[RESEND PATCH v4 0/4] ARM: dts: use syscon property instead of ctrl-module

devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed

* [RESEND PATCH v4 0/4] ARM: dts: use syscon property instead of ctrl-module
@ 2015-12-21  9:13 Kishon Vijay Abraham I
  2015-12-21  9:13 ` [PATCH v4 1/4] ARM: dts: dra7: Add dt node for the sycon pcie Kishon Vijay Abraham I
                   ` (4 more replies)
  0 siblings, 5 replies; 6+ messages in thread
From: Kishon Vijay Abraham I @ 2015-12-21  9:13 UTC (permalink / raw)
  To: devicetree-u79uwXL29TY76Z2rM5mHXA,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
	linux-omap-u79uwXL29TY76Z2rM5mHXA, tony-4v6yS6AI5VpBDgjK7y7TUQ,
	bcousson-rdvid1DuHRBWk0Htik3J/w
  Cc: kishon-l0cyMroinI0, linux-lFZ/pmaqli7XmaaqVzeoHQ,
	robh+dt-DgEjT+Ai2ygdnm+yROfE0A, pawel.moll-5wv7dgnIgG8,
	mark.rutland-5wv7dgnIgG8, ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
	galak-sgV2jX0FEOL9JmXXK+q4OQ, rogerq-l0cyMroinI0

This series is basically to deprecate using ctrl-module property and use
corresponding syscon properties to program the control module registers.

Changes from v3:
*) Renamed 'tisyscon@1c24' node to 'scm_conf@1c24'

Changes from v2:
No changes.

Changes from v1:
*) Squashed the patches that replaces "ctrl-module" with
   "syscon-phy-power"
*) Added "syscon-phy-power" for SATA dt node in OMAP5 which was missed
   earlier
*) removed _ARM: dts: omap4: Use "syscon-otghs" instead of "ctrl-module"
   in USB node_. It will be done later.

Changes from [1] in PHY patches include
*) cleanup ti_pipe3_probe
*) have mask, power_on and power_off values in usb_phy_data for
   omap-usb2 phy

This series should be merged only after [2]
Kishon Vijay Abraham I (4):
  ARM: dts: dra7: Add dt node for the sycon pcie
  ARM: dts: dra7: Use "syscon-phy-power" and "syscon-pcs" in PCIe PHY
    node
  ARM: dts: dra7: Use "ti,dra7x-usb2-phy2" compatible string for USB2
    PHY2
  ARM: dts: <am4372/dra7/omap5>: Use "syscon-phy-power" instead of
    "ctrl-module"

 arch/arm/boot/dts/am4372.dtsi |   16 ++-------
 arch/arm/boot/dts/dra7.dtsi   |   75 ++++++++++++-----------------------------
 arch/arm/boot/dts/omap5.dtsi  |   26 ++------------
 3 files changed, 26 insertions(+), 91 deletions(-)

-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH v4 1/4] ARM: dts: dra7: Add dt node for the sycon pcie
  2015-12-21  9:13 [RESEND PATCH v4 0/4] ARM: dts: use syscon property instead of ctrl-module Kishon Vijay Abraham I
@ 2015-12-21  9:13 ` Kishon Vijay Abraham I
  2015-12-21  9:13 ` [PATCH v4 2/4] ARM: dts: dra7: Use "syscon-phy-power" and "syscon-pcs" in PCIe PHY node Kishon Vijay Abraham I
                   ` (3 subsequent siblings)
  4 siblings, 0 replies; 6+ messages in thread
From: Kishon Vijay Abraham I @ 2015-12-21  9:13 UTC (permalink / raw)
  To: devicetree, linux-kernel, linux-arm-kernel, linux-omap, tony,
	bcousson
  Cc: mark.rutland, linux, pawel.moll, ijc+devicetree, kishon, robh+dt,
	galak, rogerq

Add new device tree node for the control module register space where
PCIe registers are present.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 arch/arm/boot/dts/dra7.dtsi |    5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index fe99231..9ab7b6a 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -155,6 +155,11 @@
 					compatible = "syscon";
 					reg = <0x1c04 0x0020>;
 				};
+
+				scm_conf_pcie: scm_conf@1c24 {
+					compatible = "syscon";
+					reg = <0x1c24 0x0024>;
+				};
 			};
 
 			cm_core_aon: cm_core_aon@5000 {
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 6+ messages in thread

* [PATCH v4 2/4] ARM: dts: dra7: Use "syscon-phy-power" and "syscon-pcs" in PCIe PHY node
  2015-12-21  9:13 [RESEND PATCH v4 0/4] ARM: dts: use syscon property instead of ctrl-module Kishon Vijay Abraham I
  2015-12-21  9:13 ` [PATCH v4 1/4] ARM: dts: dra7: Add dt node for the sycon pcie Kishon Vijay Abraham I
@ 2015-12-21  9:13 ` Kishon Vijay Abraham I
  2015-12-21  9:13 ` [PATCH v4 3/4] ARM: dts: dra7: Use "ti, dra7x-usb2-phy2" compatible string for USB2 PHY2 Kishon Vijay Abraham I
                   ` (2 subsequent siblings)
  4 siblings, 0 replies; 6+ messages in thread
From: Kishon Vijay Abraham I @ 2015-12-21  9:13 UTC (permalink / raw)
  To: devicetree, linux-kernel, linux-arm-kernel, linux-omap, tony,
	bcousson
  Cc: kishon, linux, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
	galak, rogerq

Add "syscon-phy-power" property and "syscon-pcs" property which can
be used to perform the control module initializations and remove
the deprecated "ctrl-module" property from PCIe PHY dt nodes.

Phandle to "sysclk" clock node is also added to the PCIe PHY node
since some of the syscon initializations is based on system clock
frequency.

Since "omap_control_pcie1phy" and "omap_control_pcie2phy" devicetree
nodes are no longer used, remove it.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 arch/arm/boot/dts/dra7.dtsi |   33 ++++++++++-----------------------
 1 file changed, 10 insertions(+), 23 deletions(-)

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 9ab7b6a..41a3d35 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -1204,16 +1204,18 @@
 				reg = <0x4a094000 0x80>, /* phy_rx */
 				      <0x4a094400 0x64>; /* phy_tx */
 				reg-names = "phy_rx", "phy_tx";
-				ctrl-module = <&omap_control_pcie1phy>;
+				syscon-phy-power = <&scm_conf_pcie 0x1c>;
+				syscon-pcs = <&scm_conf_pcie 0x10>;
 				clocks = <&dpll_pcie_ref_ck>,
 					 <&dpll_pcie_ref_m2ldo_ck>,
 					 <&optfclk_pciephy1_32khz>,
 					 <&optfclk_pciephy1_clk>,
 					 <&optfclk_pciephy1_div_clk>,
-					 <&optfclk_pciephy_div>;
+					 <&optfclk_pciephy_div>,
+					 <&sys_clkin1>;
 				clock-names = "dpll_ref", "dpll_ref_m2",
 					      "wkupclk", "refclk",
-					      "div-clk", "phy-div";
+					      "div-clk", "phy-div", "sysclk";
 				#phy-cells = <0>;
 			};
 
@@ -1222,16 +1224,18 @@
 				reg = <0x4a095000 0x80>, /* phy_rx */
 				      <0x4a095400 0x64>; /* phy_tx */
 				reg-names = "phy_rx", "phy_tx";
-				ctrl-module = <&omap_control_pcie2phy>;
+				syscon-phy-power = <&scm_conf_pcie 0x20>;
+				syscon-pcs = <&scm_conf_pcie 0x10>;
 				clocks = <&dpll_pcie_ref_ck>,
 					 <&dpll_pcie_ref_m2ldo_ck>,
 					 <&optfclk_pciephy2_32khz>,
 					 <&optfclk_pciephy2_clk>,
 					 <&optfclk_pciephy2_div_clk>,
-					 <&optfclk_pciephy_div>;
+					 <&optfclk_pciephy_div>,
+					 <&sys_clkin1>;
 				clock-names = "dpll_ref", "dpll_ref_m2",
 					      "wkupclk", "refclk",
-					      "div-clk", "phy-div";
+					      "div-clk", "phy-div", "sysclk";
 				#phy-cells = <0>;
 				status = "disabled";
 			};
@@ -1247,23 +1251,6 @@
 			ti,hwmods = "sata";
 		};
 
-		omap_control_pcie1phy: control-phy@0x4a003c40 {
-			compatible = "ti,control-phy-pcie";
-			reg = <0x4a003c40 0x4>, <0x4a003c14 0x4>, <0x4a003c34 0x4>;
-			reg-names = "power", "control_sma", "pcie_pcs";
-			clocks = <&sys_clkin1>;
-			clock-names = "sysclk";
-		};
-
-		omap_control_pcie2phy: control-pcie@0x4a003c44 {
-			compatible = "ti,control-phy-pcie";
-			reg = <0x4a003c44 0x4>, <0x4a003c14 0x4>, <0x4a003c34 0x4>;
-			reg-names = "power", "control_sma", "pcie_pcs";
-			clocks = <&sys_clkin1>;
-			clock-names = "sysclk";
-			status = "disabled";
-		};
-
 		rtc: rtc@48838000 {
 			compatible = "ti,am3352-rtc";
 			reg = <0x48838000 0x100>;
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 6+ messages in thread

* [PATCH v4 3/4] ARM: dts: dra7: Use "ti, dra7x-usb2-phy2" compatible string for USB2 PHY2
  2015-12-21  9:13 [RESEND PATCH v4 0/4] ARM: dts: use syscon property instead of ctrl-module Kishon Vijay Abraham I
  2015-12-21  9:13 ` [PATCH v4 1/4] ARM: dts: dra7: Add dt node for the sycon pcie Kishon Vijay Abraham I
  2015-12-21  9:13 ` [PATCH v4 2/4] ARM: dts: dra7: Use "syscon-phy-power" and "syscon-pcs" in PCIe PHY node Kishon Vijay Abraham I
@ 2015-12-21  9:13 ` Kishon Vijay Abraham I
  2015-12-21  9:13 ` [PATCH v4 4/4] ARM: dts: <am4372/dra7/omap5>: Use "syscon-phy-power" instead of "ctrl-module" Kishon Vijay Abraham I
       [not found] ` <1450689201-16973-1-git-send-email-kishon-l0cyMroinI0@public.gmane.org>
  4 siblings, 0 replies; 6+ messages in thread
From: Kishon Vijay Abraham I @ 2015-12-21  9:13 UTC (permalink / raw)
  To: devicetree, linux-kernel, linux-arm-kernel, linux-omap, tony,
	bcousson
  Cc: mark.rutland, linux, pawel.moll, ijc+devicetree, kishon, robh+dt,
	galak, rogerq

The USB2 PHY2 has a different register map compared to USB2 PHY1
to power on/off the PHY. In order to handle it, use the new compatible
string "ti,dra7x-usb2-phy2" for the second instance of USB2 PHY.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 arch/arm/boot/dts/dra7.dtsi |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 41a3d35..7d35b94 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -1299,7 +1299,8 @@
 			};
 
 			usb2_phy2: phy@4a085000 {
-				compatible = "ti,omap-usb2";
+				compatible = "ti,dra7x-usb2-phy2",
+					     "ti,omap-usb2";
 				reg = <0x4a085000 0x400>;
 				ctrl-module = <&omap_control_usb2phy2>;
 				clocks = <&usb_phy2_always_on_clk32k>,
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 6+ messages in thread

* [PATCH v4 4/4] ARM: dts: <am4372/dra7/omap5>: Use "syscon-phy-power" instead of "ctrl-module"
  2015-12-21  9:13 [RESEND PATCH v4 0/4] ARM: dts: use syscon property instead of ctrl-module Kishon Vijay Abraham I
                   ` (2 preceding siblings ...)
  2015-12-21  9:13 ` [PATCH v4 3/4] ARM: dts: dra7: Use "ti, dra7x-usb2-phy2" compatible string for USB2 PHY2 Kishon Vijay Abraham I
@ 2015-12-21  9:13 ` Kishon Vijay Abraham I
       [not found] ` <1450689201-16973-1-git-send-email-kishon-l0cyMroinI0@public.gmane.org>
  4 siblings, 0 replies; 6+ messages in thread
From: Kishon Vijay Abraham I @ 2015-12-21  9:13 UTC (permalink / raw)
  To: devicetree, linux-kernel, linux-arm-kernel, linux-omap, tony,
	bcousson
  Cc: kishon, linux, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
	galak, rogerq

Add "syscon-phy-power" property and remove the deprecated "ctrl-module"
property from SATA and USB PHY node. Also remove the unused control
module dt nodes.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 arch/arm/boot/dts/am4372.dtsi |   16 ++--------------
 arch/arm/boot/dts/dra7.dtsi   |   34 ++++------------------------------
 arch/arm/boot/dts/omap5.dtsi  |   26 +++-----------------------
 3 files changed, 9 insertions(+), 67 deletions(-)

diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index d83ff9c..f42d4a4 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -853,18 +853,6 @@
 			status = "disabled";
 		};
 
-		am43xx_control_usb2phy1: control-phy@44e10620 {
-			compatible = "ti,control-phy-usb2-am437";
-			reg = <0x44e10620 0x4>;
-			reg-names = "power";
-		};
-
-		am43xx_control_usb2phy2: control-phy@0x44e10628 {
-			compatible = "ti,control-phy-usb2-am437";
-			reg = <0x44e10628 0x4>;
-			reg-names = "power";
-		};
-
 		ocp2scp0: ocp2scp@483a8000 {
 			compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp";
 			#address-cells = <1>;
@@ -875,7 +863,7 @@
 			usb2_phy1: phy@483a8000 {
 				compatible = "ti,am437x-usb2";
 				reg = <0x483a8000 0x8000>;
-				ctrl-module = <&am43xx_control_usb2phy1>;
+				syscon-phy-power = <&scm_conf 0x620>;
 				clocks = <&usb_phy0_always_on_clk32k>,
 					 <&usb_otg_ss0_refclk960m>;
 				clock-names = "wkupclk", "refclk";
@@ -894,7 +882,7 @@
 			usb2_phy2: phy@483e8000 {
 				compatible = "ti,am437x-usb2";
 				reg = <0x483e8000 0x8000>;
-				ctrl-module = <&am43xx_control_usb2phy2>;
+				syscon-phy-power = <&scm_conf 0x628>;
 				clocks = <&usb_phy1_always_on_clk32k>,
 					 <&usb_otg_ss1_refclk960m>;
 				clock-names = "wkupclk", "refclk";
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 7d35b94..8a1c0c4 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -1170,14 +1170,6 @@
 			status = "disabled";
 		};
 
-		omap_control_sata: control-phy@4a002374 {
-			compatible = "ti,control-phy-pipe3";
-			reg = <0x4a002374 0x4>;
-			reg-names = "power";
-			clocks = <&sys_clkin1>;
-			clock-names = "sysclk";
-		};
-
 		/* OCP2SCP3 */
 		ocp2scp@4a090000 {
 			compatible = "ti,omap-ocp2scp";
@@ -1192,7 +1184,7 @@
 				      <0x4A096400 0x64>, /* phy_tx */
 				      <0x4A096800 0x40>; /* pll_ctrl */
 				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
-				ctrl-module = <&omap_control_sata>;
+				syscon-phy-power = <&scm_conf 0x374>;
 				clocks = <&sys_clkin1>, <&sata_ref_clk>;
 				clock-names = "sysclk", "refclk";
 				syscon-pllreset = <&scm_conf 0x3fc>;
@@ -1260,24 +1252,6 @@
 			clocks = <&sys_32k_ck>;
 		};
 
-		omap_control_usb2phy1: control-phy@4a002300 {
-			compatible = "ti,control-phy-usb2";
-			reg = <0x4a002300 0x4>;
-			reg-names = "power";
-		};
-
-		omap_control_usb3phy1: control-phy@4a002370 {
-			compatible = "ti,control-phy-pipe3";
-			reg = <0x4a002370 0x4>;
-			reg-names = "power";
-		};
-
-		omap_control_usb2phy2: control-phy@0x4a002e74 {
-			compatible = "ti,control-phy-usb2-dra7";
-			reg = <0x4a002e74 0x4>;
-			reg-names = "power";
-		};
-
 		/* OCP2SCP1 */
 		ocp2scp@4a080000 {
 			compatible = "ti,omap-ocp2scp";
@@ -1290,7 +1264,7 @@
 			usb2_phy1: phy@4a084000 {
 				compatible = "ti,omap-usb2";
 				reg = <0x4a084000 0x400>;
-				ctrl-module = <&omap_control_usb2phy1>;
+				syscon-phy-power = <&scm_conf 0x300>;
 				clocks = <&usb_phy1_always_on_clk32k>,
 					 <&usb_otg_ss1_refclk960m>;
 				clock-names =	"wkupclk",
@@ -1302,7 +1276,7 @@
 				compatible = "ti,dra7x-usb2-phy2",
 					     "ti,omap-usb2";
 				reg = <0x4a085000 0x400>;
-				ctrl-module = <&omap_control_usb2phy2>;
+				syscon-phy-power = <&scm_conf 0xe74>;
 				clocks = <&usb_phy2_always_on_clk32k>,
 					 <&usb_otg_ss2_refclk960m>;
 				clock-names =	"wkupclk",
@@ -1316,7 +1290,7 @@
 				      <0x4a084800 0x64>,
 				      <0x4a084c00 0x40>;
 				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
-				ctrl-module = <&omap_control_usb3phy1>;
+				syscon-phy-power = <&scm_conf 0x370>;
 				clocks = <&usb_phy3_always_on_clk32k>,
 					 <&sys_clkin1>,
 					 <&usb_otg_ss1_refclk960m>;
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 4c04389..f6d6d91 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -850,18 +850,6 @@
 			hw-caps-temp-alert;
 		};
 
-		omap_control_usb2phy: control-phy@4a002300 {
-			compatible = "ti,control-phy-usb2";
-			reg = <0x4a002300 0x4>;
-			reg-names = "power";
-		};
-
-		omap_control_usb3phy: control-phy@4a002370 {
-			compatible = "ti,control-phy-pipe3";
-			reg = <0x4a002370 0x4>;
-			reg-names = "power";
-		};
-
 		usb3: omap_dwc3@4a020000 {
 			compatible = "ti,dwc3";
 			ti,hwmods = "usb_otg_ss";
@@ -897,7 +885,7 @@
 			usb2_phy: usb2phy@4a084000 {
 				compatible = "ti,omap-usb2";
 				reg = <0x4a084000 0x7c>;
-				ctrl-module = <&omap_control_usb2phy>;
+				syscon-phy-power = <&scm_conf 0x300>;
 				clocks = <&usb_phy_cm_clk32k>, <&usb_otg_ss_refclk960m>;
 				clock-names = "wkupclk", "refclk";
 				#phy-cells = <0>;
@@ -909,7 +897,7 @@
 				      <0x4a084800 0x64>,
 				      <0x4a084c00 0x40>;
 				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
-				ctrl-module = <&omap_control_usb3phy>;
+				syscon-phy-power = <&scm_conf 0x370>;
 				clocks = <&usb_phy_cm_clk32k>,
 					 <&sys_clkin>,
 					 <&usb_otg_ss_refclk960m>;
@@ -965,14 +953,6 @@
 			#thermal-sensor-cells = <1>;
 		};
 
-		omap_control_sata: control-phy@4a002374 {
-			compatible = "ti,control-phy-pipe3";
-			reg = <0x4a002374 0x4>;
-			reg-names = "power";
-			clocks = <&sys_clkin>;
-			clock-names = "sysclk";
-		};
-
 		/* OCP2SCP3 */
 		ocp2scp@4a090000 {
 			compatible = "ti,omap-ocp2scp";
@@ -987,7 +967,7 @@
 				      <0x4A096400 0x64>, /* phy_tx */
 				      <0x4A096800 0x40>; /* pll_ctrl */
 				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
-				ctrl-module = <&omap_control_sata>;
+				syscon-phy-power = <&scm_conf 0x374>;
 				clocks = <&sys_clkin>, <&sata_ref_clk>;
 				clock-names = "sysclk", "refclk";
 				#phy-cells = <0>;
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 6+ messages in thread

[parent not found: <1450689201-16973-1-git-send-email-kishon-l0cyMroinI0@public.gmane.org>]

* Re: [RESEND PATCH v4 0/4] ARM: dts: use syscon property instead of ctrl-module
       [not found] ` <1450689201-16973-1-git-send-email-kishon-l0cyMroinI0@public.gmane.org>
@ 2016-02-12 21:44   ` Tony Lindgren
  0 siblings, 0 replies; 6+ messages in thread
From: Tony Lindgren @ 2016-02-12 21:44 UTC (permalink / raw)
  To: Kishon Vijay Abraham I
  Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
	linux-omap-u79uwXL29TY76Z2rM5mHXA,
	bcousson-rdvid1DuHRBWk0Htik3J/w, linux-lFZ/pmaqli7XmaaqVzeoHQ,
	robh+dt-DgEjT+Ai2ygdnm+yROfE0A, pawel.moll-5wv7dgnIgG8,
	mark.rutland-5wv7dgnIgG8, ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
	galak-sgV2jX0FEOL9JmXXK+q4OQ, rogerq-l0cyMroinI0

* Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org> [151221 01:13]:
> This series is basically to deprecate using ctrl-module property and use
> corresponding syscon properties to program the control module registers.

Applying into omap-for-v4.6/dt finally, thanks!

Tony
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2016-02-12 21:44 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-12-21  9:13 [RESEND PATCH v4 0/4] ARM: dts: use syscon property instead of ctrl-module Kishon Vijay Abraham I
2015-12-21  9:13 ` [PATCH v4 1/4] ARM: dts: dra7: Add dt node for the sycon pcie Kishon Vijay Abraham I
2015-12-21  9:13 ` [PATCH v4 2/4] ARM: dts: dra7: Use "syscon-phy-power" and "syscon-pcs" in PCIe PHY node Kishon Vijay Abraham I
2015-12-21  9:13 ` [PATCH v4 3/4] ARM: dts: dra7: Use "ti, dra7x-usb2-phy2" compatible string for USB2 PHY2 Kishon Vijay Abraham I
2015-12-21  9:13 ` [PATCH v4 4/4] ARM: dts: <am4372/dra7/omap5>: Use "syscon-phy-power" instead of "ctrl-module" Kishon Vijay Abraham I
     [not found] ` <1450689201-16973-1-git-send-email-kishon-l0cyMroinI0@public.gmane.org>
2016-02-12 21:44   ` [RESEND PATCH v4 0/4] ARM: dts: use syscon property instead of ctrl-module Tony Lindgren

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).