Re: [PATCH v7] rtc: rewrite DS1302 using SPI

[Alexandre Belloni <alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>]

On 23/02/2016 at 13:54:57 +0300, Sergei Ianovich wrote :
> DS1302 is half-duplex SPI device. The driver respects this fact now.
> 
> Pin configurations should be implemented using SPI subsystem.
> 
> Signed-off-by: Sergei Ianovich <ynvich-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> CC: Alexandre Belloni <alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
> CC: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> 
>    v6..v7
>    * change binding and doc file names
> 
>    v5..v6
>    * rewrite the driver as an SPI slave device
>    * use "maxim" for vendor name per Kconfig
>    * stop changing device RAM in device presence test
>    * only return time from device if valid
>    * use burst mode for reading/writing time
>    * dropped charging control. I cannot test it, and it looks broken
> 
>    v4..v5
>    * drop THIS_MODULE from struct platform driver
>    * use "dallas" for vendor name per vendor-prefixes.txt
> 
>    v3..v4
>    * move DTS bindings to a different patch
> 
>    v2..v3
>    * use usleep_range instead of custom nsleep
>    * number change (07/16 -> 09/21)
> 
>    v0..v2
>    * use device tree
>    * use devm helpers where possible
> ---
>  .../devicetree/bindings/rtc/maxim-ds1302.txt       |  46 +++
>  drivers/rtc/Kconfig                                |  15 +-
>  drivers/rtc/rtc-ds1302.c                           | 348 ++++++++++-----------
>  3 files changed, 212 insertions(+), 197 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/rtc/maxim-ds1302.txt
> 
Applied, thanks.

-- 
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html