From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mauro Carvalho Chehab Subject: Re: [Patch v6 3/3] media: ti-vpe: Add CAL v4l2 camera capture driver Date: Fri, 19 Feb 2016 14:54:23 -0200 Message-ID: <20160219145423.49aaa0b9@recife.lan> References: <1452123446-5424-1-git-send-email-bparrot@ti.com> <1452123446-5424-4-git-send-email-bparrot@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1452123446-5424-4-git-send-email-bparrot@ti.com> Sender: linux-media-owner@vger.kernel.org To: Benoit Parrot Cc: Hans Verkuil , linux-media@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Hans Verkuil List-Id: devicetree@vger.kernel.org Em Wed, 6 Jan 2016 17:37:26 -0600 Benoit Parrot escreveu: > The Camera Adaptation Layer (CAL) is a block which consists of a dual > port CSI2/MIPI camera capture engine. > Port #0 can handle CSI2 camera connected to up to 4 data lanes. > Port #1 can handle CSI2 camera connected to up to 2 data lanes. > The driver implements the required API/ioctls to be V4L2 compliant. > Driver supports the following: > - V4L2 API using DMABUF/MMAP buffer access based on videobuf2 api > - Asynchronous sensor sub device registration > - DT support > > Signed-off-by: Benoit Parrot > Signed-off-by: Hans Verkuil > --- ... > +/* timeperframe is arbitrary and continuous */ > +static int cal_enum_frameintervals(struct file *file, void *priv, > + struct v4l2_frmivalenum *fival) > +{ > + struct cal_ctx *ctx = video_drvdata(file); > + const struct cal_fmt *fmt; > + struct v4l2_subdev_frame_size_enum fse; > + int ret; > + > + if (fival->index) > + return -EINVAL; > + > + fmt = find_format_by_pix(ctx, fival->pixel_format); > + if (!fmt) > + return -EINVAL; > + > + /* check for valid width/height */ > + ret = 0; > + fse.pad = 0; > + fse.code = fmt->code; > + fse.which = V4L2_SUBDEV_FORMAT_ACTIVE; > + for (fse.index = 0; ; fse.index++) { > + ret = v4l2_subdev_call(ctx->sensor, pad, enum_frame_size, > + NULL, &fse); > + if (ret) > + return -EINVAL; > + > + if ((fival->width == fse.max_width) && > + (fival->height == fse.max_height)) > + break; > + else if ((fival->width >= fse.min_width) && > + (fival->width <= fse.max_width) && > + (fival->height >= fse.min_height) && > + (fival->height <= fse.max_height)) > + break; > + > + return -EINVAL; > + } > + > + fival->type = V4L2_FRMIVAL_TYPE_DISCRETE; > + fival->discrete.numerator = 1; > + fival->discrete.denominator = 30; > + > + return 0; > +} The above routine is too complex and sounds wrong. Why do you need a loop there, if the loop will either return -EINVAL or be aborted the first time it runs? The way it is, it is just confusing and produces a smatch error: drivers/media/platform/ti-vpe/cal.c:1219 cal_enum_frameintervals() info: ignoring unreachable code. If all you want here is to run the loop once, this patch would do the same, with a clearer logic. ti-vpe/cal: Simplify the logic to avoid confusing smatch drivers/media/platform/ti-vpe/cal.c:1219 cal_enum_frameintervals() info: ignoring unreachable code. This is caused by a very confusing logic that looks like a loop, but it runs only once. Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/ti-vpe/cal.c b/drivers/media/platform/ti-vpe/cal.c index 35fa1071c5b2..62721ee7b9bc 100644 --- a/drivers/media/platform/ti-vpe/cal.c +++ b/drivers/media/platform/ti-vpe/cal.c @@ -1216,29 +1216,28 @@ static int cal_enum_frameintervals(struct file *file, void *priv, fse.pad = 0; fse.code = fmt->code; fse.which = V4L2_SUBDEV_FORMAT_ACTIVE; - for (fse.index = 0; ; fse.index++) { - ret = v4l2_subdev_call(ctx->sensor, pad, enum_frame_size, - NULL, &fse); - if (ret) - return -EINVAL; - - if ((fival->width == fse.max_width) && - (fival->height == fse.max_height)) - break; - else if ((fival->width >= fse.min_width) && - (fival->width <= fse.max_width) && - (fival->height >= fse.min_height) && - (fival->height <= fse.max_height)) - break; + fse.index = 0; + ret = v4l2_subdev_call(ctx->sensor, pad, enum_frame_size, + NULL, &fse); + if (ret) return -EINVAL; - } fival->type = V4L2_FRMIVAL_TYPE_DISCRETE; fival->discrete.numerator = 1; fival->discrete.denominator = 30; - return 0; + if ((fival->width == fse.max_width) && + (fival->height == fse.max_height)) + return 0; + + if ((fival->width >= fse.min_width) && + (fival->width <= fse.max_width) && + (fival->height >= fse.min_height) && + (fival->height <= fse.max_height)) + return 0; + + return -EINVAL; } /*