* [PATCH 0/4] Add support for Engicam IMX6UL module
@ 2016-02-20 10:20 Michael Trimarchi
[not found] ` <1455963652-24618-1-git-send-email-michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
0 siblings, 1 reply; 22+ messages in thread
From: Michael Trimarchi @ 2016-02-20 10:20 UTC (permalink / raw)
To: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
fabio.estevam-KZfg59tc24xl57MIdRCFDg,
computersforpeace-Re5JQEeQqe8AvxtiuMwx3w,
michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/
Thi patch series add the support for Engicam IMXUL product
https://community.freescale.com/docs/DOC-328428
Based on Freescale™ i.MX 6UltraLite processor, a high performance,
ultra-efficient processor family featuring an advanced implementation
of a single ARM™ Cortex™-A7 core, which operates at speeds up to 528 MHz.
The new ENGICAM GEA M6UL module is suitable for cost effective HMI
applications requiring high performance CPU.
Michael Trimarchi (4):
ARM: dts: imx6ul: Add flexcan1 and flexcan2 support
ARM: dts: imx6ul: Add LCDIF support
ARM: dts: imx6ul: Add GPMI nand controller support
ARM: dts: imx6ul-geam: Add Engicam IMX6UL GEA M6UL initial support
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/imx6ul-geam-kit.dts | 102 +++++++++
arch/arm/boot/dts/imx6ul-geam.dtsi | 371 +++++++++++++++++++++++++++++++++
arch/arm/boot/dts/imx6ul.dtsi | 68 ++++++
drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 10 +
drivers/mtd/nand/gpmi-nand/gpmi-nand.h | 6 +-
6 files changed, 557 insertions(+), 3 deletions(-)
create mode 100644 arch/arm/boot/dts/imx6ul-geam-kit.dts
create mode 100644 arch/arm/boot/dts/imx6ul-geam.dtsi
--
2.7.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 22+ messages in thread[parent not found: <1455963652-24618-1-git-send-email-michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>]
* [PATCH 1/4] ARM: dts: imx6ul: Add flexcan1 and flexcan2 support [not found] ` <1455963652-24618-1-git-send-email-michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> @ 2016-02-20 10:20 ` Michael Trimarchi [not found] ` <1455963652-24618-2-git-send-email-michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> 2016-02-20 10:20 ` [PATCH 2/4] ARM: dts: imx6ul: Add LCDIF support Michael Trimarchi ` (3 subsequent siblings) 4 siblings, 1 reply; 22+ messages in thread From: Michael Trimarchi @ 2016-02-20 10:20 UTC (permalink / raw) To: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree-u79uwXL29TY76Z2rM5mHXA, fabio.estevam-KZfg59tc24xl57MIdRCFDg, computersforpeace-Re5JQEeQqe8AvxtiuMwx3w, michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/ Add support for FLEXCAN1 and FLEXCAN2. Signed-off-by: Michael Trimarchi <michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> --- arch/arm/boot/dts/imx6ul.dtsi | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index 99b6465..cd32d1d 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -14,6 +14,8 @@ / { aliases { + can0 = &flexcan1; + can1 = &flexcan2; ethernet0 = &fec1; ethernet1 = &fec2; gpio0 = &gpio1; @@ -234,6 +236,28 @@ clock-names = "ipg", "per"; status = "disabled"; }; + + flexcan1: can@02090000 { + compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan"; + reg = <0x02090000 0x4000>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_CAN1_IPG>, + <&clks IMX6UL_CLK_CAN1_SERIAL>; + clock-names = "ipg", "per"; + stop-mode = <&gpr 0x10 1 0x10 17>; + status = "disabled"; + }; + + flexcan2: can@02094000 { + compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan"; + reg = <0x02094000 0x4000>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_CAN2_IPG>, + <&clks IMX6UL_CLK_CAN2_SERIAL>; + clock-names = "ipg", "per"; + stop-mode = <&gpr 0x10 2 0x10 18>; + status = "disabled"; + }; }; gpt1: gpt@02098000 { -- 2.7.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 22+ messages in thread
[parent not found: <1455963652-24618-2-git-send-email-michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>]
* Re: [PATCH 1/4] ARM: dts: imx6ul: Add flexcan1 and flexcan2 support [not found] ` <1455963652-24618-2-git-send-email-michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> @ 2016-02-20 14:02 ` Fabio Estevam [not found] ` <CAOMZO5Bk_ZMhYzFLRFNK2TQvK4KHuj62AM_6uF-m-P1kJupTHQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 0 siblings, 1 reply; 22+ messages in thread From: Fabio Estevam @ 2016-02-20 14:02 UTC (permalink / raw) To: Michael Trimarchi Cc: Shawn Guo, Sascha Hauer, Fabio Estevam, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Brian Norris, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org On Sat, Feb 20, 2016 at 8:20 AM, Michael Trimarchi <michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> wrote: > + > + flexcan1: can@02090000 { > + compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan"; > + reg = <0x02090000 0x4000>; > + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clks IMX6UL_CLK_CAN1_IPG>, > + <&clks IMX6UL_CLK_CAN1_SERIAL>; > + clock-names = "ipg", "per"; > + stop-mode = <&gpr 0x10 1 0x10 17>; This 'stop-mode' property is not handled in mainline, only in NXP kernel, so I suggest to drop this. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 22+ messages in thread
[parent not found: <CAOMZO5Bk_ZMhYzFLRFNK2TQvK4KHuj62AM_6uF-m-P1kJupTHQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>]
* Re: [PATCH 1/4] ARM: dts: imx6ul: Add flexcan1 and flexcan2 support [not found] ` <CAOMZO5Bk_ZMhYzFLRFNK2TQvK4KHuj62AM_6uF-m-P1kJupTHQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> @ 2016-02-20 17:18 ` Michael Trimarchi 2016-02-20 17:29 ` Fabio Estevam 0 siblings, 1 reply; 22+ messages in thread From: Michael Trimarchi @ 2016-02-20 17:18 UTC (permalink / raw) To: Fabio Estevam Cc: Shawn Guo, Sascha Hauer, Fabio Estevam, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Brian Norris, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org Hi Fabio On Sat, Feb 20, 2016 at 12:02:51PM -0200, Fabio Estevam wrote: > On Sat, Feb 20, 2016 at 8:20 AM, Michael Trimarchi > <michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> wrote: > > > + > > + flexcan1: can@02090000 { > > + compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan"; > > + reg = <0x02090000 0x4000>; > > + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&clks IMX6UL_CLK_CAN1_IPG>, > > + <&clks IMX6UL_CLK_CAN1_SERIAL>; > > + clock-names = "ipg", "per"; > > + stop-mode = <&gpr 0x10 1 0x10 17>; > > This 'stop-mode' property is not handled in mainline, only in NXP > kernel, so I suggest to drop this. ok. Can you point me out to a driver in freescale source that use it? Michael -- | Michael Nazzareno Trimarchi Amarula Solutions BV | | COO - Founder Cruquiuskade 47 | | +31(0)851119172 Amsterdam 1018 AM NL | | [`as] http://www.amarulasolutions.com | -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH 1/4] ARM: dts: imx6ul: Add flexcan1 and flexcan2 support 2016-02-20 17:18 ` Michael Trimarchi @ 2016-02-20 17:29 ` Fabio Estevam 2016-02-21 11:18 ` [PATCH V2 " Michael Trimarchi 0 siblings, 1 reply; 22+ messages in thread From: Fabio Estevam @ 2016-02-20 17:29 UTC (permalink / raw) To: Michael Trimarchi Cc: Shawn Guo, Sascha Hauer, Fabio Estevam, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Brian Norris, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org On Sat, Feb 20, 2016 at 3:18 PM, Michael Trimarchi <michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> wrote: > ok. Can you point me out to a driver in freescale source that use it? http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/tree/drivers/net/can/flexcan.c?h=imx_3.14.52_1.1.0_ga#n1146 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH V2 1/4] ARM: dts: imx6ul: Add flexcan1 and flexcan2 support 2016-02-20 17:29 ` Fabio Estevam @ 2016-02-21 11:18 ` Michael Trimarchi 0 siblings, 0 replies; 22+ messages in thread From: Michael Trimarchi @ 2016-02-21 11:18 UTC (permalink / raw) To: Fabio Estevam Cc: Fabio Estevam, devicetree@vger.kernel.org, Sascha Hauer, Brian Norris, Shawn Guo, linux-arm-kernel@lists.infradead.org Add support for FLEXCAN1 and FLEXCAN2. Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> --- Changes in V2: - remove stop-mode property because is not handle in mainline arch/arm/boot/dts/imx6ul.dtsi | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index 99b6465..f7b852e 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -14,6 +14,8 @@ / { aliases { + can0 = &flexcan1; + can1 = &flexcan2; ethernet0 = &fec1; ethernet1 = &fec2; gpio0 = &gpio1; @@ -234,6 +236,26 @@ clock-names = "ipg", "per"; status = "disabled"; }; + + flexcan1: can@02090000 { + compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan"; + reg = <0x02090000 0x4000>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_CAN1_IPG>, + <&clks IMX6UL_CLK_CAN1_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + flexcan2: can@02094000 { + compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan"; + reg = <0x02094000 0x4000>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_CAN2_IPG>, + <&clks IMX6UL_CLK_CAN2_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; }; gpt1: gpt@02098000 { -- 2.7.0 -- | Michael Nazzareno Trimarchi Amarula Solutions BV | | COO - Founder Cruquiuskade 47 | | +31(0)851119172 Amsterdam 1018 AM NL | | [`as] http://www.amarulasolutions.com | ^ permalink raw reply related [flat|nested] 22+ messages in thread
* [PATCH 2/4] ARM: dts: imx6ul: Add LCDIF support [not found] ` <1455963652-24618-1-git-send-email-michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> 2016-02-20 10:20 ` [PATCH 1/4] ARM: dts: imx6ul: Add flexcan1 and flexcan2 support Michael Trimarchi @ 2016-02-20 10:20 ` Michael Trimarchi 2016-02-20 10:20 ` [PATCH 3/4] ARM: dts: imx6ul: Add GPMI nand controller support Michael Trimarchi ` (2 subsequent siblings) 4 siblings, 0 replies; 22+ messages in thread From: Michael Trimarchi @ 2016-02-20 10:20 UTC (permalink / raw) To: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree-u79uwXL29TY76Z2rM5mHXA, fabio.estevam-KZfg59tc24xl57MIdRCFDg, computersforpeace-Re5JQEeQqe8AvxtiuMwx3w, michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/ Add support for LCDIF. Signed-off-by: Michael Trimarchi <michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> --- arch/arm/boot/dts/imx6ul.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index cd32d1d..f369fa4 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -696,6 +696,17 @@ reg = <0x021b0000 0x4000>; }; + lcdif: lcdif@021c8000 { + compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif"; + reg = <0x021c8000 0x4000>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_LCDIF_PIX>, + <&clks IMX6UL_CLK_LCDIF_APB>, + <&clks IMX6UL_CLK_DUMMY>; + clock-names = "pix", "axi", "disp_axi"; + status = "disabled"; + }; + qspi: qspi@021e0000 { #address-cells = <1>; #size-cells = <0>; -- 2.7.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 22+ messages in thread
* [PATCH 3/4] ARM: dts: imx6ul: Add GPMI nand controller support [not found] ` <1455963652-24618-1-git-send-email-michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> 2016-02-20 10:20 ` [PATCH 1/4] ARM: dts: imx6ul: Add flexcan1 and flexcan2 support Michael Trimarchi 2016-02-20 10:20 ` [PATCH 2/4] ARM: dts: imx6ul: Add LCDIF support Michael Trimarchi @ 2016-02-20 10:20 ` Michael Trimarchi [not found] ` <1455963652-24618-4-git-send-email-michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> 2016-02-20 10:20 ` [PATCH 4/4] ARM: dts: imx6ul-geam: Add Engicam IMX6UL GEA M6UL initial support Michael Trimarchi 2016-03-30 11:47 ` [PATCH 0/4] Add support for Engicam IMX6UL module Shawn Guo 4 siblings, 1 reply; 22+ messages in thread From: Michael Trimarchi @ 2016-02-20 10:20 UTC (permalink / raw) To: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree-u79uwXL29TY76Z2rM5mHXA, fabio.estevam-KZfg59tc24xl57MIdRCFDg, computersforpeace-Re5JQEeQqe8AvxtiuMwx3w, michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/ Add support for GPMI nand controller. Signed-off-by: Michael Trimarchi <michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> --- arch/arm/boot/dts/imx6ul.dtsi | 33 +++++++++++++++++++++++++++++++++ drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 10 ++++++++++ drivers/mtd/nand/gpmi-nand/gpmi-nand.h | 6 ++++-- 3 files changed, 47 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index f369fa4..42b0a29 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -142,6 +142,39 @@ reg = <0x00900000 0x20000>; }; + dma_apbh: dma-apbh@01804000 { + compatible = "fsl,imx6ul-dma-apbh", "fsl,imx28-dma-apbh"; + reg = <0x01804000 0x2000>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3"; + #dma-cells = <1>; + dma-channels = <4>; + clocks = <&clks IMX6UL_CLK_APBHDMA>; + }; + + gpmi: gpmi-nand@01806000 { + compatible = "fsl,imx6ul-gpmi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x01806000 0x2000>, <0x01808000 0x4000>; + reg-names = "gpmi-nand", "bch"; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "bch"; + clocks = <&clks IMX6UL_CLK_GPMI_IO>, + <&clks IMX6UL_CLK_GPMI_APB>, + <&clks IMX6UL_CLK_GPMI_BCH>, + <&clks IMX6UL_CLK_GPMI_BCH_APB>, + <&clks IMX6UL_CLK_PER_BCH>; + clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch", + "gpmi_bch_apb", "per1_bch"; + dmas = <&dma_apbh 0>; + dma-names = "rx-tx"; + status = "disabled"; + }; + aips1: aips-bus@02000000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c index 235ddcb..b7528a1 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c @@ -77,6 +77,12 @@ static const struct gpmi_devdata gpmi_devdata_imx6sx = { .max_chain_delay = 12, }; +static const struct gpmi_devdata gpmi_devdata_imx6ul = { + .type = IS_MX6UL, + .bch_max_ecc_strength = 40, + .max_chain_delay = 12, +}; + static irqreturn_t bch_irq(int irq, void *cookie) { struct gpmi_nand_data *this = cookie; @@ -1975,7 +1981,11 @@ static const struct of_device_id gpmi_nand_id_table[] = { }, { .compatible = "fsl,imx6sx-gpmi-nand", .data = &gpmi_devdata_imx6sx, + }, { + .compatible = "fsl,imx6ul-gpmi-nand", + .data = &gpmi_devdata_imx6ul, }, {} + }; MODULE_DEVICE_TABLE(of, gpmi_nand_id_table); diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h index 4e49a1f..c5fa52a 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h @@ -123,7 +123,8 @@ enum gpmi_type { IS_MX23, IS_MX28, IS_MX6Q, - IS_MX6SX + IS_MX6SX, + IS_MX6UL, }; struct gpmi_devdata { @@ -305,6 +306,7 @@ void gpmi_copy_bits(u8 *dst, size_t dst_bit_off, #define GPMI_IS_MX28(x) ((x)->devdata->type == IS_MX28) #define GPMI_IS_MX6Q(x) ((x)->devdata->type == IS_MX6Q) #define GPMI_IS_MX6SX(x) ((x)->devdata->type == IS_MX6SX) +#define GPMI_IS_MX6UL(x) ((x)->devdata->type == IS_MX6UL) -#define GPMI_IS_MX6(x) (GPMI_IS_MX6Q(x) || GPMI_IS_MX6SX(x)) +#define GPMI_IS_MX6(x) (GPMI_IS_MX6Q(x) || GPMI_IS_MX6SX(x) || GPMI_IS_MX6UL(x)) #endif -- 2.7.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 22+ messages in thread
[parent not found: <1455963652-24618-4-git-send-email-michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>]
* Re: [PATCH 3/4] ARM: dts: imx6ul: Add GPMI nand controller support [not found] ` <1455963652-24618-4-git-send-email-michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> @ 2016-02-20 11:57 ` Fabio Estevam [not found] ` <CAOMZO5DTmG7Umt+H20r+tZi9zZhsK=eoPbHOBO3iwvM2GXXLgg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 0 siblings, 1 reply; 22+ messages in thread From: Fabio Estevam @ 2016-02-20 11:57 UTC (permalink / raw) To: Michael Trimarchi Cc: Shawn Guo, Sascha Hauer, Fabio Estevam, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Brian Norris, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org Hi Michael, On Sat, Feb 20, 2016 at 8:20 AM, Michael Trimarchi <michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> wrote: > Add support for GPMI nand controller. > > Signed-off-by: Michael Trimarchi <michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> > --- > arch/arm/boot/dts/imx6ul.dtsi | 33 +++++++++++++++++++++++++++++++++ > drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 10 ++++++++++ > drivers/mtd/nand/gpmi-nand/gpmi-nand.h | 6 ++++-- It would be better to split the dts and mtd parts in two patches. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 22+ messages in thread
[parent not found: <CAOMZO5DTmG7Umt+H20r+tZi9zZhsK=eoPbHOBO3iwvM2GXXLgg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>]
* Re: [PATCH 3/4] ARM: dts: imx6ul: Add GPMI nand controller support [not found] ` <CAOMZO5DTmG7Umt+H20r+tZi9zZhsK=eoPbHOBO3iwvM2GXXLgg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> @ 2016-02-20 17:21 ` Michael Trimarchi 2016-02-21 11:29 ` [PATCH V2 " Michael Trimarchi 0 siblings, 1 reply; 22+ messages in thread From: Michael Trimarchi @ 2016-02-20 17:21 UTC (permalink / raw) To: Fabio Estevam Cc: Shawn Guo, Sascha Hauer, Fabio Estevam, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Brian Norris, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org Hi On Sat, Feb 20, 2016 at 09:57:27AM -0200, Fabio Estevam wrote: > Hi Michael, > > On Sat, Feb 20, 2016 at 8:20 AM, Michael Trimarchi > <michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> wrote: > > Add support for GPMI nand controller. > > > > Signed-off-by: Michael Trimarchi <michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> > > --- > > arch/arm/boot/dts/imx6ul.dtsi | 33 +++++++++++++++++++++++++++++++++ > > drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 10 ++++++++++ > > drivers/mtd/nand/gpmi-nand/gpmi-nand.h | 6 ++++-- > > It would be better to split the dts and mtd parts in two patches. I'm thinking even to drop the IS_TYPE for the IMX6QUL. Does it make sense to have or let compatible to the one that is already defined? Michael -- | Michael Nazzareno Trimarchi Amarula Solutions BV | | COO - Founder Cruquiuskade 47 | | +31(0)851119172 Amsterdam 1018 AM NL | | [`as] http://www.amarulasolutions.com | -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH V2 3/4] ARM: dts: imx6ul: Add GPMI nand controller support 2016-02-20 17:21 ` Michael Trimarchi @ 2016-02-21 11:29 ` Michael Trimarchi 2016-02-22 8:26 ` Lothar Waßmann 0 siblings, 1 reply; 22+ messages in thread From: Michael Trimarchi @ 2016-02-21 11:29 UTC (permalink / raw) To: Fabio Estevam Cc: Fabio Estevam, devicetree@vger.kernel.org, Sascha Hauer, Brian Norris, Shawn Guo, linux-arm-kernel@lists.infradead.org Add support for GPMI nand controller. Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> --- Changes V2: - drop special IMXUL type because seems that is compatible with IMX6Q arch/arm/boot/dts/imx6ul.dtsi | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index f4daf97..1a486ac 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -142,6 +142,39 @@ reg = <0x00900000 0x20000>; }; + dma_apbh: dma-apbh@01804000 { + compatible = "fsl,imx6ul-dma-apbh", "fsl,imx28-dma-apbh"; + reg = <0x01804000 0x2000>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3"; + #dma-cells = <1>; + dma-channels = <4>; + clocks = <&clks IMX6UL_CLK_APBHDMA>; + }; + + gpmi: gpmi-nand@01806000 { + compatible = "fsl,imx6q-gpmi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x01806000 0x2000>, <0x01808000 0x4000>; + reg-names = "gpmi-nand", "bch"; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "bch"; + clocks = <&clks IMX6UL_CLK_GPMI_IO>, + <&clks IMX6UL_CLK_GPMI_APB>, + <&clks IMX6UL_CLK_GPMI_BCH>, + <&clks IMX6UL_CLK_GPMI_BCH_APB>, + <&clks IMX6UL_CLK_PER_BCH>; + clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch", + "gpmi_bch_apb", "per1_bch"; + dmas = <&dma_apbh 0>; + dma-names = "rx-tx"; + status = "disabled"; + }; + aips1: aips-bus@02000000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; -- 2.7.0 -- | Michael Nazzareno Trimarchi Amarula Solutions BV | | COO - Founder Cruquiuskade 47 | | +31(0)851119172 Amsterdam 1018 AM NL | | [`as] http://www.amarulasolutions.com | ^ permalink raw reply related [flat|nested] 22+ messages in thread
* Re: [PATCH V2 3/4] ARM: dts: imx6ul: Add GPMI nand controller support 2016-02-21 11:29 ` [PATCH V2 " Michael Trimarchi @ 2016-02-22 8:26 ` Lothar Waßmann [not found] ` <20160222092613.3c32a4a0-VjFSrY7JcPWvSplVBqRQBQ@public.gmane.org> 0 siblings, 1 reply; 22+ messages in thread From: Lothar Waßmann @ 2016-02-22 8:26 UTC (permalink / raw) To: Michael Trimarchi Cc: Fabio Estevam, Fabio Estevam, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Sascha Hauer, Brian Norris, Shawn Guo, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org Hi, On Sun, 21 Feb 2016 12:29:53 +0100 Michael Trimarchi wrote: > Add support for GPMI nand controller. > > Signed-off-by: Michael Trimarchi <michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> > --- > Changes V2: > - drop special IMXUL type because seems that is compatible > with IMX6Q > > arch/arm/boot/dts/imx6ul.dtsi | 33 +++++++++++++++++++++++++++++++++ > 1 file changed, 33 insertions(+) > > diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi > index f4daf97..1a486ac 100644 > --- a/arch/arm/boot/dts/imx6ul.dtsi > +++ b/arch/arm/boot/dts/imx6ul.dtsi > @@ -142,6 +142,39 @@ > reg = <0x00900000 0x20000>; > }; > > + dma_apbh: dma-apbh@01804000 { > + compatible = "fsl,imx6ul-dma-apbh", "fsl,imx28-dma-apbh"; > + reg = <0x01804000 0x2000>; > + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3"; > + #dma-cells = <1>; > + dma-channels = <4>; > + clocks = <&clks IMX6UL_CLK_APBHDMA>; > + }; > + > + gpmi: gpmi-nand@01806000 { > + compatible = "fsl,imx6q-gpmi-nand"; > You should still add an imx6ul specific compatible (likewise to the dma_apbh). Lothar Waßmann -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 22+ messages in thread
[parent not found: <20160222092613.3c32a4a0-VjFSrY7JcPWvSplVBqRQBQ@public.gmane.org>]
* Re: [PATCH V2 3/4] ARM: dts: imx6ul: Add GPMI nand controller support [not found] ` <20160222092613.3c32a4a0-VjFSrY7JcPWvSplVBqRQBQ@public.gmane.org> @ 2016-03-20 8:44 ` Michael Trimarchi [not found] ` <CAOf5uwkn6k1YfMkMMSksKjakpP-NXsU0G9x0dyBao7n7NXSYug-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 0 siblings, 1 reply; 22+ messages in thread From: Michael Trimarchi @ 2016-03-20 8:44 UTC (permalink / raw) To: Lothar Waßmann Cc: Fabio Estevam, Fabio Estevam, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Sascha Hauer, Brian Norris, Shawn Guo, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org Hi Lothar On Mon, Feb 22, 2016 at 9:26 AM, Lothar Waßmann <LW@karo-electronics.de> wrote: > Hi, > > On Sun, 21 Feb 2016 12:29:53 +0100 Michael Trimarchi wrote: >> Add support for GPMI nand controller. >> >> Signed-off-by: Michael Trimarchi <michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> >> --- >> Changes V2: >> - drop special IMXUL type because seems that is compatible >> with IMX6Q >> >> arch/arm/boot/dts/imx6ul.dtsi | 33 +++++++++++++++++++++++++++++++++ >> 1 file changed, 33 insertions(+) >> >> diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi >> index f4daf97..1a486ac 100644 >> --- a/arch/arm/boot/dts/imx6ul.dtsi >> +++ b/arch/arm/boot/dts/imx6ul.dtsi >> @@ -142,6 +142,39 @@ >> reg = <0x00900000 0x20000>; >> }; >> >> + dma_apbh: dma-apbh@01804000 { >> + compatible = "fsl,imx6ul-dma-apbh", "fsl,imx28-dma-apbh"; >> + reg = <0x01804000 0x2000>; >> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, >> + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, >> + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, >> + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; >> + interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3"; >> + #dma-cells = <1>; >> + dma-channels = <4>; >> + clocks = <&clks IMX6UL_CLK_APBHDMA>; >> + }; >> + >> + gpmi: gpmi-nand@01806000 { >> + compatible = "fsl,imx6q-gpmi-nand"; >> > You should still add an imx6ul specific compatible (likewise to the > dma_apbh). > I understand your point but this seems that imx6q and imx6sx are defined in the same way Michael > > > Lothar Waßmann -- | Michael Nazzareno Trimarchi Amarula Solutions BV | | COO - Founder Cruquiuskade 47 | | +31(0)851119172 Amsterdam 1018 AM NL | | [`as] http://www.amarulasolutions.com | -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 22+ messages in thread
[parent not found: <CAOf5uwkn6k1YfMkMMSksKjakpP-NXsU0G9x0dyBao7n7NXSYug-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>]
* Re: [PATCH V2 3/4] ARM: dts: imx6ul: Add GPMI nand controller support [not found] ` <CAOf5uwkn6k1YfMkMMSksKjakpP-NXsU0G9x0dyBao7n7NXSYug-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> @ 2016-03-21 9:47 ` Lothar Waßmann [not found] ` <20160321104718.05834ffa-VjFSrY7JcPWvSplVBqRQBQ@public.gmane.org> 0 siblings, 1 reply; 22+ messages in thread From: Lothar Waßmann @ 2016-03-21 9:47 UTC (permalink / raw) To: Michael Trimarchi Cc: Fabio Estevam, Fabio Estevam, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Sascha Hauer, Brian Norris, Shawn Guo, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org Hi, On Sun, 20 Mar 2016 09:44:19 +0100 Michael Trimarchi wrote: > Hi Lothar > > On Mon, Feb 22, 2016 at 9:26 AM, Lothar Waßmann <LW@karo-electronics.de> wrote: > > Hi, > > > > On Sun, 21 Feb 2016 12:29:53 +0100 Michael Trimarchi wrote: > >> Add support for GPMI nand controller. > >> > >> Signed-off-by: Michael Trimarchi <michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> > >> --- > >> Changes V2: > >> - drop special IMXUL type because seems that is compatible > >> with IMX6Q > >> > >> arch/arm/boot/dts/imx6ul.dtsi | 33 +++++++++++++++++++++++++++++++++ > >> 1 file changed, 33 insertions(+) > >> > >> diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi > >> index f4daf97..1a486ac 100644 > >> --- a/arch/arm/boot/dts/imx6ul.dtsi > >> +++ b/arch/arm/boot/dts/imx6ul.dtsi > >> @@ -142,6 +142,39 @@ > >> reg = <0x00900000 0x20000>; > >> }; > >> > >> + dma_apbh: dma-apbh@01804000 { > >> + compatible = "fsl,imx6ul-dma-apbh", "fsl,imx28-dma-apbh"; > >> + reg = <0x01804000 0x2000>; > >> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, > >> + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, > >> + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, > >> + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; > >> + interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3"; > >> + #dma-cells = <1>; > >> + dma-channels = <4>; > >> + clocks = <&clks IMX6UL_CLK_APBHDMA>; > >> + }; > >> + > >> + gpmi: gpmi-nand@01806000 { > >> + compatible = "fsl,imx6q-gpmi-nand"; > >> > > You should still add an imx6ul specific compatible (likewise to the > > dma_apbh). > > > > I understand your point but this seems that imx6q and imx6sx are > defined in the same way > That doesn't mean they are correct. I got the same comment from Lucas Stach in <1452678036.3694.51.camel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org> Lothar Waßmann -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 22+ messages in thread
[parent not found: <20160321104718.05834ffa-VjFSrY7JcPWvSplVBqRQBQ@public.gmane.org>]
* Re: [PATCH V2 3/4] ARM: dts: imx6ul: Add GPMI nand controller support [not found] ` <20160321104718.05834ffa-VjFSrY7JcPWvSplVBqRQBQ@public.gmane.org> @ 2016-03-22 7:44 ` Michael Trimarchi 0 siblings, 0 replies; 22+ messages in thread From: Michael Trimarchi @ 2016-03-22 7:44 UTC (permalink / raw) To: Lothar Waßmann Cc: Fabio Estevam, Fabio Estevam, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Sascha Hauer, Brian Norris, Shawn Guo, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org Hi On Mon, Mar 21, 2016 at 10:47 AM, Lothar Waßmann <LW@karo-electronics.de> wrote: > Hi, > > On Sun, 20 Mar 2016 09:44:19 +0100 Michael Trimarchi wrote: >> Hi Lothar >> >> On Mon, Feb 22, 2016 at 9:26 AM, Lothar Waßmann <LW@karo-electronics.de> wrote: >> > Hi, >> > >> > On Sun, 21 Feb 2016 12:29:53 +0100 Michael Trimarchi wrote: >> >> Add support for GPMI nand controller. >> >> >> >> Signed-off-by: Michael Trimarchi <michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> >> >> --- >> >> Changes V2: >> >> - drop special IMXUL type because seems that is compatible >> >> with IMX6Q >> >> >> >> arch/arm/boot/dts/imx6ul.dtsi | 33 +++++++++++++++++++++++++++++++++ >> >> 1 file changed, 33 insertions(+) >> >> >> >> diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi >> >> index f4daf97..1a486ac 100644 >> >> --- a/arch/arm/boot/dts/imx6ul.dtsi >> >> +++ b/arch/arm/boot/dts/imx6ul.dtsi >> >> @@ -142,6 +142,39 @@ >> >> reg = <0x00900000 0x20000>; >> >> }; >> >> >> >> + dma_apbh: dma-apbh@01804000 { >> >> + compatible = "fsl,imx6ul-dma-apbh", "fsl,imx28-dma-apbh"; >> >> + reg = <0x01804000 0x2000>; >> >> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, >> >> + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, >> >> + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, >> >> + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; >> >> + interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3"; >> >> + #dma-cells = <1>; >> >> + dma-channels = <4>; >> >> + clocks = <&clks IMX6UL_CLK_APBHDMA>; >> >> + }; >> >> + >> >> + gpmi: gpmi-nand@01806000 { >> >> + compatible = "fsl,imx6q-gpmi-nand"; >> >> >> > You should still add an imx6ul specific compatible (likewise to the >> > dma_apbh). >> > >> >> I understand your point but this seems that imx6q and imx6sx are >> defined in the same way >> > That doesn't mean they are correct. I got the same comment from Lucas > Stach in <1452678036.3694.51.camel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org> > Ok, it's fine. I will fix it and re-post the series Michael > > Lothar Waßmann -- | Michael Nazzareno Trimarchi Amarula Solutions BV | | COO - Founder Cruquiuskade 47 | | +31(0)851119172 Amsterdam 1018 AM NL | | [`as] http://www.amarulasolutions.com | -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 4/4] ARM: dts: imx6ul-geam: Add Engicam IMX6UL GEA M6UL initial support [not found] ` <1455963652-24618-1-git-send-email-michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> ` (2 preceding siblings ...) 2016-02-20 10:20 ` [PATCH 3/4] ARM: dts: imx6ul: Add GPMI nand controller support Michael Trimarchi @ 2016-02-20 10:20 ` Michael Trimarchi [not found] ` <1455963652-24618-5-git-send-email-michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> 2016-03-30 11:47 ` [PATCH 0/4] Add support for Engicam IMX6UL module Shawn Guo 4 siblings, 1 reply; 22+ messages in thread From: Michael Trimarchi @ 2016-02-20 10:20 UTC (permalink / raw) To: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree-u79uwXL29TY76Z2rM5mHXA, fabio.estevam-KZfg59tc24xl57MIdRCFDg, computersforpeace-Re5JQEeQqe8AvxtiuMwx3w, michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/ http://www.engicam.com/prodotti/embedded/som/sodimm/gea-m6ul Signed-off-by: Michael Trimarchi <michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> --- arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/imx6ul-geam-kit.dts | 102 ++++++++++ arch/arm/boot/dts/imx6ul-geam.dtsi | 371 ++++++++++++++++++++++++++++++++++ 3 files changed, 475 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/imx6ul-geam-kit.dts create mode 100644 arch/arm/boot/dts/imx6ul-geam.dtsi diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index a4a6d70..4f6965a 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -358,7 +358,8 @@ dtb-$(CONFIG_SOC_IMX6SX) += \ imx6sx-sdb-reva.dtb \ imx6sx-sdb.dtb dtb-$(CONFIG_SOC_IMX6UL) += \ - imx6ul-14x14-evk.dtb + imx6ul-14x14-evk.dtb \ + imx6ul-geam-kit.dtb dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-cl-som-imx7.dtb \ imx7d-sbc-imx7.dtb \ diff --git a/arch/arm/boot/dts/imx6ul-geam-kit.dts b/arch/arm/boot/dts/imx6ul-geam-kit.dts new file mode 100644 index 0000000..9ba4a66 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-geam-kit.dts @@ -0,0 +1,102 @@ +/* + * Copyright (C) 2016 Amarula Solutions B.V. + * Copyright (C) 2016 Engicam S.r.l. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include "imx6ul-geam.dtsi" + +/ { + model = "Engicam GEAM6UL"; + compatible = "engicam,imx6ul-geam", "fsl,imx6ul"; +}; + +&flexcan1 { + status = "okay"; +}; + +&flexcan2 { + status = "okay"; +}; + +&lcdif { + display = <&display0>; + status = "okay"; + + display0: display { + bits-per-pixel = <16>; + bus-width = <18>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <28000000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <30>; + hback-porch = <30>; + hsync-len = <64>; + vback-porch = <5>; + vfront-porch = <5>; + vsync-len = <20>; + + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + status = "okay"; +}; + +&tsc { + measure_delay_time = <0x1ffff>; + pre_charge_time = <0x1fff>; + status = "okay"; +}; + diff --git a/arch/arm/boot/dts/imx6ul-geam.dtsi b/arch/arm/boot/dts/imx6ul-geam.dtsi new file mode 100644 index 0000000..738f420 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-geam.dtsi @@ -0,0 +1,371 @@ +/* + * Copyright (C) 2016 Amarula Solutions B.V. + * Copyright (C) 2016 Engicam S.r.l. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "imx6ul.dtsi" + +/ { + memory { + reg = <0x80000000 0x20000000>; + }; + + chosen { + stdout-path = &uart1; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_3p3v>; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_3p3v>; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rmii"; + phy-handle = <ðphy0>; + status = "okay"; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>; + phy-mode = "rmii"; + phy-handle = <ðphy1>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; + }; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + status = "okay"; + nand-on-flash-bbt; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif_dat + &pinctrl_lcdif_ctrl>; + display = <&display0>; +}; + +&tsc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tsc>; + xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + bus-width = <4>; + cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + no-1-8-v; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&i2c2 { + clock_frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&iomuxc { + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031 + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0 + MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15 0x1b0b0 /* ENET_nRST */ + MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0 + MX6UL_PAD_GPIO1_IO05__ENET2_REF_CLK2 0x4001b031 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020 + MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020 + >; + }; + + pinctrl_flexcan2: flexcan2grp{ + fsl,pins = < + MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020 + MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020 + >; + }; + + pinctrl_gpmi_nand: gpmi-nand { + fsl,pins = < + MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1 + MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1 + MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0xb0b1 + MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb000 + MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0xb0b1 + MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0xb0b1 + MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0xb0b1 + MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0xb0b1 + MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0xb0b1 + MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0xb0b1 + MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0xb0b1 + MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0xb0b1 + MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0xb0b1 + MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0xb0b1 + MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0xb0b1 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 + MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0 + MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0 + >; + }; + + pinctrl_lcdif_ctrl: lcdifctrlgrp { + fsl,pins = < + MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79 + MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79 + MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79 + MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79 + >; + }; + + pinctrl_lcdif_dat: lcdifdatgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79 + MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79 + MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79 + MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79 + MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79 + MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79 + MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79 + MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79 + MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79 + MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79 + MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79 + MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79 + MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79 + MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79 + MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79 + MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79 + MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79 + MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1 + MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1 + MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS 0x1b0b1 + MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS 0x1b0b1 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x17070 + MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x10070 + MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x17070 + MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x17070 + MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x17070 + MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x17070 + >; + }; + + pinctrl_spi4: spi4grp { + fsl,pins = < + MX6UL_PAD_BOOT_MODE0__GPIO5_IO10 0x70a1 + MX6UL_PAD_BOOT_MODE1__GPIO5_IO11 0x70a1 + MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x70a1 + MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x80000000 + >; + }; + + pinctrl_tsc: tscgrp { + fsl,pin = < + MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0 + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0 + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 + MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0 + >; + }; +}; -- 2.7.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 22+ messages in thread
[parent not found: <1455963652-24618-5-git-send-email-michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>]
* Re: [PATCH 4/4] ARM: dts: imx6ul-geam: Add Engicam IMX6UL GEA M6UL initial support [not found] ` <1455963652-24618-5-git-send-email-michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> @ 2016-02-20 14:11 ` Fabio Estevam [not found] ` <CAOMZO5AmePs3aE2zRSXcSS8iKQ0m2kvTAezsfHS13e-Zv1HCrA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 0 siblings, 1 reply; 22+ messages in thread From: Fabio Estevam @ 2016-02-20 14:11 UTC (permalink / raw) To: Michael Trimarchi Cc: Shawn Guo, Sascha Hauer, Fabio Estevam, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Brian Norris, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org On Sat, Feb 20, 2016 at 8:20 AM, Michael Trimarchi <michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> wrote: > + reg_1p8v: regulator-1p8v { > + compatible = "regulator-fixed"; > + regulator-name = "1P8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-boot-on; > + regulator-always-on; These last two properties can be removed. > + }; > + > + reg_3p3v: regulator-3p3v { > + compatible = "regulator-fixed"; > + regulator-name = "3P3V"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; Ditto. > + pinctrl_spi4: spi4grp { > + fsl,pins = < > + MX6UL_PAD_BOOT_MODE0__GPIO5_IO10 0x70a1 > + MX6UL_PAD_BOOT_MODE1__GPIO5_IO11 0x70a1 > + MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x70a1 > + MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x80000000 > + >; > + }; pinctrl_spi4 seems to be unused. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 22+ messages in thread
[parent not found: <CAOMZO5AmePs3aE2zRSXcSS8iKQ0m2kvTAezsfHS13e-Zv1HCrA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>]
* Re: [PATCH 4/4] ARM: dts: imx6ul-geam: Add Engicam IMX6UL GEA M6UL initial support [not found] ` <CAOMZO5AmePs3aE2zRSXcSS8iKQ0m2kvTAezsfHS13e-Zv1HCrA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> @ 2016-02-20 17:19 ` Michael Trimarchi 2016-02-20 17:30 ` Fabio Estevam 0 siblings, 1 reply; 22+ messages in thread From: Michael Trimarchi @ 2016-02-20 17:19 UTC (permalink / raw) To: Fabio Estevam Cc: Shawn Guo, Sascha Hauer, Fabio Estevam, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Brian Norris, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org Hi Fabio On Sat, Feb 20, 2016 at 12:11:14PM -0200, Fabio Estevam wrote: > On Sat, Feb 20, 2016 at 8:20 AM, Michael Trimarchi > <michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> wrote: > > > + reg_1p8v: regulator-1p8v { > > + compatible = "regulator-fixed"; > > + regulator-name = "1P8V"; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <1800000>; > > + regulator-boot-on; > > + regulator-always-on; > > These last two properties can be removed. > This map the phy connection. Regulator are really always on and they are always on Michael > > + }; > > + > > + reg_3p3v: regulator-3p3v { > > + compatible = "regulator-fixed"; > > + regulator-name = "3P3V"; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-boot-on; > > + regulator-always-on; > > Ditto. > > > + pinctrl_spi4: spi4grp { > > + fsl,pins = < > > + MX6UL_PAD_BOOT_MODE0__GPIO5_IO10 0x70a1 > > + MX6UL_PAD_BOOT_MODE1__GPIO5_IO11 0x70a1 > > + MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x70a1 > > + MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x80000000 > > + >; > > + }; > > pinctrl_spi4 seems to be unused. -- | Michael Nazzareno Trimarchi Amarula Solutions BV | | COO - Founder Cruquiuskade 47 | | +31(0)851119172 Amsterdam 1018 AM NL | | [`as] http://www.amarulasolutions.com | -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH 4/4] ARM: dts: imx6ul-geam: Add Engicam IMX6UL GEA M6UL initial support 2016-02-20 17:19 ` Michael Trimarchi @ 2016-02-20 17:30 ` Fabio Estevam 2016-02-21 15:32 ` [PATCH V2 " Michael Trimarchi 0 siblings, 1 reply; 22+ messages in thread From: Fabio Estevam @ 2016-02-20 17:30 UTC (permalink / raw) To: Michael Trimarchi Cc: Shawn Guo, Sascha Hauer, Fabio Estevam, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Brian Norris, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org On Sat, Feb 20, 2016 at 3:19 PM, Michael Trimarchi <michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> wrote: > This map the phy connection. Regulator are really always on and they > are always on but they are pointless with this type of regulator. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH V2 4/4] ARM: dts: imx6ul-geam: Add Engicam IMX6UL GEA M6UL initial support 2016-02-20 17:30 ` Fabio Estevam @ 2016-02-21 15:32 ` Michael Trimarchi 0 siblings, 0 replies; 22+ messages in thread From: Michael Trimarchi @ 2016-02-21 15:32 UTC (permalink / raw) To: Fabio Estevam Cc: Fabio Estevam, devicetree@vger.kernel.org, Sascha Hauer, Brian Norris, Shawn Guo, linux-arm-kernel@lists.infradead.org http://www.engicam.com/prodotti/embedded/som/sodimm/gea-m6ul Signed-off-by: Matteo Lisi <matteo.lisi@engicam.com> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> --- Changes V2: - remove not used muxed - sort better regulator but not remove "silly" one propertes for now - small issue on code style - add Matteo from Engicam that help me to test and verify the board, provide hw support arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/imx6ul-geam-kit.dts | 102 ++++++++++ arch/arm/boot/dts/imx6ul-geam.dtsi | 362 ++++++++++++++++++++++++++++++++++ 3 files changed, 466 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/imx6ul-geam-kit.dts create mode 100644 arch/arm/boot/dts/imx6ul-geam.dtsi diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index a4a6d70..4f6965a 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -358,7 +358,8 @@ dtb-$(CONFIG_SOC_IMX6SX) += \ imx6sx-sdb-reva.dtb \ imx6sx-sdb.dtb dtb-$(CONFIG_SOC_IMX6UL) += \ - imx6ul-14x14-evk.dtb + imx6ul-14x14-evk.dtb \ + imx6ul-geam-kit.dtb dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-cl-som-imx7.dtb \ imx7d-sbc-imx7.dtb \ diff --git a/arch/arm/boot/dts/imx6ul-geam-kit.dts b/arch/arm/boot/dts/imx6ul-geam-kit.dts new file mode 100644 index 0000000..9ba4a66 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-geam-kit.dts @@ -0,0 +1,102 @@ +/* + * Copyright (C) 2016 Amarula Solutions B.V. + * Copyright (C) 2016 Engicam S.r.l. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include "imx6ul-geam.dtsi" + +/ { + model = "Engicam GEAM6UL"; + compatible = "engicam,imx6ul-geam", "fsl,imx6ul"; +}; + +&flexcan1 { + status = "okay"; +}; + +&flexcan2 { + status = "okay"; +}; + +&lcdif { + display = <&display0>; + status = "okay"; + + display0: display { + bits-per-pixel = <16>; + bus-width = <18>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <28000000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <30>; + hback-porch = <30>; + hsync-len = <64>; + vback-porch = <5>; + vfront-porch = <5>; + vsync-len = <20>; + + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + status = "okay"; +}; + +&tsc { + measure_delay_time = <0x1ffff>; + pre_charge_time = <0x1fff>; + status = "okay"; +}; + diff --git a/arch/arm/boot/dts/imx6ul-geam.dtsi b/arch/arm/boot/dts/imx6ul-geam.dtsi new file mode 100644 index 0000000..914c0b1 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-geam.dtsi @@ -0,0 +1,362 @@ +/* + * Copyright (C) 2016 Amarula Solutions B.V. + * Copyright (C) 2016 Engicam S.r.l. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "imx6ul.dtsi" + +/ { + memory { + reg = <0x80000000 0x20000000>; + }; + + chosen { + stdout-path = &uart1; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_3p3v>; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_3p3v>; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rmii"; + phy-handle = <ðphy0>; + status = "okay"; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>; + phy-mode = "rmii"; + phy-handle = <ðphy1>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; + }; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + status = "okay"; + nand-on-flash-bbt; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif_dat + &pinctrl_lcdif_ctrl>; + display = <&display0>; +}; + +&tsc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tsc>; + xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + bus-width = <4>; + cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + no-1-8-v; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&i2c2 { + clock_frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&iomuxc { + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031 + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0 + MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15 0x1b0b0 /* ENET_nRST */ + MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0 + MX6UL_PAD_GPIO1_IO05__ENET2_REF_CLK2 0x4001b031 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020 + MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020 + MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020 + >; + }; + + pinctrl_gpmi_nand: gpmi-nand { + fsl,pins = < + MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1 + MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1 + MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0xb0b1 + MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb000 + MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0xb0b1 + MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0xb0b1 + MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0xb0b1 + MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0xb0b1 + MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0xb0b1 + MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0xb0b1 + MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0xb0b1 + MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0xb0b1 + MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0xb0b1 + MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0xb0b1 + MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0xb0b1 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 + MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0 + MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0 + >; + }; + + pinctrl_lcdif_ctrl: lcdifctrlgrp { + fsl,pins = < + MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79 + MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79 + MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79 + MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79 + >; + }; + + pinctrl_lcdif_dat: lcdifdatgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79 + MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79 + MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79 + MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79 + MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79 + MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79 + MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79 + MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79 + MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79 + MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79 + MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79 + MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79 + MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79 + MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79 + MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79 + MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79 + MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79 + MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1 + MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1 + MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS 0x1b0b1 + MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS 0x1b0b1 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x17070 + MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x10070 + MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x17070 + MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x17070 + MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x17070 + MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x17070 + >; + }; + + pinctrl_tsc: tscgrp { + fsl,pin = < + MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0 + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0 + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 + MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0 + >; + }; +}; -- 2.7.0 -- | Michael Nazzareno Trimarchi Amarula Solutions BV | | COO - Founder Cruquiuskade 47 | | +31(0)851119172 Amsterdam 1018 AM NL | | [`as] http://www.amarulasolutions.com | ^ permalink raw reply related [flat|nested] 22+ messages in thread
* Re: [PATCH 0/4] Add support for Engicam IMX6UL module [not found] ` <1455963652-24618-1-git-send-email-michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> ` (3 preceding siblings ...) 2016-02-20 10:20 ` [PATCH 4/4] ARM: dts: imx6ul-geam: Add Engicam IMX6UL GEA M6UL initial support Michael Trimarchi @ 2016-03-30 11:47 ` Shawn Guo 2016-03-30 12:46 ` Michael Trimarchi 4 siblings, 1 reply; 22+ messages in thread From: Shawn Guo @ 2016-03-30 11:47 UTC (permalink / raw) To: Michael Trimarchi Cc: kernel-bIcnvbaLZ9MEGnE8C9+IrQ, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree-u79uwXL29TY76Z2rM5mHXA, fabio.estevam-KZfg59tc24xl57MIdRCFDg, computersforpeace-Re5JQEeQqe8AvxtiuMwx3w On Sat, Feb 20, 2016 at 11:20:48AM +0100, Michael Trimarchi wrote: > Thi patch series add the support for Engicam IMXUL product > > https://community.freescale.com/docs/DOC-328428 > > Based on Freescale™ i.MX 6UltraLite processor, a high performance, > ultra-efficient processor family featuring an advanced implementation > of a single ARM™ Cortex™-A7 core, which operates at speeds up to 528 MHz. > > The new ENGICAM GEA M6UL module is suitable for cost effective HMI > applications requiring high performance CPU. > > Michael Trimarchi (4): > ARM: dts: imx6ul: Add flexcan1 and flexcan2 support > ARM: dts: imx6ul: Add LCDIF support > ARM: dts: imx6ul: Add GPMI nand controller support > ARM: dts: imx6ul-geam: Add Engicam IMX6UL GEA M6UL initial support There are quite some changes around imx6ul.dtsi getting into 4.6-rc1. Can you please rebase onto 4.6-rc1 and resend? Shawn > > arch/arm/boot/dts/Makefile | 3 +- > arch/arm/boot/dts/imx6ul-geam-kit.dts | 102 +++++++++ > arch/arm/boot/dts/imx6ul-geam.dtsi | 371 +++++++++++++++++++++++++++++++++ > arch/arm/boot/dts/imx6ul.dtsi | 68 ++++++ > drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 10 + > drivers/mtd/nand/gpmi-nand/gpmi-nand.h | 6 +- > 6 files changed, 557 insertions(+), 3 deletions(-) > create mode 100644 arch/arm/boot/dts/imx6ul-geam-kit.dts > create mode 100644 arch/arm/boot/dts/imx6ul-geam.dtsi > > -- > 2.7.0 > > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH 0/4] Add support for Engicam IMX6UL module 2016-03-30 11:47 ` [PATCH 0/4] Add support for Engicam IMX6UL module Shawn Guo @ 2016-03-30 12:46 ` Michael Trimarchi 0 siblings, 0 replies; 22+ messages in thread From: Michael Trimarchi @ 2016-03-30 12:46 UTC (permalink / raw) To: Shawn Guo Cc: Fabio Estevam, devicetree@vger.kernel.org, Brian Norris, linux-arm-kernel, Sascha Hauer Hi On Wed, Mar 30, 2016 at 1:47 PM, Shawn Guo <shawnguo@kernel.org> wrote: > On Sat, Feb 20, 2016 at 11:20:48AM +0100, Michael Trimarchi wrote: >> Thi patch series add the support for Engicam IMXUL product >> >> https://community.freescale.com/docs/DOC-328428 >> >> Based on Freescale™ i.MX 6UltraLite processor, a high performance, >> ultra-efficient processor family featuring an advanced implementation >> of a single ARM™ Cortex™-A7 core, which operates at speeds up to 528 MHz. >> >> The new ENGICAM GEA M6UL module is suitable for cost effective HMI >> applications requiring high performance CPU. >> >> Michael Trimarchi (4): >> ARM: dts: imx6ul: Add flexcan1 and flexcan2 support >> ARM: dts: imx6ul: Add LCDIF support >> ARM: dts: imx6ul: Add GPMI nand controller support >> ARM: dts: imx6ul-geam: Add Engicam IMX6UL GEA M6UL initial support > > There are quite some changes around imx6ul.dtsi getting into 4.6-rc1. > Can you please rebase onto 4.6-rc1 and resend? > I will prepare tonight again, let test them tomorrow and send back tomorrow evening Michael > Shawn > >> >> arch/arm/boot/dts/Makefile | 3 +- >> arch/arm/boot/dts/imx6ul-geam-kit.dts | 102 +++++++++ >> arch/arm/boot/dts/imx6ul-geam.dtsi | 371 +++++++++++++++++++++++++++++++++ >> arch/arm/boot/dts/imx6ul.dtsi | 68 ++++++ >> drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 10 + >> drivers/mtd/nand/gpmi-nand/gpmi-nand.h | 6 +- >> 6 files changed, 557 insertions(+), 3 deletions(-) >> create mode 100644 arch/arm/boot/dts/imx6ul-geam-kit.dts >> create mode 100644 arch/arm/boot/dts/imx6ul-geam.dtsi >> >> -- >> 2.7.0 >> >> -- | Michael Nazzareno Trimarchi Amarula Solutions BV | | COO - Founder Cruquiuskade 47 | | +31(0)851119172 Amsterdam 1018 AM NL | | [`as] http://www.amarulasolutions.com | _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 22+ messages in thread
end of thread, other threads:[~2016-03-30 12:46 UTC | newest]
Thread overview: 22+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-02-20 10:20 [PATCH 0/4] Add support for Engicam IMX6UL module Michael Trimarchi
[not found] ` <1455963652-24618-1-git-send-email-michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2016-02-20 10:20 ` [PATCH 1/4] ARM: dts: imx6ul: Add flexcan1 and flexcan2 support Michael Trimarchi
[not found] ` <1455963652-24618-2-git-send-email-michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2016-02-20 14:02 ` Fabio Estevam
[not found] ` <CAOMZO5Bk_ZMhYzFLRFNK2TQvK4KHuj62AM_6uF-m-P1kJupTHQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-02-20 17:18 ` Michael Trimarchi
2016-02-20 17:29 ` Fabio Estevam
2016-02-21 11:18 ` [PATCH V2 " Michael Trimarchi
2016-02-20 10:20 ` [PATCH 2/4] ARM: dts: imx6ul: Add LCDIF support Michael Trimarchi
2016-02-20 10:20 ` [PATCH 3/4] ARM: dts: imx6ul: Add GPMI nand controller support Michael Trimarchi
[not found] ` <1455963652-24618-4-git-send-email-michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2016-02-20 11:57 ` Fabio Estevam
[not found] ` <CAOMZO5DTmG7Umt+H20r+tZi9zZhsK=eoPbHOBO3iwvM2GXXLgg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-02-20 17:21 ` Michael Trimarchi
2016-02-21 11:29 ` [PATCH V2 " Michael Trimarchi
2016-02-22 8:26 ` Lothar Waßmann
[not found] ` <20160222092613.3c32a4a0-VjFSrY7JcPWvSplVBqRQBQ@public.gmane.org>
2016-03-20 8:44 ` Michael Trimarchi
[not found] ` <CAOf5uwkn6k1YfMkMMSksKjakpP-NXsU0G9x0dyBao7n7NXSYug-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-03-21 9:47 ` Lothar Waßmann
[not found] ` <20160321104718.05834ffa-VjFSrY7JcPWvSplVBqRQBQ@public.gmane.org>
2016-03-22 7:44 ` Michael Trimarchi
2016-02-20 10:20 ` [PATCH 4/4] ARM: dts: imx6ul-geam: Add Engicam IMX6UL GEA M6UL initial support Michael Trimarchi
[not found] ` <1455963652-24618-5-git-send-email-michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2016-02-20 14:11 ` Fabio Estevam
[not found] ` <CAOMZO5AmePs3aE2zRSXcSS8iKQ0m2kvTAezsfHS13e-Zv1HCrA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-02-20 17:19 ` Michael Trimarchi
2016-02-20 17:30 ` Fabio Estevam
2016-02-21 15:32 ` [PATCH V2 " Michael Trimarchi
2016-03-30 11:47 ` [PATCH 0/4] Add support for Engicam IMX6UL module Shawn Guo
2016-03-30 12:46 ` Michael Trimarchi
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).