From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stephen Boyd Subject: Re: [PATCH v2] clk: lpc32xx: add HCLK PLL output configuration Date: Wed, 10 Feb 2016 12:46:37 -0800 Message-ID: <20160210204637.GJ30978@codeaurora.org> References: <1455130352-25860-1-git-send-email-slemieux.tyco@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <1455130352-25860-1-git-send-email-slemieux.tyco-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: slemieux.tyco-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org, stigge-uj/7R2tJ6VmzQB+pC5nmwQ@public.gmane.org, vz-ChpfBGZJDbMAvxtiuMwx3w@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: devicetree@vger.kernel.org On 02/10, slemieux.tyco-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org wrote: > From: Sylvain Lemieux > > This patch add the support to setup the HCLK PLL output > using the "assigned-clock-rates" parameter in the device tree. > > If the option is not use, the clock setup by the kickstart > and/or bootloader remain unchanged. > > The previous kernel version did not change the clock frequency > output setup by the kickstart and/or bootloader; > this version always setup the clock frequency output to 208MHz. > > Signed-off-by: Sylvain Lemieux > --- I couldn't find any usage of this driver in the tree so I just applied this to clk-next. If it needs to go into some immutable branch please let me know. -- Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html