sascha Hauer, devicetree-u79uwXL29TY76Z2rM5mHXA,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA

On Wed, Jan 20, 2016 at 02:09:18PM +0100, Lothar Waßmann wrote:
> ARM: dts: imx53: fix LVDS data-mapping and data-width
> ARM: dts: imx53: add display timing for NL12880BC20
> ARM: dts: imx53-tx53: set correct mclk frequency

Applied these 3, thanks.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2016-02-02  7:01 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-01-20 13:09 [PATCH 0/4] ARM: dts: imx53: update Ka-Ro electronics TX53 module support Lothar Waßmann
2016-01-20 13:09 ` [PATCH 1/4] ARM: dts: imx53: add ethernet PHY supply regulator Lothar Waßmann
2016-02-02  6:53   ` Shawn Guo
2016-01-20 13:09 ` [PATCH 2/4] ARM: dts: imx53: fix LVDS data-mapping and data-width Lothar Waßmann
2016-01-20 13:09 ` [PATCH 3/4] ARM: dts: imx53: add display timing for NL12880BC20 Lothar Waßmann
2016-01-20 13:09 ` [PATCH 4/4] ARM: dts: imx53-tx53: set correct mclk frequency Lothar Waßmann
     [not found] ` <1453295362-18798-1-git-send-email-LW-bxm8fMRDkQLDiMYJYoSAnRvVK+yQ3ZXh@public.gmane.org>
2016-02-02  7:01   ` [PATCH 0/4] ARM: dts: imx53: update Ka-Ro electronics TX53 module support Shawn Guo

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).