Re: [PATCH 11/13] dtb: amd: Add PCIe SMMU device tree node

[Will Deacon <will.deacon@arm.com>]

On Thu, Mar 31, 2016 at 09:39:38AM +0200, Eric Auger wrote:
> On 03/30/2016 07:24 PM, Will Deacon wrote:
> > On Wed, Mar 30, 2016 at 05:57:08PM +0200, Eric Auger wrote:
> >> On 03/30/2016 05:45 PM, Will Deacon wrote:
> >>> On Wed, Mar 30, 2016 at 05:37:27PM +0200, Eric Auger wrote:
> >>>> On 01/28/2016 03:27 PM, Will Deacon wrote:
> >>>>> On Thu, Jan 28, 2016 at 03:17:33PM +0100, Arnd Bergmann wrote:
> >>>>>> On Thursday 28 January 2016 12:20:58 Robin Murphy wrote:
> >>>>>>>>
> >>>>>>> Any IDs specified here would only apply to DMA by the "platform device" 
> >>>>>>> side of the host controller itself (as would an equivalent "iommus" 
> >>>>>>> property on pcie0 once I finish the SMMUv2 generic binding support I'm 
> >>>>>>> working on). In terms of PCI devices, the "mmu-masters" property is 
> >>>>>>> overloaded such that only its existence matters, to identify that there 
> >>>>>>> _is_ a relationship between the SMMU and the PCI bus(es) behind that 
> >>>>>>> host controller.
> >>>>>>
> >>>>>> I wasn't aware that this was actually still specified. I had hoped
> >>>>>> we were getting rid of mmu-masters before anyone actually started
> >>>>>> using it, but now I see it in ns2.dtsi and fsl-ls2080a.dtsi.
> >>>>>>
> >>>>>> Does anyone know what happened to the plan to use the iommu DT binding
> >>>>>> for the ARM SMMU instead? Do we now have to support both ways indefinitely?
> >>>>>
> >>>>> We always did -- Seattle used the mmu-masters binding before the generic
> >>>>> binding even existed. Robin has been working on patches to get of_xlate
> >>>>> up and running, but it got held up by Laurent's series which didn't end
> >>>>> up going anywhere.
> >>>>>
> >>>> Up to now I have used the PCI smmu description as described in Suravee's
> >>>> patch and this does not work anymore with 4.6-rc1 since the default
> >>>> domain was introduced. So now I see 2 SMRs matching a single streamid
> >>>> (in my case 256, one steming from the "platform device" side of the host
> >>>> controller and one steming from the PCI device) and this causes SMCF
> >>>> (stream match conflict fault). So PCIe PF does not work.
> >>>
> >>> Sorry about that, it wasn't intentional. In fact, I wrote commit
> >>> cbf8277ef456 ("iommu/arm-smmu: Treat IOMMU_DOMAIN_DMA as bypass for now")
> >>> specifically to avoid this breakage, after seeing it myself with VFIO
> >>> and an S2CR-based configuration. It looks like the check just needs moving
> >>> higher up (i.e. before we initialise the SMRs).
> >>>
> >>> Does that fix it for you?
> >> Yes this fixes the issue for me, thanks! I guess you will send that patch?
> > 
> > I need to check that it doesn't break rebinding to the host after VFIO
> > has been used for passthrough, first.
> 
> OK. I can help testing too since I am currently working on PCIe
> passthrough respin.

Thanks, that would be really helpful if you have the time.

Will