* [PATCH v3 1/6] pinctrl: qcom: ipq4019: Add IPQ4019 pinctrl support [not found] <1447975173-29485-1-git-send-email-mmcclint@qca.qualcomm.com> @ 2015-11-19 23:19 ` Matthew McClintock 2015-11-20 16:35 ` Rob Herring ` (3 more replies) 2015-11-19 23:19 ` [PATCH v3 4/6] qcom: ipq4019: Add basic board/dts support for IPQ4019 SoC Matthew McClintock 2015-11-19 23:19 ` [PATCH v3 5/6] dts: ipq4019: Add support for IPQ4019 DK01 board Matthew McClintock 2 siblings, 4 replies; 13+ messages in thread From: Matthew McClintock @ 2015-11-19 23:19 UTC (permalink / raw) To: Andy Gross, linux-arm-msm, devicetree, linux-gpio Cc: Varadarajan Narayanan, linux-kernel, qca-upstream.external, Sricharan R, Mathieu Olivari, Matthew McClintock From: Varadarajan Narayanan <varada@codeaurora.org> Add pinctrl driver support for IPQ4019 platform Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org> --- v3 - update example with actual values from dts - add missing pins 71-99 - drop many functions and stick to basic functionality v2 - add a note in the device tree binding about the TLMM block .../bindings/pinctrl/qcom,ipq4019-pinctrl.txt | 74 ++++ drivers/pinctrl/qcom/Kconfig | 8 + drivers/pinctrl/qcom/Makefile | 1 + drivers/pinctrl/qcom/pinctrl-ipq4019.c | 454 +++++++++++++++++++++ 4 files changed, 537 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt create mode 100644 drivers/pinctrl/qcom/pinctrl-ipq4019.c diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt new file mode 100644 index 0000000..cfb8500 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt @@ -0,0 +1,74 @@ +Qualcomm Atheros IPQ4019 TLMM block + +This is the Top Level Mode Multiplexor block found on the Qualcomm IPQ8019 +platform, it provides pinctrl, pinmux, pinconf, and gpiolib facilities. + +Required properties: +- compatible: "qcom,ipq4019-pinctrl" +- reg: Should be the base address and length of the TLMM block. +- interrupts: Should be the parent IRQ of the TLMM block. +- interrupt-controller: Marks the device node as an interrupt controller. +- #interrupt-cells: Should be two. +- gpio-controller: Marks the device node as a GPIO controller. +- #gpio-cells : Should be two. + The first cell is the gpio pin number and the + second cell is used for optional parameters. + +Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for +a general description of GPIO and interrupt bindings. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +The pin configuration nodes act as a container for an abitrary number of +subnodes. Each of these subnodes represents some desired configuration for a +pin, a group, or a list of pins or groups. This configuration can include the +mux function to select on those pin(s)/group(s), and various pin configuration +parameters, such as pull-up, drive strength, etc. + +The name of each subnode is not important; all subnodes should be enumerated +and processed purely based on their content. + +Each subnode only affects those parameters that are explicitly listed. In +other words, a subnode that lists a mux function but no pin configuration +parameters implies no information about any pin configuration parameters. +Similarly, a pin subnode that describes a pullup parameter implies no +information about e.g. the mux function. + + +The following generic properties as defined in pinctrl-bindings.txt are valid +to specify in a pin configuration subnode: + pins, function, bias-disable, bias-pull-down, bias-pull,up, drive-strength. + +Non-empty subnodes must specify the 'pins' property. +Note that not all properties are valid for all pins. + + +Valid values for qcom,pins are: + gpio0-gpio99 + Supports mux, bias and drive-strength + +Valid values for qcom,function are: +gpio, blsp_uart1, blsp_i2c0, blsp_i2c1, blsp_uart0, blsp_spi1, blsp_spi0 + +Example: + + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq4019-pinctrl"; + reg = <0x1000000 0x300000>; + + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 208 0>; + + serial_pins: serial_pinmux { + mux { + pins = "gpio60", "gpio61"; + function = "blsp_uart0"; + bias-disable; + }; + }; + }; diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig index 383263a..6b898ef 100644 --- a/drivers/pinctrl/qcom/Kconfig +++ b/drivers/pinctrl/qcom/Kconfig @@ -23,6 +23,14 @@ config PINCTRL_APQ8084 This is the pinctrl, pinmux, pinconf and gpiolib driver for the Qualcomm TLMM block found in the Qualcomm APQ8084 platform. +config PINCTRL_IPQ4019 + tristate "Qualcomm IPQ4019 pin controller driver" + depends on GPIOLIB && OF + select PINCTRL_MSM + help + This is the pinctrl, pinmux, pinconf and gpiolib driver for the + Qualcomm TLMM block found in the Qualcomm IPQ4019 platform. + config PINCTRL_IPQ8064 tristate "Qualcomm IPQ8064 pin controller driver" depends on GPIOLIB && OF diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile index 13b190e..fb9a991 100644 --- a/drivers/pinctrl/qcom/Makefile +++ b/drivers/pinctrl/qcom/Makefile @@ -2,6 +2,7 @@ obj-$(CONFIG_PINCTRL_MSM) += pinctrl-msm.o obj-$(CONFIG_PINCTRL_APQ8064) += pinctrl-apq8064.o obj-$(CONFIG_PINCTRL_APQ8084) += pinctrl-apq8084.o +obj-$(CONFIG_PINCTRL_IPQ4019) += pinctrl-ipq4019.o obj-$(CONFIG_PINCTRL_IPQ8064) += pinctrl-ipq8064.o obj-$(CONFIG_PINCTRL_MSM8660) += pinctrl-msm8660.o obj-$(CONFIG_PINCTRL_MSM8960) += pinctrl-msm8960.o diff --git a/drivers/pinctrl/qcom/pinctrl-ipq4019.c b/drivers/pinctrl/qcom/pinctrl-ipq4019.c new file mode 100644 index 0000000..122bfab --- /dev/null +++ b/drivers/pinctrl/qcom/pinctrl-ipq4019.c @@ -0,0 +1,454 @@ +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pinctrl/pinctrl.h> + +#include "pinctrl-msm.h" + +static const struct pinctrl_pin_desc ipq4019_pins[] = { + PINCTRL_PIN(0, "GPIO_0"), + PINCTRL_PIN(1, "GPIO_1"), + PINCTRL_PIN(2, "GPIO_2"), + PINCTRL_PIN(3, "GPIO_3"), + PINCTRL_PIN(4, "GPIO_4"), + PINCTRL_PIN(5, "GPIO_5"), + PINCTRL_PIN(6, "GPIO_6"), + PINCTRL_PIN(7, "GPIO_7"), + PINCTRL_PIN(8, "GPIO_8"), + PINCTRL_PIN(9, "GPIO_9"), + PINCTRL_PIN(10, "GPIO_10"), + PINCTRL_PIN(11, "GPIO_11"), + PINCTRL_PIN(12, "GPIO_12"), + PINCTRL_PIN(13, "GPIO_13"), + PINCTRL_PIN(14, "GPIO_14"), + PINCTRL_PIN(15, "GPIO_15"), + PINCTRL_PIN(16, "GPIO_16"), + PINCTRL_PIN(17, "GPIO_17"), + PINCTRL_PIN(18, "GPIO_18"), + PINCTRL_PIN(19, "GPIO_19"), + PINCTRL_PIN(20, "GPIO_20"), + PINCTRL_PIN(21, "GPIO_21"), + PINCTRL_PIN(22, "GPIO_22"), + PINCTRL_PIN(23, "GPIO_23"), + PINCTRL_PIN(24, "GPIO_24"), + PINCTRL_PIN(25, "GPIO_25"), + PINCTRL_PIN(26, "GPIO_26"), + PINCTRL_PIN(27, "GPIO_27"), + PINCTRL_PIN(28, "GPIO_28"), + PINCTRL_PIN(29, "GPIO_29"), + PINCTRL_PIN(30, "GPIO_30"), + PINCTRL_PIN(31, "GPIO_31"), + PINCTRL_PIN(32, "GPIO_32"), + PINCTRL_PIN(33, "GPIO_33"), + PINCTRL_PIN(34, "GPIO_34"), + PINCTRL_PIN(35, "GPIO_35"), + PINCTRL_PIN(36, "GPIO_36"), + PINCTRL_PIN(37, "GPIO_37"), + PINCTRL_PIN(38, "GPIO_38"), + PINCTRL_PIN(39, "GPIO_39"), + PINCTRL_PIN(40, "GPIO_40"), + PINCTRL_PIN(41, "GPIO_41"), + PINCTRL_PIN(42, "GPIO_42"), + PINCTRL_PIN(43, "GPIO_43"), + PINCTRL_PIN(44, "GPIO_44"), + PINCTRL_PIN(45, "GPIO_45"), + PINCTRL_PIN(46, "GPIO_46"), + PINCTRL_PIN(47, "GPIO_47"), + PINCTRL_PIN(48, "GPIO_48"), + PINCTRL_PIN(49, "GPIO_49"), + PINCTRL_PIN(50, "GPIO_50"), + PINCTRL_PIN(51, "GPIO_51"), + PINCTRL_PIN(52, "GPIO_52"), + PINCTRL_PIN(53, "GPIO_53"), + PINCTRL_PIN(54, "GPIO_54"), + PINCTRL_PIN(55, "GPIO_55"), + PINCTRL_PIN(56, "GPIO_56"), + PINCTRL_PIN(57, "GPIO_57"), + PINCTRL_PIN(58, "GPIO_58"), + PINCTRL_PIN(59, "GPIO_59"), + PINCTRL_PIN(60, "GPIO_60"), + PINCTRL_PIN(61, "GPIO_61"), + PINCTRL_PIN(62, "GPIO_62"), + PINCTRL_PIN(63, "GPIO_63"), + PINCTRL_PIN(64, "GPIO_64"), + PINCTRL_PIN(65, "GPIO_65"), + PINCTRL_PIN(66, "GPIO_66"), + PINCTRL_PIN(67, "GPIO_67"), + PINCTRL_PIN(68, "GPIO_68"), + PINCTRL_PIN(69, "GPIO_69"), + PINCTRL_PIN(70, "GPIO_70"), + PINCTRL_PIN(71, "GPIO_71"), + PINCTRL_PIN(72, "GPIO_72"), + PINCTRL_PIN(73, "GPIO_73"), + PINCTRL_PIN(74, "GPIO_74"), + PINCTRL_PIN(75, "GPIO_75"), + PINCTRL_PIN(76, "GPIO_76"), + PINCTRL_PIN(77, "GPIO_77"), + PINCTRL_PIN(78, "GPIO_78"), + PINCTRL_PIN(79, "GPIO_79"), + PINCTRL_PIN(80, "GPIO_80"), + PINCTRL_PIN(81, "GPIO_81"), + PINCTRL_PIN(82, "GPIO_82"), + PINCTRL_PIN(83, "GPIO_83"), + PINCTRL_PIN(84, "GPIO_84"), + PINCTRL_PIN(85, "GPIO_85"), + PINCTRL_PIN(86, "GPIO_86"), + PINCTRL_PIN(87, "GPIO_87"), + PINCTRL_PIN(88, "GPIO_88"), + PINCTRL_PIN(89, "GPIO_89"), + PINCTRL_PIN(90, "GPIO_90"), + PINCTRL_PIN(91, "GPIO_91"), + PINCTRL_PIN(92, "GPIO_92"), + PINCTRL_PIN(93, "GPIO_93"), + PINCTRL_PIN(94, "GPIO_94"), + PINCTRL_PIN(95, "GPIO_95"), + PINCTRL_PIN(96, "GPIO_96"), + PINCTRL_PIN(97, "GPIO_97"), + PINCTRL_PIN(98, "GPIO_98"), + PINCTRL_PIN(99, "GPIO_99"), +}; + +#define DECLARE_QCA_GPIO_PINS(pin) \ + static const unsigned int gpio##pin##_pins[] = { pin } +DECLARE_QCA_GPIO_PINS(0); +DECLARE_QCA_GPIO_PINS(1); +DECLARE_QCA_GPIO_PINS(2); +DECLARE_QCA_GPIO_PINS(3); +DECLARE_QCA_GPIO_PINS(4); +DECLARE_QCA_GPIO_PINS(5); +DECLARE_QCA_GPIO_PINS(6); +DECLARE_QCA_GPIO_PINS(7); +DECLARE_QCA_GPIO_PINS(8); +DECLARE_QCA_GPIO_PINS(9); +DECLARE_QCA_GPIO_PINS(10); +DECLARE_QCA_GPIO_PINS(11); +DECLARE_QCA_GPIO_PINS(12); +DECLARE_QCA_GPIO_PINS(13); +DECLARE_QCA_GPIO_PINS(14); +DECLARE_QCA_GPIO_PINS(15); +DECLARE_QCA_GPIO_PINS(16); +DECLARE_QCA_GPIO_PINS(17); +DECLARE_QCA_GPIO_PINS(18); +DECLARE_QCA_GPIO_PINS(19); +DECLARE_QCA_GPIO_PINS(20); +DECLARE_QCA_GPIO_PINS(21); +DECLARE_QCA_GPIO_PINS(22); +DECLARE_QCA_GPIO_PINS(23); +DECLARE_QCA_GPIO_PINS(24); +DECLARE_QCA_GPIO_PINS(25); +DECLARE_QCA_GPIO_PINS(26); +DECLARE_QCA_GPIO_PINS(27); +DECLARE_QCA_GPIO_PINS(28); +DECLARE_QCA_GPIO_PINS(29); +DECLARE_QCA_GPIO_PINS(30); +DECLARE_QCA_GPIO_PINS(31); +DECLARE_QCA_GPIO_PINS(32); +DECLARE_QCA_GPIO_PINS(33); +DECLARE_QCA_GPIO_PINS(34); +DECLARE_QCA_GPIO_PINS(35); +DECLARE_QCA_GPIO_PINS(36); +DECLARE_QCA_GPIO_PINS(37); +DECLARE_QCA_GPIO_PINS(38); +DECLARE_QCA_GPIO_PINS(39); +DECLARE_QCA_GPIO_PINS(40); +DECLARE_QCA_GPIO_PINS(41); +DECLARE_QCA_GPIO_PINS(42); +DECLARE_QCA_GPIO_PINS(43); +DECLARE_QCA_GPIO_PINS(44); +DECLARE_QCA_GPIO_PINS(45); +DECLARE_QCA_GPIO_PINS(46); +DECLARE_QCA_GPIO_PINS(47); +DECLARE_QCA_GPIO_PINS(48); +DECLARE_QCA_GPIO_PINS(49); +DECLARE_QCA_GPIO_PINS(50); +DECLARE_QCA_GPIO_PINS(51); +DECLARE_QCA_GPIO_PINS(52); +DECLARE_QCA_GPIO_PINS(53); +DECLARE_QCA_GPIO_PINS(54); +DECLARE_QCA_GPIO_PINS(55); +DECLARE_QCA_GPIO_PINS(56); +DECLARE_QCA_GPIO_PINS(57); +DECLARE_QCA_GPIO_PINS(58); +DECLARE_QCA_GPIO_PINS(59); +DECLARE_QCA_GPIO_PINS(60); +DECLARE_QCA_GPIO_PINS(61); +DECLARE_QCA_GPIO_PINS(62); +DECLARE_QCA_GPIO_PINS(63); +DECLARE_QCA_GPIO_PINS(64); +DECLARE_QCA_GPIO_PINS(65); +DECLARE_QCA_GPIO_PINS(66); +DECLARE_QCA_GPIO_PINS(67); +DECLARE_QCA_GPIO_PINS(68); +DECLARE_QCA_GPIO_PINS(69); +DECLARE_QCA_GPIO_PINS(70); +DECLARE_QCA_GPIO_PINS(71); +DECLARE_QCA_GPIO_PINS(72); +DECLARE_QCA_GPIO_PINS(73); +DECLARE_QCA_GPIO_PINS(74); +DECLARE_QCA_GPIO_PINS(75); +DECLARE_QCA_GPIO_PINS(76); +DECLARE_QCA_GPIO_PINS(77); +DECLARE_QCA_GPIO_PINS(78); +DECLARE_QCA_GPIO_PINS(79); +DECLARE_QCA_GPIO_PINS(80); +DECLARE_QCA_GPIO_PINS(81); +DECLARE_QCA_GPIO_PINS(82); +DECLARE_QCA_GPIO_PINS(83); +DECLARE_QCA_GPIO_PINS(84); +DECLARE_QCA_GPIO_PINS(85); +DECLARE_QCA_GPIO_PINS(86); +DECLARE_QCA_GPIO_PINS(87); +DECLARE_QCA_GPIO_PINS(88); +DECLARE_QCA_GPIO_PINS(89); +DECLARE_QCA_GPIO_PINS(90); +DECLARE_QCA_GPIO_PINS(91); +DECLARE_QCA_GPIO_PINS(92); +DECLARE_QCA_GPIO_PINS(93); +DECLARE_QCA_GPIO_PINS(94); +DECLARE_QCA_GPIO_PINS(95); +DECLARE_QCA_GPIO_PINS(96); +DECLARE_QCA_GPIO_PINS(97); +DECLARE_QCA_GPIO_PINS(98); +DECLARE_QCA_GPIO_PINS(99); + +#define FUNCTION(fname) \ + [qca_mux_##fname] = { \ + .name = #fname, \ + .groups = fname##_groups, \ + .ngroups = ARRAY_SIZE(fname##_groups), \ + } + +#define PINGROUP(id, f1, f2, f3, f4, f5, f6, f7, f8, f9, f10, f11, f12, f13, f14) \ + { \ + .name = "gpio" #id, \ + .pins = gpio##id##_pins, \ + .npins = (unsigned)ARRAY_SIZE(gpio##id##_pins), \ + .funcs = (int[]){ \ + qca_mux_NA, /* gpio mode */ \ + qca_mux_##f1, \ + qca_mux_##f2, \ + qca_mux_##f3, \ + qca_mux_##f4, \ + qca_mux_##f5, \ + qca_mux_##f6, \ + qca_mux_##f7, \ + qca_mux_##f8, \ + qca_mux_##f9, \ + qca_mux_##f10, \ + qca_mux_##f11, \ + qca_mux_##f12, \ + qca_mux_##f13, \ + qca_mux_##f14 \ + }, \ + .nfuncs = 15, \ + .ctl_reg = 0x1000 + 0x10 * id, \ + .io_reg = 0x1004 + 0x10 * id, \ + .intr_cfg_reg = 0x1008 + 0x10 * id, \ + .intr_status_reg = 0x100c + 0x10 * id, \ + .intr_target_reg = 0x400 + 0x4 * id, \ + .mux_bit = 2, \ + .pull_bit = 0, \ + .drv_bit = 6, \ + .oe_bit = 9, \ + .in_bit = 0, \ + .out_bit = 1, \ + .intr_enable_bit = 0, \ + .intr_status_bit = 0, \ + .intr_target_bit = 5, \ + .intr_raw_status_bit = 4, \ + .intr_polarity_bit = 1, \ + .intr_detection_bit = 2, \ + .intr_detection_width = 2, \ + } + + +enum ipq4019_functions { + qca_mux_gpio, + qca_mux_blsp_uart1, + qca_mux_blsp_i2c0, + qca_mux_blsp_i2c1, + qca_mux_blsp_uart0, + qca_mux_blsp_spi1, + qca_mux_blsp_spi0, + qca_mux_NA, +}; + +static const char * const gpio_groups[] = { + "gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7", + "gpio8", "gpio9", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14", + "gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21", + "gpio22", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27", "gpio28", + "gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35", + "gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42", + "gpio43", "gpio44", "gpio45", "gpio46", "gpio47", "gpio48", "gpio49", + "gpio50", "gpio51", "gpio52", "gpio53", "gpio54", "gpio55", "gpio56", + "gpio57", "gpio58", "gpio59", "gpio60", "gpio61", "gpio62", "gpio63", + "gpio64", "gpio65", "gpio66", "gpio67", "gpio68", "gpio69", "gpio70", + "gpio71", "gpio72", "gpio73", "gpio74", "gpio75", "gpio76", "gpio77", + "gpio78", "gpio79", "gpio80", "gpio81", "gpio82", "gpio83", "gpio84", + "gpio85", "gpio86", "gpio87", "gpio88", "gpio89", "gpio90", "gpio91", + "gpio92", "gpio93", "gpio94", "gpio95", "gpio96", "gpio97", "gpio98", + "gpio99", +}; + +static const char * const blsp_uart1_groups[] = { + "gpio8", "gpio9", "gpio10", "gpio11", +}; +static const char * const blsp_i2c0_groups[] = { + "gpio10", "gpio11", "gpio20", "gpio21", "gpio58", "gpio59", +}; +static const char * const blsp_spi0_groups[] = { + "gpio12", "gpio13", "gpio14", "gpio15", "gpio45", + "gpio54", "gpio55", "gpio56", "gpio57", +}; +static const char * const blsp_i2c1_groups[] = { + "gpio12", "gpio13", "gpio34", "gpio35", +}; +static const char * const blsp_uart0_groups[] = { + "gpio16", "gpio17", "gpio60", "gpio61", +}; +static const char * const blsp_spi1_groups[] = { + "gpio44", "gpio45", "gpio46", "gpio47", +}; + +static const struct msm_function ipq4019_functions[] = { + FUNCTION(gpio), + FUNCTION(blsp_uart1), + FUNCTION(blsp_i2c0), + FUNCTION(blsp_i2c1), + FUNCTION(blsp_uart0), + FUNCTION(blsp_spi1), + FUNCTION(blsp_spi0), +}; + +static const struct msm_pingroup ipq4019_groups[] = { + PINGROUP(0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(2, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(3, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(4, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(5, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(6, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(7, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(8, blsp_uart1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(9, blsp_uart1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(10, blsp_uart1, NA, NA, blsp_i2c0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(11, blsp_uart1, NA, NA, blsp_i2c0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(12, blsp_spi0, blsp_i2c1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(13, blsp_spi0, blsp_i2c1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(14, blsp_spi0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(15, blsp_spi0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(16, blsp_uart0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(17, blsp_uart0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(18, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(19, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(20, blsp_i2c0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(21, blsp_i2c0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(22, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(23, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(24, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(25, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(26, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(27, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(28, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(29, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(30, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(31, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(32, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(33, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(34, blsp_i2c1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(35, blsp_i2c1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(36, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(37, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(38, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(39, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(40, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(41, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(42, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(43, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(44, NA, blsp_spi1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(45, NA, blsp_spi1, blsp_spi0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(46, NA, blsp_spi1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(47, NA, blsp_spi1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(48, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(49, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(50, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(51, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(52, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(53, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(54, NA, blsp_spi0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(55, NA, blsp_spi0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(56, NA, blsp_spi0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(57, NA, blsp_spi0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(58, NA, NA, blsp_i2c0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(59, NA, blsp_i2c0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(60, NA, blsp_uart0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(61, NA, blsp_uart0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(62, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(63, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(64, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(65, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(66, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(67, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(68, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(69, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), +}; + +static const struct msm_pinctrl_soc_data ipq4019_pinctrl = { + .pins = ipq4019_pins, + .npins = ARRAY_SIZE(ipq4019_pins), + .functions = ipq4019_functions, + .nfunctions = ARRAY_SIZE(ipq4019_functions), + .groups = ipq4019_groups, + .ngroups = ARRAY_SIZE(ipq4019_groups), + .ngpios = 70, +}; + +static int ipq4019_pinctrl_probe(struct platform_device *pdev) +{ + return msm_pinctrl_probe(pdev, &ipq4019_pinctrl); +} + +static const struct of_device_id ipq4019_pinctrl_of_match[] = { + { .compatible = "qcom,ipq4019-pinctrl", }, + { }, +}; + +static struct platform_driver ipq4019_pinctrl_driver = { + .driver = { + .name = "ipq4019-pinctrl", + .owner = THIS_MODULE, + .of_match_table = ipq4019_pinctrl_of_match, + }, + .probe = ipq4019_pinctrl_probe, + .remove = msm_pinctrl_remove, +}; + +static int __init ipq4019_pinctrl_init(void) +{ + return platform_driver_register(&ipq4019_pinctrl_driver); +} +arch_initcall(ipq4019_pinctrl_init); + +static void __exit ipq4019_pinctrl_exit(void) +{ + platform_driver_unregister(&ipq4019_pinctrl_driver); +} +module_exit(ipq4019_pinctrl_exit); + +MODULE_DESCRIPTION("Qualcomm ipq4019 pinctrl driver"); +MODULE_LICENSE("GPL v2"); +MODULE_DEVICE_TABLE(of, ipq4019_pinctrl_of_match); -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project ^ permalink raw reply related [flat|nested] 13+ messages in thread
* Re: [PATCH v3 1/6] pinctrl: qcom: ipq4019: Add IPQ4019 pinctrl support 2015-11-19 23:19 ` [PATCH v3 1/6] pinctrl: qcom: ipq4019: Add IPQ4019 pinctrl support Matthew McClintock @ 2015-11-20 16:35 ` Rob Herring 2015-12-11 4:03 ` [v3,1/6] " Andy Gross ` (2 subsequent siblings) 3 siblings, 0 replies; 13+ messages in thread From: Rob Herring @ 2015-11-20 16:35 UTC (permalink / raw) To: Matthew McClintock Cc: Andy Gross, linux-arm-msm, devicetree, linux-gpio, Varadarajan Narayanan, linux-kernel, qca-upstream.external, Sricharan R, Mathieu Olivari, Matthew McClintock On Thu, Nov 19, 2015 at 05:19:28PM -0600, Matthew McClintock wrote: > From: Varadarajan Narayanan <varada@codeaurora.org> > > Add pinctrl driver support for IPQ4019 platform > > Signed-off-by: Sricharan R <sricharan@codeaurora.org> > Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> > Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> > Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org> > --- > > v3 > - update example with actual values from dts > - add missing pins 71-99 > - drop many functions and stick to basic functionality > > v2 > - add a note in the device tree binding about the TLMM block > > .../bindings/pinctrl/qcom,ipq4019-pinctrl.txt | 74 ++++ Acked-by: Rob Herring <robh@kernel.org> > drivers/pinctrl/qcom/Kconfig | 8 + > drivers/pinctrl/qcom/Makefile | 1 + > drivers/pinctrl/qcom/pinctrl-ipq4019.c | 454 +++++++++++++++++++++ > 4 files changed, 537 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt > create mode 100644 drivers/pinctrl/qcom/pinctrl-ipq4019.c > > diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt > new file mode 100644 > index 0000000..cfb8500 > --- /dev/null > +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt > @@ -0,0 +1,74 @@ > +Qualcomm Atheros IPQ4019 TLMM block > + > +This is the Top Level Mode Multiplexor block found on the Qualcomm IPQ8019 > +platform, it provides pinctrl, pinmux, pinconf, and gpiolib facilities. > + > +Required properties: > +- compatible: "qcom,ipq4019-pinctrl" > +- reg: Should be the base address and length of the TLMM block. > +- interrupts: Should be the parent IRQ of the TLMM block. > +- interrupt-controller: Marks the device node as an interrupt controller. > +- #interrupt-cells: Should be two. > +- gpio-controller: Marks the device node as a GPIO controller. > +- #gpio-cells : Should be two. > + The first cell is the gpio pin number and the > + second cell is used for optional parameters. > + > +Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for > +a general description of GPIO and interrupt bindings. > + > +Please refer to pinctrl-bindings.txt in this directory for details of the > +common pinctrl bindings used by client devices, including the meaning of the > +phrase "pin configuration node". > + > +The pin configuration nodes act as a container for an abitrary number of > +subnodes. Each of these subnodes represents some desired configuration for a > +pin, a group, or a list of pins or groups. This configuration can include the > +mux function to select on those pin(s)/group(s), and various pin configuration > +parameters, such as pull-up, drive strength, etc. > + > +The name of each subnode is not important; all subnodes should be enumerated > +and processed purely based on their content. > + > +Each subnode only affects those parameters that are explicitly listed. In > +other words, a subnode that lists a mux function but no pin configuration > +parameters implies no information about any pin configuration parameters. > +Similarly, a pin subnode that describes a pullup parameter implies no > +information about e.g. the mux function. > + > + > +The following generic properties as defined in pinctrl-bindings.txt are valid > +to specify in a pin configuration subnode: > + pins, function, bias-disable, bias-pull-down, bias-pull,up, drive-strength. > + > +Non-empty subnodes must specify the 'pins' property. > +Note that not all properties are valid for all pins. > + > + > +Valid values for qcom,pins are: > + gpio0-gpio99 > + Supports mux, bias and drive-strength > + > +Valid values for qcom,function are: > +gpio, blsp_uart1, blsp_i2c0, blsp_i2c1, blsp_uart0, blsp_spi1, blsp_spi0 > + > +Example: > + > + tlmm: pinctrl@1000000 { > + compatible = "qcom,ipq4019-pinctrl"; > + reg = <0x1000000 0x300000>; > + > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupts = <0 208 0>; > + > + serial_pins: serial_pinmux { > + mux { > + pins = "gpio60", "gpio61"; > + function = "blsp_uart0"; > + bias-disable; > + }; > + }; > + }; > diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig > index 383263a..6b898ef 100644 > --- a/drivers/pinctrl/qcom/Kconfig > +++ b/drivers/pinctrl/qcom/Kconfig > @@ -23,6 +23,14 @@ config PINCTRL_APQ8084 > This is the pinctrl, pinmux, pinconf and gpiolib driver for the > Qualcomm TLMM block found in the Qualcomm APQ8084 platform. > > +config PINCTRL_IPQ4019 > + tristate "Qualcomm IPQ4019 pin controller driver" > + depends on GPIOLIB && OF > + select PINCTRL_MSM > + help > + This is the pinctrl, pinmux, pinconf and gpiolib driver for the > + Qualcomm TLMM block found in the Qualcomm IPQ4019 platform. > + > config PINCTRL_IPQ8064 > tristate "Qualcomm IPQ8064 pin controller driver" > depends on GPIOLIB && OF > diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile > index 13b190e..fb9a991 100644 > --- a/drivers/pinctrl/qcom/Makefile > +++ b/drivers/pinctrl/qcom/Makefile > @@ -2,6 +2,7 @@ > obj-$(CONFIG_PINCTRL_MSM) += pinctrl-msm.o > obj-$(CONFIG_PINCTRL_APQ8064) += pinctrl-apq8064.o > obj-$(CONFIG_PINCTRL_APQ8084) += pinctrl-apq8084.o > +obj-$(CONFIG_PINCTRL_IPQ4019) += pinctrl-ipq4019.o > obj-$(CONFIG_PINCTRL_IPQ8064) += pinctrl-ipq8064.o > obj-$(CONFIG_PINCTRL_MSM8660) += pinctrl-msm8660.o > obj-$(CONFIG_PINCTRL_MSM8960) += pinctrl-msm8960.o > diff --git a/drivers/pinctrl/qcom/pinctrl-ipq4019.c b/drivers/pinctrl/qcom/pinctrl-ipq4019.c > new file mode 100644 > index 0000000..122bfab > --- /dev/null > +++ b/drivers/pinctrl/qcom/pinctrl-ipq4019.c > @@ -0,0 +1,454 @@ > +/* > + * Copyright (c) 2015, The Linux Foundation. All rights reserved. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 and > + * only version 2 as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > + > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/platform_device.h> > +#include <linux/pinctrl/pinctrl.h> > + > +#include "pinctrl-msm.h" > + > +static const struct pinctrl_pin_desc ipq4019_pins[] = { > + PINCTRL_PIN(0, "GPIO_0"), > + PINCTRL_PIN(1, "GPIO_1"), > + PINCTRL_PIN(2, "GPIO_2"), > + PINCTRL_PIN(3, "GPIO_3"), > + PINCTRL_PIN(4, "GPIO_4"), > + PINCTRL_PIN(5, "GPIO_5"), > + PINCTRL_PIN(6, "GPIO_6"), > + PINCTRL_PIN(7, "GPIO_7"), > + PINCTRL_PIN(8, "GPIO_8"), > + PINCTRL_PIN(9, "GPIO_9"), > + PINCTRL_PIN(10, "GPIO_10"), > + PINCTRL_PIN(11, "GPIO_11"), > + PINCTRL_PIN(12, "GPIO_12"), > + PINCTRL_PIN(13, "GPIO_13"), > + PINCTRL_PIN(14, "GPIO_14"), > + PINCTRL_PIN(15, "GPIO_15"), > + PINCTRL_PIN(16, "GPIO_16"), > + PINCTRL_PIN(17, "GPIO_17"), > + PINCTRL_PIN(18, "GPIO_18"), > + PINCTRL_PIN(19, "GPIO_19"), > + PINCTRL_PIN(20, "GPIO_20"), > + PINCTRL_PIN(21, "GPIO_21"), > + PINCTRL_PIN(22, "GPIO_22"), > + PINCTRL_PIN(23, "GPIO_23"), > + PINCTRL_PIN(24, "GPIO_24"), > + PINCTRL_PIN(25, "GPIO_25"), > + PINCTRL_PIN(26, "GPIO_26"), > + PINCTRL_PIN(27, "GPIO_27"), > + PINCTRL_PIN(28, "GPIO_28"), > + PINCTRL_PIN(29, "GPIO_29"), > + PINCTRL_PIN(30, "GPIO_30"), > + PINCTRL_PIN(31, "GPIO_31"), > + PINCTRL_PIN(32, "GPIO_32"), > + PINCTRL_PIN(33, "GPIO_33"), > + PINCTRL_PIN(34, "GPIO_34"), > + PINCTRL_PIN(35, "GPIO_35"), > + PINCTRL_PIN(36, "GPIO_36"), > + PINCTRL_PIN(37, "GPIO_37"), > + PINCTRL_PIN(38, "GPIO_38"), > + PINCTRL_PIN(39, "GPIO_39"), > + PINCTRL_PIN(40, "GPIO_40"), > + PINCTRL_PIN(41, "GPIO_41"), > + PINCTRL_PIN(42, "GPIO_42"), > + PINCTRL_PIN(43, "GPIO_43"), > + PINCTRL_PIN(44, "GPIO_44"), > + PINCTRL_PIN(45, "GPIO_45"), > + PINCTRL_PIN(46, "GPIO_46"), > + PINCTRL_PIN(47, "GPIO_47"), > + PINCTRL_PIN(48, "GPIO_48"), > + PINCTRL_PIN(49, "GPIO_49"), > + PINCTRL_PIN(50, "GPIO_50"), > + PINCTRL_PIN(51, "GPIO_51"), > + PINCTRL_PIN(52, "GPIO_52"), > + PINCTRL_PIN(53, "GPIO_53"), > + PINCTRL_PIN(54, "GPIO_54"), > + PINCTRL_PIN(55, "GPIO_55"), > + PINCTRL_PIN(56, "GPIO_56"), > + PINCTRL_PIN(57, "GPIO_57"), > + PINCTRL_PIN(58, "GPIO_58"), > + PINCTRL_PIN(59, "GPIO_59"), > + PINCTRL_PIN(60, "GPIO_60"), > + PINCTRL_PIN(61, "GPIO_61"), > + PINCTRL_PIN(62, "GPIO_62"), > + PINCTRL_PIN(63, "GPIO_63"), > + PINCTRL_PIN(64, "GPIO_64"), > + PINCTRL_PIN(65, "GPIO_65"), > + PINCTRL_PIN(66, "GPIO_66"), > + PINCTRL_PIN(67, "GPIO_67"), > + PINCTRL_PIN(68, "GPIO_68"), > + PINCTRL_PIN(69, "GPIO_69"), > + PINCTRL_PIN(70, "GPIO_70"), > + PINCTRL_PIN(71, "GPIO_71"), > + PINCTRL_PIN(72, "GPIO_72"), > + PINCTRL_PIN(73, "GPIO_73"), > + PINCTRL_PIN(74, "GPIO_74"), > + PINCTRL_PIN(75, "GPIO_75"), > + PINCTRL_PIN(76, "GPIO_76"), > + PINCTRL_PIN(77, "GPIO_77"), > + PINCTRL_PIN(78, "GPIO_78"), > + PINCTRL_PIN(79, "GPIO_79"), > + PINCTRL_PIN(80, "GPIO_80"), > + PINCTRL_PIN(81, "GPIO_81"), > + PINCTRL_PIN(82, "GPIO_82"), > + PINCTRL_PIN(83, "GPIO_83"), > + PINCTRL_PIN(84, "GPIO_84"), > + PINCTRL_PIN(85, "GPIO_85"), > + PINCTRL_PIN(86, "GPIO_86"), > + PINCTRL_PIN(87, "GPIO_87"), > + PINCTRL_PIN(88, "GPIO_88"), > + PINCTRL_PIN(89, "GPIO_89"), > + PINCTRL_PIN(90, "GPIO_90"), > + PINCTRL_PIN(91, "GPIO_91"), > + PINCTRL_PIN(92, "GPIO_92"), > + PINCTRL_PIN(93, "GPIO_93"), > + PINCTRL_PIN(94, "GPIO_94"), > + PINCTRL_PIN(95, "GPIO_95"), > + PINCTRL_PIN(96, "GPIO_96"), > + PINCTRL_PIN(97, "GPIO_97"), > + PINCTRL_PIN(98, "GPIO_98"), > + PINCTRL_PIN(99, "GPIO_99"), > +}; > + > +#define DECLARE_QCA_GPIO_PINS(pin) \ > + static const unsigned int gpio##pin##_pins[] = { pin } > +DECLARE_QCA_GPIO_PINS(0); > +DECLARE_QCA_GPIO_PINS(1); > +DECLARE_QCA_GPIO_PINS(2); > +DECLARE_QCA_GPIO_PINS(3); > +DECLARE_QCA_GPIO_PINS(4); > +DECLARE_QCA_GPIO_PINS(5); > +DECLARE_QCA_GPIO_PINS(6); > +DECLARE_QCA_GPIO_PINS(7); > +DECLARE_QCA_GPIO_PINS(8); > +DECLARE_QCA_GPIO_PINS(9); > +DECLARE_QCA_GPIO_PINS(10); > +DECLARE_QCA_GPIO_PINS(11); > +DECLARE_QCA_GPIO_PINS(12); > +DECLARE_QCA_GPIO_PINS(13); > +DECLARE_QCA_GPIO_PINS(14); > +DECLARE_QCA_GPIO_PINS(15); > +DECLARE_QCA_GPIO_PINS(16); > +DECLARE_QCA_GPIO_PINS(17); > +DECLARE_QCA_GPIO_PINS(18); > +DECLARE_QCA_GPIO_PINS(19); > +DECLARE_QCA_GPIO_PINS(20); > +DECLARE_QCA_GPIO_PINS(21); > +DECLARE_QCA_GPIO_PINS(22); > +DECLARE_QCA_GPIO_PINS(23); > +DECLARE_QCA_GPIO_PINS(24); > +DECLARE_QCA_GPIO_PINS(25); > +DECLARE_QCA_GPIO_PINS(26); > +DECLARE_QCA_GPIO_PINS(27); > +DECLARE_QCA_GPIO_PINS(28); > +DECLARE_QCA_GPIO_PINS(29); > +DECLARE_QCA_GPIO_PINS(30); > +DECLARE_QCA_GPIO_PINS(31); > +DECLARE_QCA_GPIO_PINS(32); > +DECLARE_QCA_GPIO_PINS(33); > +DECLARE_QCA_GPIO_PINS(34); > +DECLARE_QCA_GPIO_PINS(35); > +DECLARE_QCA_GPIO_PINS(36); > +DECLARE_QCA_GPIO_PINS(37); > +DECLARE_QCA_GPIO_PINS(38); > +DECLARE_QCA_GPIO_PINS(39); > +DECLARE_QCA_GPIO_PINS(40); > +DECLARE_QCA_GPIO_PINS(41); > +DECLARE_QCA_GPIO_PINS(42); > +DECLARE_QCA_GPIO_PINS(43); > +DECLARE_QCA_GPIO_PINS(44); > +DECLARE_QCA_GPIO_PINS(45); > +DECLARE_QCA_GPIO_PINS(46); > +DECLARE_QCA_GPIO_PINS(47); > +DECLARE_QCA_GPIO_PINS(48); > +DECLARE_QCA_GPIO_PINS(49); > +DECLARE_QCA_GPIO_PINS(50); > +DECLARE_QCA_GPIO_PINS(51); > +DECLARE_QCA_GPIO_PINS(52); > +DECLARE_QCA_GPIO_PINS(53); > +DECLARE_QCA_GPIO_PINS(54); > +DECLARE_QCA_GPIO_PINS(55); > +DECLARE_QCA_GPIO_PINS(56); > +DECLARE_QCA_GPIO_PINS(57); > +DECLARE_QCA_GPIO_PINS(58); > +DECLARE_QCA_GPIO_PINS(59); > +DECLARE_QCA_GPIO_PINS(60); > +DECLARE_QCA_GPIO_PINS(61); > +DECLARE_QCA_GPIO_PINS(62); > +DECLARE_QCA_GPIO_PINS(63); > +DECLARE_QCA_GPIO_PINS(64); > +DECLARE_QCA_GPIO_PINS(65); > +DECLARE_QCA_GPIO_PINS(66); > +DECLARE_QCA_GPIO_PINS(67); > +DECLARE_QCA_GPIO_PINS(68); > +DECLARE_QCA_GPIO_PINS(69); > +DECLARE_QCA_GPIO_PINS(70); > +DECLARE_QCA_GPIO_PINS(71); > +DECLARE_QCA_GPIO_PINS(72); > +DECLARE_QCA_GPIO_PINS(73); > +DECLARE_QCA_GPIO_PINS(74); > +DECLARE_QCA_GPIO_PINS(75); > +DECLARE_QCA_GPIO_PINS(76); > +DECLARE_QCA_GPIO_PINS(77); > +DECLARE_QCA_GPIO_PINS(78); > +DECLARE_QCA_GPIO_PINS(79); > +DECLARE_QCA_GPIO_PINS(80); > +DECLARE_QCA_GPIO_PINS(81); > +DECLARE_QCA_GPIO_PINS(82); > +DECLARE_QCA_GPIO_PINS(83); > +DECLARE_QCA_GPIO_PINS(84); > +DECLARE_QCA_GPIO_PINS(85); > +DECLARE_QCA_GPIO_PINS(86); > +DECLARE_QCA_GPIO_PINS(87); > +DECLARE_QCA_GPIO_PINS(88); > +DECLARE_QCA_GPIO_PINS(89); > +DECLARE_QCA_GPIO_PINS(90); > +DECLARE_QCA_GPIO_PINS(91); > +DECLARE_QCA_GPIO_PINS(92); > +DECLARE_QCA_GPIO_PINS(93); > +DECLARE_QCA_GPIO_PINS(94); > +DECLARE_QCA_GPIO_PINS(95); > +DECLARE_QCA_GPIO_PINS(96); > +DECLARE_QCA_GPIO_PINS(97); > +DECLARE_QCA_GPIO_PINS(98); > +DECLARE_QCA_GPIO_PINS(99); > + > +#define FUNCTION(fname) \ > + [qca_mux_##fname] = { \ > + .name = #fname, \ > + .groups = fname##_groups, \ > + .ngroups = ARRAY_SIZE(fname##_groups), \ > + } > + > +#define PINGROUP(id, f1, f2, f3, f4, f5, f6, f7, f8, f9, f10, f11, f12, f13, f14) \ > + { \ > + .name = "gpio" #id, \ > + .pins = gpio##id##_pins, \ > + .npins = (unsigned)ARRAY_SIZE(gpio##id##_pins), \ > + .funcs = (int[]){ \ > + qca_mux_NA, /* gpio mode */ \ > + qca_mux_##f1, \ > + qca_mux_##f2, \ > + qca_mux_##f3, \ > + qca_mux_##f4, \ > + qca_mux_##f5, \ > + qca_mux_##f6, \ > + qca_mux_##f7, \ > + qca_mux_##f8, \ > + qca_mux_##f9, \ > + qca_mux_##f10, \ > + qca_mux_##f11, \ > + qca_mux_##f12, \ > + qca_mux_##f13, \ > + qca_mux_##f14 \ > + }, \ > + .nfuncs = 15, \ > + .ctl_reg = 0x1000 + 0x10 * id, \ > + .io_reg = 0x1004 + 0x10 * id, \ > + .intr_cfg_reg = 0x1008 + 0x10 * id, \ > + .intr_status_reg = 0x100c + 0x10 * id, \ > + .intr_target_reg = 0x400 + 0x4 * id, \ > + .mux_bit = 2, \ > + .pull_bit = 0, \ > + .drv_bit = 6, \ > + .oe_bit = 9, \ > + .in_bit = 0, \ > + .out_bit = 1, \ > + .intr_enable_bit = 0, \ > + .intr_status_bit = 0, \ > + .intr_target_bit = 5, \ > + .intr_raw_status_bit = 4, \ > + .intr_polarity_bit = 1, \ > + .intr_detection_bit = 2, \ > + .intr_detection_width = 2, \ > + } > + > + > +enum ipq4019_functions { > + qca_mux_gpio, > + qca_mux_blsp_uart1, > + qca_mux_blsp_i2c0, > + qca_mux_blsp_i2c1, > + qca_mux_blsp_uart0, > + qca_mux_blsp_spi1, > + qca_mux_blsp_spi0, > + qca_mux_NA, > +}; > + > +static const char * const gpio_groups[] = { > + "gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7", > + "gpio8", "gpio9", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14", > + "gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21", > + "gpio22", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27", "gpio28", > + "gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35", > + "gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42", > + "gpio43", "gpio44", "gpio45", "gpio46", "gpio47", "gpio48", "gpio49", > + "gpio50", "gpio51", "gpio52", "gpio53", "gpio54", "gpio55", "gpio56", > + "gpio57", "gpio58", "gpio59", "gpio60", "gpio61", "gpio62", "gpio63", > + "gpio64", "gpio65", "gpio66", "gpio67", "gpio68", "gpio69", "gpio70", > + "gpio71", "gpio72", "gpio73", "gpio74", "gpio75", "gpio76", "gpio77", > + "gpio78", "gpio79", "gpio80", "gpio81", "gpio82", "gpio83", "gpio84", > + "gpio85", "gpio86", "gpio87", "gpio88", "gpio89", "gpio90", "gpio91", > + "gpio92", "gpio93", "gpio94", "gpio95", "gpio96", "gpio97", "gpio98", > + "gpio99", > +}; > + > +static const char * const blsp_uart1_groups[] = { > + "gpio8", "gpio9", "gpio10", "gpio11", > +}; > +static const char * const blsp_i2c0_groups[] = { > + "gpio10", "gpio11", "gpio20", "gpio21", "gpio58", "gpio59", > +}; > +static const char * const blsp_spi0_groups[] = { > + "gpio12", "gpio13", "gpio14", "gpio15", "gpio45", > + "gpio54", "gpio55", "gpio56", "gpio57", > +}; > +static const char * const blsp_i2c1_groups[] = { > + "gpio12", "gpio13", "gpio34", "gpio35", > +}; > +static const char * const blsp_uart0_groups[] = { > + "gpio16", "gpio17", "gpio60", "gpio61", > +}; > +static const char * const blsp_spi1_groups[] = { > + "gpio44", "gpio45", "gpio46", "gpio47", > +}; > + > +static const struct msm_function ipq4019_functions[] = { > + FUNCTION(gpio), > + FUNCTION(blsp_uart1), > + FUNCTION(blsp_i2c0), > + FUNCTION(blsp_i2c1), > + FUNCTION(blsp_uart0), > + FUNCTION(blsp_spi1), > + FUNCTION(blsp_spi0), > +}; > + > +static const struct msm_pingroup ipq4019_groups[] = { > + PINGROUP(0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(2, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(3, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(4, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(5, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(6, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(7, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(8, blsp_uart1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(9, blsp_uart1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(10, blsp_uart1, NA, NA, blsp_i2c0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(11, blsp_uart1, NA, NA, blsp_i2c0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(12, blsp_spi0, blsp_i2c1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(13, blsp_spi0, blsp_i2c1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(14, blsp_spi0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(15, blsp_spi0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(16, blsp_uart0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(17, blsp_uart0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(18, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(19, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(20, blsp_i2c0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(21, blsp_i2c0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(22, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(23, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(24, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(25, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(26, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(27, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(28, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(29, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(30, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(31, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(32, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(33, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(34, blsp_i2c1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(35, blsp_i2c1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(36, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(37, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(38, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(39, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(40, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(41, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(42, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(43, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(44, NA, blsp_spi1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(45, NA, blsp_spi1, blsp_spi0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(46, NA, blsp_spi1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(47, NA, blsp_spi1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(48, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(49, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(50, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(51, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(52, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(53, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(54, NA, blsp_spi0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(55, NA, blsp_spi0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(56, NA, blsp_spi0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(57, NA, blsp_spi0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(58, NA, NA, blsp_i2c0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(59, NA, blsp_i2c0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(60, NA, blsp_uart0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(61, NA, blsp_uart0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(62, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(63, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(64, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(65, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(66, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(67, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(68, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > + PINGROUP(69, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), > +}; > + > +static const struct msm_pinctrl_soc_data ipq4019_pinctrl = { > + .pins = ipq4019_pins, > + .npins = ARRAY_SIZE(ipq4019_pins), > + .functions = ipq4019_functions, > + .nfunctions = ARRAY_SIZE(ipq4019_functions), > + .groups = ipq4019_groups, > + .ngroups = ARRAY_SIZE(ipq4019_groups), > + .ngpios = 70, > +}; > + > +static int ipq4019_pinctrl_probe(struct platform_device *pdev) > +{ > + return msm_pinctrl_probe(pdev, &ipq4019_pinctrl); > +} > + > +static const struct of_device_id ipq4019_pinctrl_of_match[] = { > + { .compatible = "qcom,ipq4019-pinctrl", }, > + { }, > +}; > + > +static struct platform_driver ipq4019_pinctrl_driver = { > + .driver = { > + .name = "ipq4019-pinctrl", > + .owner = THIS_MODULE, > + .of_match_table = ipq4019_pinctrl_of_match, > + }, > + .probe = ipq4019_pinctrl_probe, > + .remove = msm_pinctrl_remove, > +}; > + > +static int __init ipq4019_pinctrl_init(void) > +{ > + return platform_driver_register(&ipq4019_pinctrl_driver); > +} > +arch_initcall(ipq4019_pinctrl_init); > + > +static void __exit ipq4019_pinctrl_exit(void) > +{ > + platform_driver_unregister(&ipq4019_pinctrl_driver); > +} > +module_exit(ipq4019_pinctrl_exit); > + > +MODULE_DESCRIPTION("Qualcomm ipq4019 pinctrl driver"); > +MODULE_LICENSE("GPL v2"); > +MODULE_DEVICE_TABLE(of, ipq4019_pinctrl_of_match); > -- > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, > a Linux Foundation Collaborative Project > > -- > To unsubscribe from this list: send the line "unsubscribe devicetree" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [v3,1/6] pinctrl: qcom: ipq4019: Add IPQ4019 pinctrl support 2015-11-19 23:19 ` [PATCH v3 1/6] pinctrl: qcom: ipq4019: Add IPQ4019 pinctrl support Matthew McClintock 2015-11-20 16:35 ` Rob Herring @ 2015-12-11 4:03 ` Andy Gross 2016-02-15 0:41 ` [PATCH v3 1/6] " Bjorn Andersson 2016-02-16 14:54 ` Linus Walleij 3 siblings, 0 replies; 13+ messages in thread From: Andy Gross @ 2015-12-11 4:03 UTC (permalink / raw) To: Matthew McClintock Cc: Andy Gross, linux-arm-msm, devicetree, linux-gpio, Varadarajan Narayanan, linux-kernel, qca-upstream.external, Sricharan R, Mathieu Olivari, Matthew McClintock On Thu, Nov 19, 2015 at 05:19:28PM -0600, Matthew McClintock wrote: > From: Varadarajan Narayanan <varada@codeaurora.org> > > Add pinctrl driver support for IPQ4019 platform > > Signed-off-by: Sricharan R <sricharan@codeaurora.org> > Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> > Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> > Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org> > Acked-by: Rob Herring <robh@kernel.org> Looks good. Much better than before. Reviewed-by: Andy Gross <andy.gross@linaro.org> ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH v3 1/6] pinctrl: qcom: ipq4019: Add IPQ4019 pinctrl support 2015-11-19 23:19 ` [PATCH v3 1/6] pinctrl: qcom: ipq4019: Add IPQ4019 pinctrl support Matthew McClintock 2015-11-20 16:35 ` Rob Herring 2015-12-11 4:03 ` [v3,1/6] " Andy Gross @ 2016-02-15 0:41 ` Bjorn Andersson 2016-02-16 14:53 ` Linus Walleij 2016-02-16 14:54 ` Linus Walleij 3 siblings, 1 reply; 13+ messages in thread From: Bjorn Andersson @ 2016-02-15 0:41 UTC (permalink / raw) To: Matthew McClintock, Linus Walleij Cc: Andy Gross, linux-arm-msm, devicetree@vger.kernel.org, linux-gpio@vger.kernel.org, Varadarajan Narayanan, linux-kernel@vger.kernel.org, qca-upstream.external, Sricharan R, Mathieu Olivari, Matthew McClintock On Thu, Nov 19, 2015 at 3:19 PM, Matthew McClintock <mmcclint@qca.qualcomm.com> wrote: > From: Varadarajan Narayanan <varada@codeaurora.org> > > Add pinctrl driver support for IPQ4019 platform > > Signed-off-by: Sricharan R <sricharan@codeaurora.org> > Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> > Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> > Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org> > --- I was asked to review this, to make sure that Linus wasn't waiting for my ack or anything. But now I see that you have not added him as a recipient. Please make sure to run ./scripts/get_maintainer.pl and pick appropriate recipients in the future. > > v3 > - update example with actual values from dts > - add missing pins 71-99 > - drop many functions and stick to basic functionality > I hope to see a patch later on adding all those functions back, but that's fine with me. [..] > +static struct platform_driver ipq4019_pinctrl_driver = { > + .driver = { > + .name = "ipq4019-pinctrl", > + .owner = THIS_MODULE, platform_drivers do get their .owner assigned by platform_drive_register(). > + .of_match_table = ipq4019_pinctrl_of_match, > + }, > + .probe = ipq4019_pinctrl_probe, > + .remove = msm_pinctrl_remove, > +}; Part of the .owner above you have my Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> @Linus, this still applies and builds cleanly on linux-next. Would you be okay dropping the owner assignment while applying this patch? Regards, Bjorn ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH v3 1/6] pinctrl: qcom: ipq4019: Add IPQ4019 pinctrl support 2016-02-15 0:41 ` [PATCH v3 1/6] " Bjorn Andersson @ 2016-02-16 14:53 ` Linus Walleij 0 siblings, 0 replies; 13+ messages in thread From: Linus Walleij @ 2016-02-16 14:53 UTC (permalink / raw) To: Bjorn Andersson Cc: Matthew McClintock, Andy Gross, linux-arm-msm, devicetree@vger.kernel.org, linux-gpio@vger.kernel.org, Varadarajan Narayanan, linux-kernel@vger.kernel.org, qca-upstream.external, Sricharan R, Mathieu Olivari, Matthew McClintock On Mon, Feb 15, 2016 at 1:41 AM, Bjorn Andersson <bjorn@kryo.se> wrote: > Part of the .owner above you have my > Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Thx. > @Linus, this still applies and builds cleanly on linux-next. > Would you be okay dropping the owner assignment while applying this patch? Yeah I fix. Yours, Linus Walleij ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH v3 1/6] pinctrl: qcom: ipq4019: Add IPQ4019 pinctrl support 2015-11-19 23:19 ` [PATCH v3 1/6] pinctrl: qcom: ipq4019: Add IPQ4019 pinctrl support Matthew McClintock ` (2 preceding siblings ...) 2016-02-15 0:41 ` [PATCH v3 1/6] " Bjorn Andersson @ 2016-02-16 14:54 ` Linus Walleij 2016-02-16 16:31 ` Matthew McClintock 3 siblings, 1 reply; 13+ messages in thread From: Linus Walleij @ 2016-02-16 14:54 UTC (permalink / raw) To: Matthew McClintock Cc: Andy Gross, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-gpio@vger.kernel.org, Varadarajan Narayanan, linux-kernel@vger.kernel.org, qca-upstream.external, Sricharan R, Mathieu Olivari, Matthew McClintock On Fri, Nov 20, 2015 at 12:19 AM, Matthew McClintock <mmcclint@qca.qualcomm.com> wrote: > From: Varadarajan Narayanan <varada@codeaurora.org> > > Add pinctrl driver support for IPQ4019 platform > > Signed-off-by: Sricharan R <sricharan@codeaurora.org> > Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> > Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> > Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org> > --- > > v3 > - update example with actual values from dts > - add missing pins 71-99 > - drop many functions and stick to basic functionality Patch applied with all the ACKs and stuff, and dropped the .owner assignment as indicated by Björn in the process. Yours, Linus Walleij ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH v3 1/6] pinctrl: qcom: ipq4019: Add IPQ4019 pinctrl support 2016-02-16 14:54 ` Linus Walleij @ 2016-02-16 16:31 ` Matthew McClintock 0 siblings, 0 replies; 13+ messages in thread From: Matthew McClintock @ 2016-02-16 16:31 UTC (permalink / raw) To: Linus Walleij Cc: Matthew McClintock, Andy Gross, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-gpio@vger.kernel.org, Varadarajan Narayanan, linux-kernel@vger.kernel.org, qca-upstream.external, Sricharan R, Mathieu Olivari > On Feb 16, 2016, at 8:54 AM, Linus Walleij <linus.walleij@linaro.org> wrote: > > On Fri, Nov 20, 2015 at 12:19 AM, Matthew McClintock > <mmcclint@qca.qualcomm.com> wrote: > >> From: Varadarajan Narayanan <varada@codeaurora.org> >> >> Add pinctrl driver support for IPQ4019 platform >> >> Signed-off-by: Sricharan R <sricharan@codeaurora.org> >> Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> >> Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> >> Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org> >> --- >> >> v3 >> - update example with actual values from dts >> - add missing pins 71-99 >> - drop many functions and stick to basic functionality > > Patch applied with all the ACKs and stuff, and dropped the .owner > assignment as indicated by Björn in the process. Thanks folks, do plan to add more pinctrl bits once things are validated! Cheers, -M-- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v3 4/6] qcom: ipq4019: Add basic board/dts support for IPQ4019 SoC [not found] <1447975173-29485-1-git-send-email-mmcclint@qca.qualcomm.com> 2015-11-19 23:19 ` [PATCH v3 1/6] pinctrl: qcom: ipq4019: Add IPQ4019 pinctrl support Matthew McClintock @ 2015-11-19 23:19 ` Matthew McClintock 2016-02-08 22:45 ` Stephen Boyd 2015-11-19 23:19 ` [PATCH v3 5/6] dts: ipq4019: Add support for IPQ4019 DK01 board Matthew McClintock 2 siblings, 1 reply; 13+ messages in thread From: Matthew McClintock @ 2015-11-19 23:19 UTC (permalink / raw) To: Andy Gross, linux-arm-msm, devicetree, linux-arm-kernel Cc: Matthew McClintock, Varadarajan Narayanan, linux-kernel, qca-upstream.external From: Matthew McClintock <mmcclint@codeaurora.org> Add initial dts files and SoC support for IPQ4019 Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> --- v2 - add sleep_clk arch/arm/boot/dts/qcom-ipq4019.dtsi | 115 ++++++++++++++++++++++++++++++++++++ 1 file changed, 115 insertions(+) create mode 100644 arch/arm/boot/dts/qcom-ipq4019.dtsi diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi new file mode 100644 index 0000000..fc73822 --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -0,0 +1,115 @@ +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; + +#include "skeleton.dtsi" +#include <dt-bindings/clock/qcom,gcc-ipq4019.h> + +/ { + model = "Qualcomm Technologies, Inc. IPQ4019"; + compatible = "qcom,ipq4019"; + interrupt-parent = <&intc>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + clocks = <&gcc GCC_APPS_CLK_SRC>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x1>; + clocks = <&gcc GCC_APPS_CLK_SRC>; + }; + + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x2>; + clocks = <&gcc GCC_APPS_CLK_SRC>; + }; + + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x3>; + clocks = <&gcc GCC_APPS_CLK_SRC>; + }; + }; + + clocks { + sleep_clk: sleep_clk { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x0b000000 0x1000>, + <0x0b002000 0x1000>; + }; + + gcc: clock-controller@1800000 { + compatible = "qcom,gcc-ipq4019"; + #clock-cells = <1>; + #reset-cells = <1>; + reg = <0x1800000 0x60000>; + }; + + tlmm: pinctrl@0x01000000 { + compatible = "qcom,ipq4019-pinctrl"; + reg = <0x01000000 0x300000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 208 0>; + }; + + serial@78af000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x78af000 0x200>; + interrupts = <0 107 0>; + status = "disabled"; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + }; + + serial@78b0000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x78b0000 0x200>; + interrupts = <0 108 0>; + status = "disabled"; + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + }; + }; +}; -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project ^ permalink raw reply related [flat|nested] 13+ messages in thread
* Re: [PATCH v3 4/6] qcom: ipq4019: Add basic board/dts support for IPQ4019 SoC 2015-11-19 23:19 ` [PATCH v3 4/6] qcom: ipq4019: Add basic board/dts support for IPQ4019 SoC Matthew McClintock @ 2016-02-08 22:45 ` Stephen Boyd 0 siblings, 0 replies; 13+ messages in thread From: Stephen Boyd @ 2016-02-08 22:45 UTC (permalink / raw) To: Matthew McClintock Cc: Andy Gross, linux-arm-msm, devicetree, linux-arm-kernel, Matthew McClintock, linux-kernel, qca-upstream.external, Varadarajan Narayanan On 11/19, Matthew McClintock wrote: > + > +/ { > + > + clocks { > + sleep_clk: sleep_clk { > + compatible = "fixed-clock"; > + clock-frequency = <32768>; > + #clock-cells = <0>; > + }; > + }; The timer should be right here in the SoC file. -- Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project ^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v3 5/6] dts: ipq4019: Add support for IPQ4019 DK01 board [not found] <1447975173-29485-1-git-send-email-mmcclint@qca.qualcomm.com> 2015-11-19 23:19 ` [PATCH v3 1/6] pinctrl: qcom: ipq4019: Add IPQ4019 pinctrl support Matthew McClintock 2015-11-19 23:19 ` [PATCH v3 4/6] qcom: ipq4019: Add basic board/dts support for IPQ4019 SoC Matthew McClintock @ 2015-11-19 23:19 ` Matthew McClintock 2016-02-08 22:43 ` Stephen Boyd 2 siblings, 1 reply; 13+ messages in thread From: Matthew McClintock @ 2015-11-19 23:19 UTC (permalink / raw) To: Andy Gross, linux-arm-msm, devicetree, linux-arm-kernel Cc: Matthew McClintock, linux-kernel, qca-upstream.external, Senthilkumar N L, Varadarajan Narayanan From: Matthew McClintock <mmcclint@codeaurora.org> Initial board support dts files for DK01 board. Signed-off-by: Senthilkumar N L <snlakshm@codeaurora.org> Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> --- v2 - add xo clock arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts | 22 +++++++++ arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi | 59 +++++++++++++++++++++++++ 3 files changed, 82 insertions(+) create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 30bbc37..11b151e 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -505,6 +505,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8074-dragonboard.dtb \ qcom-apq8084-ifc6540.dtb \ qcom-apq8084-mtp.dtb \ + qcom-ipq4019-ap.dk01.1-c1.dtb \ qcom-ipq8064-ap148.dtb \ qcom-msm8660-surf.dtb \ qcom-msm8960-cdp.dtb \ diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts new file mode 100644 index 0000000..0d92f1b --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts @@ -0,0 +1,22 @@ +/* Copyright (c) 2015, The Linux Foundation. All rights reserved. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include "qcom-ipq4019-ap.dk01.1.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C1"; + +}; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi new file mode 100644 index 0000000..fe78f3f --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi @@ -0,0 +1,59 @@ +/* Copyright (c) 2015, The Linux Foundation. All rights reserved. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include "qcom-ipq4019.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1"; + compatible = "qcom,ipq4019"; + + clocks { + xo: xo { + compatible = "fixed-clock"; + clock-frequency = <48000000>; + #clock-cells = <0>; + }; + }; + + soc { + + + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 2 0xf08>, + <1 3 0xf08>, + <1 4 0xf08>, + <1 1 0xf08>; + clock-frequency = <48000000>; + }; + + pinctrl@0x01000000 { + serial_pins: serial_pinmux { + mux { + pins = "gpio60", "gpio61"; + function = "blsp_uart0"; + bias-disable; + }; + }; + }; + + serial@78af000 { + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; + status = "ok"; + }; + }; +}; -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project ^ permalink raw reply related [flat|nested] 13+ messages in thread
* Re: [PATCH v3 5/6] dts: ipq4019: Add support for IPQ4019 DK01 board 2015-11-19 23:19 ` [PATCH v3 5/6] dts: ipq4019: Add support for IPQ4019 DK01 board Matthew McClintock @ 2016-02-08 22:43 ` Stephen Boyd 2016-02-16 20:43 ` Matthew McClintock 0 siblings, 1 reply; 13+ messages in thread From: Stephen Boyd @ 2016-02-08 22:43 UTC (permalink / raw) To: Matthew McClintock Cc: Andy Gross, linux-arm-msm, devicetree, linux-arm-kernel, Matthew McClintock, linux-kernel, qca-upstream.external, Senthilkumar N L, Varadarajan Narayanan On 11/19, Matthew McClintock wrote: > + > +/ { > + model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1"; > + compatible = "qcom,ipq4019"; > + > + clocks { > + xo: xo { > + compatible = "fixed-clock"; > + clock-frequency = <48000000>; > + #clock-cells = <0>; > + }; > + }; Is there a reason the xo is here and the sleep clk is in the SoC dtsi file? Both are board clocks so I would think they would be added in the same place. > + > + soc { > + > + > + timer { > + compatible = "arm,armv7-timer"; > + interrupts = <1 2 0xf08>, > + <1 3 0xf08>, > + <1 4 0xf08>, > + <1 1 0xf08>; > + clock-frequency = <48000000>; > + }; The timer shouldn't be part of the SoC node (it has no reg property). -- Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH v3 5/6] dts: ipq4019: Add support for IPQ4019 DK01 board 2016-02-08 22:43 ` Stephen Boyd @ 2016-02-16 20:43 ` Matthew McClintock [not found] ` <59152C1B-683F-417D-9C23-C6E3F53D7096-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> 0 siblings, 1 reply; 13+ messages in thread From: Matthew McClintock @ 2016-02-16 20:43 UTC (permalink / raw) To: Stephen Boyd Cc: Matthew McClintock, Andy Gross, linux-arm-msm, devicetree, linux-arm-kernel, linux-kernel, qca-upstream.external, Senthilkumar N L, Varadarajan Narayanan On Feb 8, 2016, at 4:43 PM, Stephen Boyd <sboyd@codeaurora.org> wrote: > > On 11/19, Matthew McClintock wrote: >> + >> +/ { >> + model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1"; >> + compatible = "qcom,ipq4019"; >> + >> + clocks { >> + xo: xo { >> + compatible = "fixed-clock"; >> + clock-frequency = <48000000>; >> + #clock-cells = <0>; >> + }; >> + }; > > Is there a reason the xo is here and the sleep clk is in the SoC > dtsi file? Both are board clocks so I would think they would be > added in the same place. I’m a little bit confused and I wanted to confirm. I can see the xo clock is on the board itself. However, the sleep_clk is not, can you clarify why they would both be in the same place? -M-- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 13+ messages in thread
[parent not found: <59152C1B-683F-417D-9C23-C6E3F53D7096-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>]
* Re: [PATCH v3 5/6] dts: ipq4019: Add support for IPQ4019 DK01 board [not found] ` <59152C1B-683F-417D-9C23-C6E3F53D7096-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> @ 2016-02-19 2:43 ` Stephen Boyd 0 siblings, 0 replies; 13+ messages in thread From: Stephen Boyd @ 2016-02-19 2:43 UTC (permalink / raw) To: Matthew McClintock Cc: Matthew McClintock, Andy Gross, linux-arm-msm-u79uwXL29TY76Z2rM5mHXA, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-kernel-u79uwXL29TY76Z2rM5mHXA, qca-upstream.external-A+ZNKFmMK5xy9aJCnZT0Uw, Senthilkumar N L, Varadarajan Narayanan On 02/16, Matthew McClintock wrote: > On Feb 8, 2016, at 4:43 PM, Stephen Boyd <sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> wrote: > > > > On 11/19, Matthew McClintock wrote: > >> + > >> +/ { > >> + model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1"; > >> + compatible = "qcom,ipq4019"; > >> + > >> + clocks { > >> + xo: xo { > >> + compatible = "fixed-clock"; > >> + clock-frequency = <48000000>; > >> + #clock-cells = <0>; > >> + }; > >> + }; > > > > Is there a reason the xo is here and the sleep clk is in the SoC > > dtsi file? Both are board clocks so I would think they would be > > added in the same place. > > I’m a little bit confused and I wanted to confirm. I can see the xo clock is on the board itself. However, the sleep_clk is not, can you clarify why they would both be in the same place? > The sleep clk is typically a pin on the SoC package. Look at your schematic. Same goes for the XO. -- Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2016-02-19 2:43 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <1447975173-29485-1-git-send-email-mmcclint@qca.qualcomm.com>
2015-11-19 23:19 ` [PATCH v3 1/6] pinctrl: qcom: ipq4019: Add IPQ4019 pinctrl support Matthew McClintock
2015-11-20 16:35 ` Rob Herring
2015-12-11 4:03 ` [v3,1/6] " Andy Gross
2016-02-15 0:41 ` [PATCH v3 1/6] " Bjorn Andersson
2016-02-16 14:53 ` Linus Walleij
2016-02-16 14:54 ` Linus Walleij
2016-02-16 16:31 ` Matthew McClintock
2015-11-19 23:19 ` [PATCH v3 4/6] qcom: ipq4019: Add basic board/dts support for IPQ4019 SoC Matthew McClintock
2016-02-08 22:45 ` Stephen Boyd
2015-11-19 23:19 ` [PATCH v3 5/6] dts: ipq4019: Add support for IPQ4019 DK01 board Matthew McClintock
2016-02-08 22:43 ` Stephen Boyd
2016-02-16 20:43 ` Matthew McClintock
[not found] ` <59152C1B-683F-417D-9C23-C6E3F53D7096-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-02-19 2:43 ` Stephen Boyd
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).