From mboxrd@z Thu Jan 1 00:00:00 1970 From: Alexandre Belloni Subject: Re: [rtc-linux] [PATCH v2] rtc: s3c: Document in binding that only s3c6410 needs a src clk Date: Tue, 29 Mar 2016 00:19:15 +0200 Message-ID: <20160328221915.GC2346@piout.net> References: <1455545466-25709-1-git-send-email-javier@osg.samsung.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <1455545466-25709-1-git-send-email-javier@osg.samsung.com> Sender: linux-samsung-soc-owner@vger.kernel.org To: Javier Martinez Canillas Cc: linux-kernel@vger.kernel.org, Rob Herring , linux-samsung-soc@vger.kernel.org, Krzysztof Kozlowski , rtc-linux@googlegroups.com, devicetree@vger.kernel.org List-Id: devicetree@vger.kernel.org On 15/02/2016 at 11:11:06 -0300, Javier Martinez Canillas wrote : > The S3C binding doc says that the RTC and RTC source clocks are required > but the S3C driver supports different HW IP and only the s3c6410 needs a > source clock. > > Fix the binding explaining that the source clock is only needed for the > s3c6410-rtc compatible controller. > > Reported-by: Krzysztof Kozlowski > Signed-off-by: Javier Martinez Canillas > Acked-by: Alexandre Belloni > > --- > Hello, > > This patch depends on a previous one that was picked by Rob Herring so > this one has to go through his tree again and not through the RTC tree > to avoid conflicts. > Well, I'm queuing that one in rtc-fixes for 4.6 -- Alexandre Belloni, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com