Re: [PATCH v2 3/3] ARM: dts: Don't overheat the Odroid XU3-Lite on high load

[Viresh Kumar <viresh.kumar-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>]

On 18-02-16, 14:13, Krzysztof Kozlowski wrote:
> After adding cpufreq-dt support to Exynos542x, the Odroid XU3-Lite can
> be easily overheated when launching eight CPU-intensive tasks:
> 	thermal thermal_zone3: critical temperature reached(121 C),shutting down
> 
> This seems to be specific to Odroid XU3-Lite board which officially
> supports lower frequencies than regular XU3 or XU4. When working at
> maximum CPU speed (1800 MHz big and 1300 MHz LITTLE) in warmer place for
> longer time, the fan fails to cool down the board and it reaches
> critical temperature.
> 
> Add CPU cooling to Exynos5422/5800 to fix this issue. When reaching last
> interrupt-driven trip-point (70 degrees of Celsius) start passive
> cooling in polling mode (slowing CPU by 2 steps). When reaching 85
> degrees of Celsius, start slowing even more, down to 600 MHz.
> 
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
> 
> ---
> 
> Changes since v1:
> 1. Use polling mode for passive cooling (number of configurable trip
>    points in TMU exceeded).
> 
> 2. Adjust the values (temperature and cooling levels).
> ---
>  arch/arm/boot/dts/exynos5422-cpu-thermal.dtsi | 46 ++++++++++++++++++++++++++-
>  1 file changed, 45 insertions(+), 1 deletion(-)

Acked-by: Viresh Kumar <viresh.kumar-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>

-- 
viresh
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html