* [PATCH v8 0/3] PIC32MZDA Clock Driver
@ 2016-02-24 16:07 Joshua Henderson
2016-02-24 16:07 ` [PATCH v8 1/3] dt/bindings: Add PIC32 clock binding documentation Joshua Henderson
2016-02-24 16:07 ` [PATCH v8 3/3] MIPS: dts: pic32: Update dts to reflect new PIC32MZDA clk binding Joshua Henderson
0 siblings, 2 replies; 4+ messages in thread
From: Joshua Henderson @ 2016-02-24 16:07 UTC (permalink / raw)
To: linux-kernel
Cc: linux-mips, ralf, Joshua Henderson, devicetree, linux-clk,
Purna Chandra Mandal, Rob Herring, Sandeep Sheriker
Clock bindings got acked and then essentially unacked, while the clock
driver never made it upstream. In the meantime, the initial DTS file
made it upstream. This latest patch series includes a patch to go back
and correct the DTS files to reflect the new clock bindings in this
patch series.
This series still uses the CLK_OF_DECLARE approach despite not being
regarded as the best approach. On MIPS/PIC32 the first call of clk_get()
happens from "start_kernel -> time_init() -> plat_time_init()" which is
very early in boot sequence even before execution of early_initcall().
In short, by platform_driver way I was not able to register clock(s)
before the first clock user becomes ready. With CLK_OF_DECLARE() I can
explicitly call of_clk_init() in plat_time_init() just before calling
clk_get().
Purna Chandra Mandal (3):
dt/bindings: Add PIC32 clock binding documentation
clk: clk-pic32: Add PIC32 clock driver
MIPS: dts: pic32: Update dts to reflect new PIC32MZDA clk binding
.../devicetree/bindings/clock/microchip,pic32.txt | 39 +
arch/mips/boot/dts/pic32/pic32mzda-clk.dtsi | 236 -----
arch/mips/boot/dts/pic32/pic32mzda.dtsi | 63 +-
arch/mips/boot/dts/pic32/pic32mzda_sk.dts | 5 +-
drivers/clk/Kconfig | 3 +
drivers/clk/Makefile | 1 +
drivers/clk/microchip/Makefile | 2 +
drivers/clk/microchip/clk-core.c | 954 ++++++++++++++++++++
drivers/clk/microchip/clk-core.h | 78 ++
drivers/clk/microchip/clk-pic32mzda.c | 214 +++++
include/dt-bindings/clock/microchip,pic32-clock.h | 42 +
11 files changed, 1378 insertions(+), 259 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/microchip,pic32.txt
delete mode 100644 arch/mips/boot/dts/pic32/pic32mzda-clk.dtsi
create mode 100644 drivers/clk/microchip/Makefile
create mode 100644 drivers/clk/microchip/clk-core.c
create mode 100644 drivers/clk/microchip/clk-core.h
create mode 100644 drivers/clk/microchip/clk-pic32mzda.c
create mode 100644 include/dt-bindings/clock/microchip,pic32-clock.h
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH v8 1/3] dt/bindings: Add PIC32 clock binding documentation
2016-02-24 16:07 [PATCH v8 0/3] PIC32MZDA Clock Driver Joshua Henderson
@ 2016-02-24 16:07 ` Joshua Henderson
2016-02-24 20:57 ` Michael Turquette
2016-02-24 16:07 ` [PATCH v8 3/3] MIPS: dts: pic32: Update dts to reflect new PIC32MZDA clk binding Joshua Henderson
1 sibling, 1 reply; 4+ messages in thread
From: Joshua Henderson @ 2016-02-24 16:07 UTC (permalink / raw)
To: linux-kernel
Cc: linux-mips, ralf, Purna Chandra Mandal, Joshua Henderson,
Michael Turquette, Stephen Boyd, Rob Herring, Pawel Moll,
Mark Rutland, Ian Campbell, Kumar Gala, devicetree
From: Purna Chandra Mandal <purna.mandal@microchip.com>
Document the devicetree bindings for the clock driver found on Microchip
PIC32 class devices.
Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Rob Herring <robh@kernel.org>
---
Note: Please pull this complete series through the MIPS tree.
Changes since v7: None
Changes since v6:
- Update Microchip PIC32 clock binding document based on review
- Add header defining clocks
Changes since v5: None
Changes since v4: None
Changes since v3: None
Changes since v2:
- Force lowercase in PIC32 clock binding documentation
Changes since v1: None
---
.../devicetree/bindings/clock/microchip,pic32.txt | 39 ++++++++++++++++++
include/dt-bindings/clock/microchip,pic32-clock.h | 42 ++++++++++++++++++++
2 files changed, 81 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/microchip,pic32.txt
create mode 100644 include/dt-bindings/clock/microchip,pic32-clock.h
diff --git a/Documentation/devicetree/bindings/clock/microchip,pic32.txt b/Documentation/devicetree/bindings/clock/microchip,pic32.txt
new file mode 100644
index 0000000..5352718
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/microchip,pic32.txt
@@ -0,0 +1,39 @@
+Microchip PIC32 Clock Controller Binding
+----------------------------------------
+Microchip clock controller is consists of few oscillators, PLL, multiplexer
+and few divider modules.
+
+This binding uses common clock bindings.
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible: shall be "microchip,pic32mzda-clk".
+- reg: shall contain base address and length of clock registers.
+- #clock-cells: shall be 1.
+
+Optional properties:
+- microchip,pic32mzda-sosc: shall be added only if platform has
+ secondary oscillator connected.
+
+Example:
+ rootclk: clock-controller@1f801200 {
+ compatible = "microchip,pic32mzda-clk";
+ reg = <0x1f801200 0x200>;
+ #clock-cells = <1>;
+ /* optional */
+ microchip,pic32mzda-sosc;
+ };
+
+
+The clock consumer shall specify the desired clock-output of the clock
+controller (as defined in [2]) by specifying output-id in its "clock"
+phandle cell.
+[2] include/dt-bindings/clock/microchip,pic32-clock.h
+
+For example for UART2:
+uart2: serial@2 {
+ compatible = "microchip,pic32mzda-uart";
+ reg = <>;
+ interrupts = <>;
+ clocks = <&rootclk PB2CLK>;
+};
diff --git a/include/dt-bindings/clock/microchip,pic32-clock.h b/include/dt-bindings/clock/microchip,pic32-clock.h
new file mode 100644
index 0000000..184647a6
--- /dev/null
+++ b/include/dt-bindings/clock/microchip,pic32-clock.h
@@ -0,0 +1,42 @@
+/*
+ * Purna Chandra Mandal,<purna.mandal@microchip.com>
+ * Copyright (C) 2015 Microchip Technology Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+
+#ifndef _DT_BINDINGS_CLK_MICROCHIP_PIC32_H_
+#define _DT_BINDINGS_CLK_MICROCHIP_PIC32_H_
+
+/* clock output indices */
+#define POSCCLK 0
+#define FRCCLK 1
+#define BFRCCLK 2
+#define LPRCCLK 3
+#define SOSCCLK 4
+#define FRCDIVCLK 5
+#define PLLCLK 6
+#define SCLK 7
+#define PB1CLK 8
+#define PB2CLK 9
+#define PB3CLK 10
+#define PB4CLK 11
+#define PB5CLK 12
+#define PB6CLK 13
+#define PB7CLK 14
+#define REF1CLK 15
+#define REF2CLK 16
+#define REF3CLK 17
+#define REF4CLK 18
+#define REF5CLK 19
+#define UPLLCLK 20
+#define MAXCLKS 21
+
+#endif /* _DT_BINDINGS_CLK_MICROCHIP_PIC32_H_ */
--
1.7.9.5
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH v8 3/3] MIPS: dts: pic32: Update dts to reflect new PIC32MZDA clk binding
2016-02-24 16:07 [PATCH v8 0/3] PIC32MZDA Clock Driver Joshua Henderson
2016-02-24 16:07 ` [PATCH v8 1/3] dt/bindings: Add PIC32 clock binding documentation Joshua Henderson
@ 2016-02-24 16:07 ` Joshua Henderson
1 sibling, 0 replies; 4+ messages in thread
From: Joshua Henderson @ 2016-02-24 16:07 UTC (permalink / raw)
To: linux-kernel
Cc: linux-mips, ralf, Purna Chandra Mandal, Joshua Henderson,
Michael Turquette, Stephen Boyd, Rob Herring, Pawel Moll,
Mark Rutland, Ian Campbell, Kumar Gala, Sandeep Sheriker,
devicetree
From: Purna Chandra Mandal <purna.mandal@microchip.com>
- now clock nodes definition is merged with core .dtsi file
- only one rootclk is now part of DT
- clock clients also updated based on new binding doc
Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
---
Note: Please pull this complete series through the MIPS tree.
---
arch/mips/boot/dts/pic32/pic32mzda-clk.dtsi | 236 ---------------------------
arch/mips/boot/dts/pic32/pic32mzda.dtsi | 63 ++++---
arch/mips/boot/dts/pic32/pic32mzda_sk.dts | 5 +-
3 files changed, 45 insertions(+), 259 deletions(-)
delete mode 100644 arch/mips/boot/dts/pic32/pic32mzda-clk.dtsi
diff --git a/arch/mips/boot/dts/pic32/pic32mzda-clk.dtsi b/arch/mips/boot/dts/pic32/pic32mzda-clk.dtsi
deleted file mode 100644
index ef13350..0000000
--- a/arch/mips/boot/dts/pic32/pic32mzda-clk.dtsi
+++ /dev/null
@@ -1,236 +0,0 @@
-/*
- * Device Tree Source for PIC32MZDA clock data
- *
- * Purna Chandra Mandal <purna.mandal@microchip.com>
- * Copyright (C) 2015 Microchip Technology Inc. All rights reserved.
- *
- * Licensed under GPLv2 or later.
- */
-
-/* all fixed rate clocks */
-
-/ {
- POSC:posc_clk { /* On-chip primary oscillator */
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <24000000>;
- };
-
- FRC:frc_clk { /* internal FRC oscillator */
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <8000000>;
- };
-
- BFRC:bfrc_clk { /* internal backup FRC oscillator */
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <8000000>;
- };
-
- LPRC:lprc_clk { /* internal low-power FRC oscillator */
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <32000>;
- };
-
- /* UPLL provides clock to USBCORE */
- UPLL:usb_phy_clk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <24000000>;
- clock-output-names = "usbphy_clk";
- };
-
- TxCKI:txcki_clk { /* external clock input on TxCLKI pin */
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <4000000>;
- status = "disabled";
- };
-
- /* external clock input on REFCLKIx pin */
- REFIx:refix_clk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <24000000>;
- status = "disabled";
- };
-
- /* PIC32 specific clks */
- pic32_clktree {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x1f801200 0x200>;
- compatible = "microchip,pic32mzda-clk";
- ranges = <0 0x1f801200 0x200>;
-
- /* secondary oscillator; external input on SOSCI pin */
- SOSC:sosc_clk@0 {
- #clock-cells = <0>;
- compatible = "microchip,pic32mzda-sosc";
- clock-frequency = <32768>;
- reg = <0x000 0x10>, /* enable reg */
- <0x1d0 0x10>; /* status reg */
- microchip,bit-mask = <0x02>; /* enable mask */
- microchip,status-bit-mask = <0x10>; /* status-mask*/
- };
-
- FRCDIV:frcdiv_clk {
- #clock-cells = <0>;
- compatible = "microchip,pic32mzda-frcdivclk";
- clocks = <&FRC>;
- clock-output-names = "frcdiv_clk";
- };
-
- /* System PLL clock */
- SYSPLL:spll_clk@020 {
- #clock-cells = <0>;
- compatible = "microchip,pic32mzda-syspll";
- reg = <0x020 0x10>, /* SPLL register */
- <0x1d0 0x10>; /* CLKSTAT register */
- clocks = <&POSC>, <&FRC>;
- clock-output-names = "sys_pll";
- microchip,status-bit-mask = <0x80>; /* SPLLRDY */
- };
-
- /* system clock; mux with postdiv & slew */
- SYSCLK:sys_clk@1c0 {
- #clock-cells = <0>;
- compatible = "microchip,pic32mzda-sysclk-v2";
- reg = <0x1c0 0x04>; /* SLEWCON */
- clocks = <&FRCDIV>, <&SYSPLL>, <&POSC>, <&SOSC>,
- <&LPRC>, <&FRCDIV>;
- microchip,clock-indices = <0>, <1>, <2>, <4>,
- <5>, <7>;
- clock-output-names = "sys_clk";
- };
-
- /* Peripheral bus1 clock */
- PBCLK1:pb1_clk@140 {
- reg = <0x140 0x10>;
- #clock-cells = <0>;
- compatible = "microchip,pic32mzda-pbclk";
- clocks = <&SYSCLK>;
- clock-output-names = "pb1_clk";
- /* used by system modules, not gateable */
- microchip,ignore-unused;
- };
-
- /* Peripheral bus2 clock */
- PBCLK2:pb2_clk@150 {
- reg = <0x150 0x10>;
- #clock-cells = <0>;
- compatible = "microchip,pic32mzda-pbclk";
- clocks = <&SYSCLK>;
- clock-output-names = "pb2_clk";
- /* avoid gating even if unused */
- microchip,ignore-unused;
- };
-
- /* Peripheral bus3 clock */
- PBCLK3:pb3_clk@160 {
- reg = <0x160 0x10>;
- #clock-cells = <0>;
- compatible = "microchip,pic32mzda-pbclk";
- clocks = <&SYSCLK>;
- clock-output-names = "pb3_clk";
- };
-
- /* Peripheral bus4 clock(I/O ports, GPIO) */
- PBCLK4:pb4_clk@170 {
- reg = <0x170 0x10>;
- #clock-cells = <0>;
- compatible = "microchip,pic32mzda-pbclk";
- clocks = <&SYSCLK>;
- clock-output-names = "pb4_clk";
- };
-
- /* Peripheral bus clock */
- PBCLK5:pb5_clk@180 {
- reg = <0x180 0x10>;
- #clock-cells = <0>;
- compatible = "microchip,pic32mzda-pbclk";
- clocks = <&SYSCLK>;
- clock-output-names = "pb5_clk";
- };
-
- /* Peripheral Bus6 clock; */
- PBCLK6:pb6_clk@190 {
- reg = <0x190 0x10>;
- compatible = "microchip,pic32mzda-pbclk";
- clocks = <&SYSCLK>;
- #clock-cells = <0>;
- };
-
- /* Peripheral bus7 clock */
- PBCLK7:pb7_clk@1a0 {
- reg = <0x1a0 0x10>;
- #clock-cells = <0>;
- compatible = "microchip,pic32mzda-pbclk";
- /* CPU is driven by this clock; so named */
- clock-output-names = "cpu_clk";
- clocks = <&SYSCLK>;
- };
-
- /* Reference Oscillator clock for SPI/I2S */
- REFCLKO1:refo1_clk@80 {
- reg = <0x080 0x20>;
- #clock-cells = <0>;
- compatible = "microchip,pic32mzda-refoclk";
- clocks = <&SYSCLK>, <&PBCLK1>, <&POSC>, <&FRC>, <&LPRC>,
- <&SOSC>, <&SYSPLL>, <&REFIx>, <&BFRC>;
- microchip,clock-indices = <0>, <1>, <2>, <3>, <4>,
- <5>, <7>, <8>, <9>;
- clock-output-names = "refo1_clk";
- };
-
- /* Reference Oscillator clock for SQI */
- REFCLKO2:refo2_clk@a0 {
- reg = <0x0a0 0x20>;
- #clock-cells = <0>;
- compatible = "microchip,pic32mzda-refoclk";
- clocks = <&SYSCLK>, <&PBCLK1>, <&POSC>, <&FRC>, <&LPRC>,
- <&SOSC>, <&SYSPLL>, <&REFIx>, <&BFRC>;
- microchip,clock-indices = <0>, <1>, <2>, <3>, <4>,
- <5>, <7>, <8>, <9>;
- clock-output-names = "refo2_clk";
- };
-
- /* Reference Oscillator clock, ADC */
- REFCLKO3:refo3_clk@c0 {
- reg = <0x0c0 0x20>;
- compatible = "microchip,pic32mzda-refoclk";
- clocks = <&SYSCLK>, <&PBCLK1>, <&POSC>, <&FRC>, <&LPRC>,
- <&SOSC>, <&SYSPLL>, <&REFIx>, <&BFRC>;
- microchip,clock-indices = <0>, <1>, <2>, <3>, <4>,
- <5>, <7>, <8>, <9>;
- #clock-cells = <0>;
- clock-output-names = "refo3_clk";
- };
-
- /* Reference Oscillator clock */
- REFCLKO4:refo4_clk@e0 {
- reg = <0x0e0 0x20>;
- compatible = "microchip,pic32mzda-refoclk";
- clocks = <&SYSCLK>, <&PBCLK1>, <&POSC>, <&FRC>, <&LPRC>,
- <&SOSC>, <&SYSPLL>, <&REFIx>, <&BFRC>;
- microchip,clock-indices = <0>, <1>, <2>, <3>, <4>,
- <5>, <7>, <8>, <9>;
- #clock-cells = <0>;
- clock-output-names = "refo4_clk";
- };
-
- /* Reference Oscillator clock, LCD */
- REFCLKO5:refo5_clk@100 {
- reg = <0x100 0x20>;
- compatible = "microchip,pic32mzda-refoclk";
- clocks = <&SYSCLK>,<&PBCLK1>,<&POSC>,<&FRC>,<&LPRC>,
- <&SOSC>,<&SYSPLL>,<&REFIx>,<&BFRC>;
- microchip,clock-indices = <0>, <1>, <2>, <3>, <4>,
- <5>, <7>, <8>, <9>;
- #clock-cells = <0>;
- clock-output-names = "refo5_clk";
- };
- };
-};
diff --git a/arch/mips/boot/dts/pic32/pic32mzda.dtsi b/arch/mips/boot/dts/pic32/pic32mzda.dtsi
index ad9e3318..5353a63 100644
--- a/arch/mips/boot/dts/pic32/pic32mzda.dtsi
+++ b/arch/mips/boot/dts/pic32/pic32mzda.dtsi
@@ -6,11 +6,9 @@
* published by the Free Software Foundation.
*
*/
-
+#include <dt-bindings/clock/microchip,pic32-clock.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include "pic32mzda-clk.dtsi"
-
/ {
#address-cells = <1>;
#size-cells = <1>;
@@ -50,6 +48,29 @@
interrupts = <0 IRQ_TYPE_EDGE_RISING>;
};
+ /* external clock input on TxCLKI pin */
+ txcki: txcki_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <4000000>;
+ status = "disabled";
+ };
+
+ /* external input on REFCLKIx pin */
+ refix: refix_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ status = "disabled";
+ };
+
+ rootclk: clock-controller@1f801200 {
+ compatible = "microchip,pic32mzda-clk";
+ reg = <0x1f801200 0x200>;
+ #clock-cells = <1>;
+ microchip,pic32mzda-sosc;
+ };
+
evic: interrupt-controller@1f810000 {
compatible = "microchip,pic32mzda-evic";
interrupt-controller;
@@ -63,7 +84,7 @@
#size-cells = <1>;
compatible = "microchip,pic32mzda-pinctrl";
reg = <0x1f801400 0x400>;
- clocks = <&PBCLK1>;
+ clocks = <&rootclk PB1CLK>;
};
/* PORTA */
@@ -75,7 +96,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&PBCLK4>;
+ clocks = <&rootclk PB4CLK>;
microchip,gpio-bank = <0>;
gpio-ranges = <&pic32_pinctrl 0 0 16>;
};
@@ -89,7 +110,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&PBCLK4>;
+ clocks = <&rootclk PB4CLK>;
microchip,gpio-bank = <1>;
gpio-ranges = <&pic32_pinctrl 0 16 16>;
};
@@ -103,7 +124,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&PBCLK4>;
+ clocks = <&rootclk PB4CLK>;
microchip,gpio-bank = <2>;
gpio-ranges = <&pic32_pinctrl 0 32 16>;
};
@@ -117,7 +138,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&PBCLK4>;
+ clocks = <&rootclk PB4CLK>;
microchip,gpio-bank = <3>;
gpio-ranges = <&pic32_pinctrl 0 48 16>;
};
@@ -131,7 +152,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&PBCLK4>;
+ clocks = <&rootclk PB4CLK>;
microchip,gpio-bank = <4>;
gpio-ranges = <&pic32_pinctrl 0 64 16>;
};
@@ -145,7 +166,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&PBCLK4>;
+ clocks = <&rootclk PB4CLK>;
microchip,gpio-bank = <5>;
gpio-ranges = <&pic32_pinctrl 0 80 16>;
};
@@ -159,7 +180,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&PBCLK4>;
+ clocks = <&rootclk PB4CLK>;
microchip,gpio-bank = <6>;
gpio-ranges = <&pic32_pinctrl 0 96 16>;
};
@@ -173,7 +194,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&PBCLK4>;
+ clocks = <&rootclk PB4CLK>;
microchip,gpio-bank = <7>;
gpio-ranges = <&pic32_pinctrl 0 112 16>;
};
@@ -189,7 +210,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&PBCLK4>;
+ clocks = <&rootclk PB4CLK>;
microchip,gpio-bank = <8>;
gpio-ranges = <&pic32_pinctrl 0 128 16>;
};
@@ -203,7 +224,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&PBCLK4>;
+ clocks = <&rootclk PB4CLK>;
microchip,gpio-bank = <9>;
gpio-ranges = <&pic32_pinctrl 0 144 16>;
};
@@ -212,7 +233,7 @@
compatible = "microchip,pic32mzda-sdhci";
reg = <0x1f8ec000 0x100>;
interrupts = <191 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&REFCLKO4>, <&PBCLK5>;
+ clocks = <&rootclk REF4CLK>, <&rootclk PB5CLK>;
clock-names = "base_clk", "sys_clk";
bus-width = <4>;
cap-sd-highspeed;
@@ -225,7 +246,7 @@
interrupts = <112 IRQ_TYPE_LEVEL_HIGH>,
<113 IRQ_TYPE_LEVEL_HIGH>,
<114 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&PBCLK2>;
+ clocks = <&rootclk PB2CLK>;
status = "disabled";
};
@@ -235,7 +256,7 @@
interrupts = <145 IRQ_TYPE_LEVEL_HIGH>,
<146 IRQ_TYPE_LEVEL_HIGH>,
<147 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&PBCLK2>;
+ clocks = <&rootclk PB2CLK>;
status = "disabled";
};
@@ -245,7 +266,7 @@
interrupts = <157 IRQ_TYPE_LEVEL_HIGH>,
<158 IRQ_TYPE_LEVEL_HIGH>,
<159 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&PBCLK2>;
+ clocks = <&rootclk PB2CLK>;
status = "disabled";
};
@@ -255,7 +276,7 @@
interrupts = <170 IRQ_TYPE_LEVEL_HIGH>,
<171 IRQ_TYPE_LEVEL_HIGH>,
<172 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&PBCLK2>;
+ clocks = <&rootclk PB2CLK>;
status = "disabled";
};
@@ -265,7 +286,7 @@
interrupts = <179 IRQ_TYPE_LEVEL_HIGH>,
<180 IRQ_TYPE_LEVEL_HIGH>,
<181 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&PBCLK2>;
+ clocks = <&rootclk PB2CLK>;
status = "disabled";
};
@@ -275,7 +296,7 @@
interrupts = <188 IRQ_TYPE_LEVEL_HIGH>,
<189 IRQ_TYPE_LEVEL_HIGH>,
<190 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&PBCLK2>;
+ clocks = <&rootclk PB2CLK>;
status = "disabled";
};
};
diff --git a/arch/mips/boot/dts/pic32/pic32mzda_sk.dts b/arch/mips/boot/dts/pic32/pic32mzda_sk.dts
index 5d434a5..fc74010 100644
--- a/arch/mips/boot/dts/pic32/pic32mzda_sk.dts
+++ b/arch/mips/boot/dts/pic32/pic32mzda_sk.dts
@@ -95,8 +95,9 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sdhc1>;
status = "okay";
- assigned-clocks = <&REFCLKO2>,<&REFCLKO4>,<&REFCLKO5>;
- assigned-clock-rates = <50000000>,<25000000>,<40000000>;
+ assigned-clocks = <&rootclk REF2CLK>, <&rootclk REF4CLK>,
+ <&rootclk REF5CLK>;
+ assigned-clock-rates = <50000000>, <25000000>, <40000000>;
};
&pic32_pinctrl {
--
1.7.9.5
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH v8 1/3] dt/bindings: Add PIC32 clock binding documentation
2016-02-24 16:07 ` [PATCH v8 1/3] dt/bindings: Add PIC32 clock binding documentation Joshua Henderson
@ 2016-02-24 20:57 ` Michael Turquette
0 siblings, 0 replies; 4+ messages in thread
From: Michael Turquette @ 2016-02-24 20:57 UTC (permalink / raw)
To: linux-kernel
Cc: linux-mips, ralf, Purna Chandra Mandal, Joshua Henderson,
Stephen Boyd, Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell,
Kumar Gala, devicetree
Quoting Joshua Henderson (2016-02-24 08:07:15)
> From: Purna Chandra Mandal <purna.mandal@microchip.com>
>
> Document the devicetree bindings for the clock driver found on Microchip
> PIC32 class devices.
>
> Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
> Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
> Cc: Ralf Baechle <ralf@linux-mips.org>
> Cc: Michael Turquette <mturquette@baylibre.com>
> Cc: Stephen Boyd <sboyd@codeaurora.org>
> Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Michael Turquette <mturquette@baylibre.com>
> ---
> Note: Please pull this complete series through the MIPS tree.
>
> Changes since v7: None
> Changes since v6:
> - Update Microchip PIC32 clock binding document based on review
> - Add header defining clocks
> Changes since v5: None
> Changes since v4: None
> Changes since v3: None
> Changes since v2:
> - Force lowercase in PIC32 clock binding documentation
> Changes since v1: None
> ---
> .../devicetree/bindings/clock/microchip,pic32.txt | 39 ++++++++++++++++++
> include/dt-bindings/clock/microchip,pic32-clock.h | 42 ++++++++++++++++++++
> 2 files changed, 81 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/microchip,pic32.txt
> create mode 100644 include/dt-bindings/clock/microchip,pic32-clock.h
>
> diff --git a/Documentation/devicetree/bindings/clock/microchip,pic32.txt b/Documentation/devicetree/bindings/clock/microchip,pic32.txt
> new file mode 100644
> index 0000000..5352718
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/microchip,pic32.txt
> @@ -0,0 +1,39 @@
> +Microchip PIC32 Clock Controller Binding
> +----------------------------------------
> +Microchip clock controller is consists of few oscillators, PLL, multiplexer
> +and few divider modules.
> +
> +This binding uses common clock bindings.
> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> +
> +Required properties:
> +- compatible: shall be "microchip,pic32mzda-clk".
> +- reg: shall contain base address and length of clock registers.
> +- #clock-cells: shall be 1.
> +
> +Optional properties:
> +- microchip,pic32mzda-sosc: shall be added only if platform has
> + secondary oscillator connected.
> +
> +Example:
> + rootclk: clock-controller@1f801200 {
> + compatible = "microchip,pic32mzda-clk";
> + reg = <0x1f801200 0x200>;
> + #clock-cells = <1>;
> + /* optional */
> + microchip,pic32mzda-sosc;
> + };
> +
> +
> +The clock consumer shall specify the desired clock-output of the clock
> +controller (as defined in [2]) by specifying output-id in its "clock"
> +phandle cell.
> +[2] include/dt-bindings/clock/microchip,pic32-clock.h
> +
> +For example for UART2:
> +uart2: serial@2 {
> + compatible = "microchip,pic32mzda-uart";
> + reg = <>;
> + interrupts = <>;
> + clocks = <&rootclk PB2CLK>;
> +};
> diff --git a/include/dt-bindings/clock/microchip,pic32-clock.h b/include/dt-bindings/clock/microchip,pic32-clock.h
> new file mode 100644
> index 0000000..184647a6
> --- /dev/null
> +++ b/include/dt-bindings/clock/microchip,pic32-clock.h
> @@ -0,0 +1,42 @@
> +/*
> + * Purna Chandra Mandal,<purna.mandal@microchip.com>
> + * Copyright (C) 2015 Microchip Technology Inc. All rights reserved.
> + *
> + * This program is free software; you can distribute it and/or modify it
> + * under the terms of the GNU General Public License (Version 2) as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
> + * for more details.
> + */
> +
> +#ifndef _DT_BINDINGS_CLK_MICROCHIP_PIC32_H_
> +#define _DT_BINDINGS_CLK_MICROCHIP_PIC32_H_
> +
> +/* clock output indices */
> +#define POSCCLK 0
> +#define FRCCLK 1
> +#define BFRCCLK 2
> +#define LPRCCLK 3
> +#define SOSCCLK 4
> +#define FRCDIVCLK 5
> +#define PLLCLK 6
> +#define SCLK 7
> +#define PB1CLK 8
> +#define PB2CLK 9
> +#define PB3CLK 10
> +#define PB4CLK 11
> +#define PB5CLK 12
> +#define PB6CLK 13
> +#define PB7CLK 14
> +#define REF1CLK 15
> +#define REF2CLK 16
> +#define REF3CLK 17
> +#define REF4CLK 18
> +#define REF5CLK 19
> +#define UPLLCLK 20
> +#define MAXCLKS 21
> +
> +#endif /* _DT_BINDINGS_CLK_MICROCHIP_PIC32_H_ */
> --
> 1.7.9.5
>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2016-02-24 20:57 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-02-24 16:07 [PATCH v8 0/3] PIC32MZDA Clock Driver Joshua Henderson
2016-02-24 16:07 ` [PATCH v8 1/3] dt/bindings: Add PIC32 clock binding documentation Joshua Henderson
2016-02-24 20:57 ` Michael Turquette
2016-02-24 16:07 ` [PATCH v8 3/3] MIPS: dts: pic32: Update dts to reflect new PIC32MZDA clk binding Joshua Henderson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).