From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lee Jones Subject: Re: [PATCH resend v2 3/9] mfd: axp20x: Add support for AXP809 PMIC Date: Mon, 11 Apr 2016 09:24:09 +0100 Message-ID: <20160411082409.GG4592@x1> References: <1459243352-23344-1-git-send-email-wens@csie.org> <1459243352-23344-4-git-send-email-wens@csie.org> Reply-To: lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable Return-path: Sender: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org Content-Disposition: inline In-Reply-To: <1459243352-23344-4-git-send-email-wens-jdAy2FN1RRM@public.gmane.org> List-Post: , List-Help: , List-Archive: , List-Unsubscribe: , To: Chen-Yu Tsai Cc: Liam Girdwood , Mark Brown , Maxime Ripard , linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org List-Id: devicetree@vger.kernel.org On Tue, 29 Mar 2016, Chen-Yu Tsai wrote: > The X-Powers AXP809 is a new PMIC that is paired with Allwinner's A80 > SoC, along with a slave AXP806 PMIC. >=20 > This PMIC is quite similar to the earlier AXP223, though the interrupts > and regulator have changed a bit. >=20 > This patch adds support for the interrupts and power button of the PMIC. >=20 > Signed-off-by: Chen-Yu Tsai > --- > drivers/mfd/axp20x-rsb.c | 1 + > drivers/mfd/axp20x.c | 79 ++++++++++++++++++++++++++++++++++++++++= ++++++ > include/linux/mfd/axp20x.h | 59 ++++++++++++++++++++++++++++++++++ > 3 files changed, 139 insertions(+) Applied, thanks. > diff --git a/drivers/mfd/axp20x-rsb.c b/drivers/mfd/axp20x-rsb.c > index 28c20247c112..a407527bcd09 100644 > --- a/drivers/mfd/axp20x-rsb.c > +++ b/drivers/mfd/axp20x-rsb.c > @@ -61,6 +61,7 @@ static int axp20x_rsb_remove(struct sunxi_rsb_device *r= dev) > =20 > static const struct of_device_id axp20x_rsb_of_match[] =3D { > { .compatible =3D "x-powers,axp223", .data =3D (void *)AXP223_ID }, > + { .compatible =3D "x-powers,axp809", .data =3D (void *)AXP809_ID }, > { }, > }; > MODULE_DEVICE_TABLE(of, axp20x_rsb_of_match); > diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c > index a57d6e940610..1ce923277cc8 100644 > --- a/drivers/mfd/axp20x.c > +++ b/drivers/mfd/axp20x.c > @@ -37,6 +37,7 @@ static const char * const axp20x_model_names[] =3D { > "AXP221", > "AXP223", > "AXP288", > + "AXP809", > }; > =20 > static const struct regmap_range axp152_writeable_ranges[] =3D { > @@ -85,6 +86,7 @@ static const struct regmap_access_table axp20x_volatile= _table =3D { > .n_yes_ranges =3D ARRAY_SIZE(axp20x_volatile_ranges), > }; > =20 > +/* AXP22x ranges are shared with the AXP809, as they cover the same rang= e */ > static const struct regmap_range axp22x_writeable_ranges[] =3D { > regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE), > regmap_reg_range(AXP20X_DCDC_MODE, AXP22X_BATLOW_THRES1), > @@ -211,6 +213,20 @@ static struct resource axp288_fuel_gauge_resources[]= =3D { > }, > }; > =20 > +static struct resource axp809_pek_resources[] =3D { > + { > + .name =3D "PEK_DBR", > + .start =3D AXP809_IRQ_PEK_RIS_EDGE, > + .end =3D AXP809_IRQ_PEK_RIS_EDGE, > + .flags =3D IORESOURCE_IRQ, > + }, { > + .name =3D "PEK_DBF", > + .start =3D AXP809_IRQ_PEK_FAL_EDGE, > + .end =3D AXP809_IRQ_PEK_FAL_EDGE, > + .flags =3D IORESOURCE_IRQ, > + }, > +}; > + > static const struct regmap_config axp152_regmap_config =3D { > .reg_bits =3D 8, > .val_bits =3D 8, > @@ -378,6 +394,41 @@ static const struct regmap_irq axp288_regmap_irqs[] = =3D { > INIT_REGMAP_IRQ(AXP288, BC_USB_CHNG, 5, 1), > }; > =20 > +static const struct regmap_irq axp809_regmap_irqs[] =3D { > + INIT_REGMAP_IRQ(AXP809, ACIN_OVER_V, 0, 7), > + INIT_REGMAP_IRQ(AXP809, ACIN_PLUGIN, 0, 6), > + INIT_REGMAP_IRQ(AXP809, ACIN_REMOVAL, 0, 5), > + INIT_REGMAP_IRQ(AXP809, VBUS_OVER_V, 0, 4), > + INIT_REGMAP_IRQ(AXP809, VBUS_PLUGIN, 0, 3), > + INIT_REGMAP_IRQ(AXP809, VBUS_REMOVAL, 0, 2), > + INIT_REGMAP_IRQ(AXP809, VBUS_V_LOW, 0, 1), > + INIT_REGMAP_IRQ(AXP809, BATT_PLUGIN, 1, 7), > + INIT_REGMAP_IRQ(AXP809, BATT_REMOVAL, 1, 6), > + INIT_REGMAP_IRQ(AXP809, BATT_ENT_ACT_MODE, 1, 5), > + INIT_REGMAP_IRQ(AXP809, BATT_EXIT_ACT_MODE, 1, 4), > + INIT_REGMAP_IRQ(AXP809, CHARG, 1, 3), > + INIT_REGMAP_IRQ(AXP809, CHARG_DONE, 1, 2), > + INIT_REGMAP_IRQ(AXP809, BATT_CHG_TEMP_HIGH, 2, 7), > + INIT_REGMAP_IRQ(AXP809, BATT_CHG_TEMP_HIGH_END, 2, 6), > + INIT_REGMAP_IRQ(AXP809, BATT_CHG_TEMP_LOW, 2, 5), > + INIT_REGMAP_IRQ(AXP809, BATT_CHG_TEMP_LOW_END, 2, 4), > + INIT_REGMAP_IRQ(AXP809, BATT_ACT_TEMP_HIGH, 2, 3), > + INIT_REGMAP_IRQ(AXP809, BATT_ACT_TEMP_HIGH_END, 2, 2), > + INIT_REGMAP_IRQ(AXP809, BATT_ACT_TEMP_LOW, 2, 1), > + INIT_REGMAP_IRQ(AXP809, BATT_ACT_TEMP_LOW_END, 2, 0), > + INIT_REGMAP_IRQ(AXP809, DIE_TEMP_HIGH, 3, 7), > + INIT_REGMAP_IRQ(AXP809, LOW_PWR_LVL1, 3, 1), > + INIT_REGMAP_IRQ(AXP809, LOW_PWR_LVL2, 3, 0), > + INIT_REGMAP_IRQ(AXP809, TIMER, 4, 7), > + INIT_REGMAP_IRQ(AXP809, PEK_RIS_EDGE, 4, 6), > + INIT_REGMAP_IRQ(AXP809, PEK_FAL_EDGE, 4, 5), > + INIT_REGMAP_IRQ(AXP809, PEK_SHORT, 4, 4), > + INIT_REGMAP_IRQ(AXP809, PEK_LONG, 4, 3), > + INIT_REGMAP_IRQ(AXP809, PEK_OVER_OFF, 4, 2), > + INIT_REGMAP_IRQ(AXP809, GPIO1_INPUT, 4, 1), > + INIT_REGMAP_IRQ(AXP809, GPIO0_INPUT, 4, 0), > +}; > + > static const struct regmap_irq_chip axp152_regmap_irq_chip =3D { > .name =3D "axp152_irq_chip", > .status_base =3D AXP152_IRQ1_STATE, > @@ -428,6 +479,18 @@ static const struct regmap_irq_chip axp288_regmap_ir= q_chip =3D { > =20 > }; > =20 > +static const struct regmap_irq_chip axp809_regmap_irq_chip =3D { > + .name =3D "axp809", > + .status_base =3D AXP20X_IRQ1_STATE, > + .ack_base =3D AXP20X_IRQ1_STATE, > + .mask_base =3D AXP20X_IRQ1_EN, > + .mask_invert =3D true, > + .init_ack_masked =3D true, > + .irqs =3D axp809_regmap_irqs, > + .num_irqs =3D ARRAY_SIZE(axp809_regmap_irqs), > + .num_regs =3D 5, > +}; > + > static struct mfd_cell axp20x_cells[] =3D { > { > .name =3D "axp20x-pek", > @@ -572,6 +635,16 @@ static struct mfd_cell axp288_cells[] =3D { > }, > }; > =20 > +static struct mfd_cell axp809_cells[] =3D { > + { > + .name =3D "axp20x-pek", > + .num_resources =3D ARRAY_SIZE(axp809_pek_resources), > + .resources =3D axp809_pek_resources, > + }, { > + .name =3D "axp20x-regulator", > + }, > +}; > + > static struct axp20x_dev *axp20x_pm_power_off; > static void axp20x_power_off(void) > { > @@ -631,6 +704,12 @@ int axp20x_match_device(struct axp20x_dev *axp20x) > axp20x->regmap_cfg =3D &axp288_regmap_config; > axp20x->regmap_irq_chip =3D &axp288_regmap_irq_chip; > break; > + case AXP809_ID: > + axp20x->nr_cells =3D ARRAY_SIZE(axp809_cells); > + axp20x->cells =3D axp809_cells; > + axp20x->regmap_cfg =3D &axp22x_regmap_config; > + axp20x->regmap_irq_chip =3D &axp809_regmap_irq_chip; > + break; > default: > dev_err(dev, "unsupported AXP20X ID %lu\n", axp20x->variant); > return -EINVAL; > diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h > index d82e7d51372b..0be4982f08fe 100644 > --- a/include/linux/mfd/axp20x.h > +++ b/include/linux/mfd/axp20x.h > @@ -20,6 +20,7 @@ enum { > AXP221_ID, > AXP223_ID, > AXP288_ID, > + AXP809_ID, > NR_AXP20X_VARIANTS, > }; > =20 > @@ -264,6 +265,29 @@ enum { > AXP22X_REG_ID_MAX, > }; > =20 > +enum { > + AXP809_DCDC1 =3D 0, > + AXP809_DCDC2, > + AXP809_DCDC3, > + AXP809_DCDC4, > + AXP809_DCDC5, > + AXP809_DC1SW, > + AXP809_DC5LDO, > + AXP809_ALDO1, > + AXP809_ALDO2, > + AXP809_ALDO3, > + AXP809_ELDO1, > + AXP809_ELDO2, > + AXP809_ELDO3, > + AXP809_DLDO1, > + AXP809_DLDO2, > + AXP809_RTC_LDO, > + AXP809_LDO_IO0, > + AXP809_LDO_IO1, > + AXP809_SW, > + AXP809_REG_ID_MAX, > +}; > + > /* IRQs */ > enum { > AXP152_IRQ_LDO0IN_CONNECT =3D 1, > @@ -390,6 +414,41 @@ enum axp288_irqs { > AXP288_IRQ_BC_USB_CHNG, > }; > =20 > +enum axp809_irqs { > + AXP809_IRQ_ACIN_OVER_V =3D 1, > + AXP809_IRQ_ACIN_PLUGIN, > + AXP809_IRQ_ACIN_REMOVAL, > + AXP809_IRQ_VBUS_OVER_V, > + AXP809_IRQ_VBUS_PLUGIN, > + AXP809_IRQ_VBUS_REMOVAL, > + AXP809_IRQ_VBUS_V_LOW, > + AXP809_IRQ_BATT_PLUGIN, > + AXP809_IRQ_BATT_REMOVAL, > + AXP809_IRQ_BATT_ENT_ACT_MODE, > + AXP809_IRQ_BATT_EXIT_ACT_MODE, > + AXP809_IRQ_CHARG, > + AXP809_IRQ_CHARG_DONE, > + AXP809_IRQ_BATT_CHG_TEMP_HIGH, > + AXP809_IRQ_BATT_CHG_TEMP_HIGH_END, > + AXP809_IRQ_BATT_CHG_TEMP_LOW, > + AXP809_IRQ_BATT_CHG_TEMP_LOW_END, > + AXP809_IRQ_BATT_ACT_TEMP_HIGH, > + AXP809_IRQ_BATT_ACT_TEMP_HIGH_END, > + AXP809_IRQ_BATT_ACT_TEMP_LOW, > + AXP809_IRQ_BATT_ACT_TEMP_LOW_END, > + AXP809_IRQ_DIE_TEMP_HIGH, > + AXP809_IRQ_LOW_PWR_LVL1, > + AXP809_IRQ_LOW_PWR_LVL2, > + AXP809_IRQ_TIMER, > + AXP809_IRQ_PEK_RIS_EDGE, > + AXP809_IRQ_PEK_FAL_EDGE, > + AXP809_IRQ_PEK_SHORT, > + AXP809_IRQ_PEK_LONG, > + AXP809_IRQ_PEK_OVER_OFF, > + AXP809_IRQ_GPIO1_INPUT, > + AXP809_IRQ_GPIO0_INPUT, > +}; > + > #define AXP288_TS_ADC_H 0x58 > #define AXP288_TS_ADC_L 0x59 > #define AXP288_GP_ADC_H 0x5a --=20 Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org =E2=94=82 Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog --=20 You received this message because you are subscribed to the Google Groups "= linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an e= mail to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org For more options, visit https://groups.google.com/d/optout.