Re: [PATCH 0/4] Add support for Engicam IMX6UL module

[Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>]

On Sat, Feb 20, 2016 at 11:20:48AM +0100, Michael Trimarchi wrote:
> Thi patch series add the support for Engicam IMXUL product
> 
> https://community.freescale.com/docs/DOC-328428
> 
> Based on Freescale™ i.MX 6UltraLite processor, a high performance,
> ultra-efficient processor family featuring an advanced implementation
> of a single ARM™ Cortex™-A7 core, which operates at speeds up to 528 MHz.
> 
> The new ENGICAM GEA M6UL module is suitable for cost effective HMI
> applications requiring high performance CPU.
> 
> Michael Trimarchi (4):
>   ARM: dts: imx6ul: Add flexcan1 and flexcan2 support
>   ARM: dts: imx6ul: Add LCDIF support
>   ARM: dts: imx6ul: Add GPMI nand controller support
>   ARM: dts: imx6ul-geam: Add Engicam IMX6UL GEA M6UL initial support

There are quite some changes around imx6ul.dtsi getting into 4.6-rc1.
Can you please rebase onto 4.6-rc1 and resend?

Shawn

> 
>  arch/arm/boot/dts/Makefile             |   3 +-
>  arch/arm/boot/dts/imx6ul-geam-kit.dts  | 102 +++++++++
>  arch/arm/boot/dts/imx6ul-geam.dtsi     | 371 +++++++++++++++++++++++++++++++++
>  arch/arm/boot/dts/imx6ul.dtsi          |  68 ++++++
>  drivers/mtd/nand/gpmi-nand/gpmi-nand.c |  10 +
>  drivers/mtd/nand/gpmi-nand/gpmi-nand.h |   6 +-
>  6 files changed, 557 insertions(+), 3 deletions(-)
>  create mode 100644 arch/arm/boot/dts/imx6ul-geam-kit.dts
>  create mode 100644 arch/arm/boot/dts/imx6ul-geam.dtsi
> 
> -- 
> 2.7.0
> 
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html