[RESEND PATCH v3 1/2] devicetree: mfd: Add binding for the TI LM3533

[RESEND PATCH v3 1/2] devicetree: mfd: Add binding for the TI LM3533

[Bjorn Andersson]

From: Bjorn Andersson <bjorn.andersson@sonymobile.com>

Add the binding for the Texas Instruments LM3533 lighting power
solution.

Acked-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
Changes since v2:
- Included and changed unit in various dt properties
- Fix compilation issue with !CONFIG_OF

Changes since v1:
- Added units to bost-freq and als resistance

 Documentation/devicetree/bindings/mfd/lm3533.txt | 184 +++++++++++++++++++++++
 1 file changed, 184 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/lm3533.txt

diff --git a/Documentation/devicetree/bindings/mfd/lm3533.txt b/Documentation/devicetree/bindings/mfd/lm3533.txt
new file mode 100644
index 000000000000..d4b43602a382
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/lm3533.txt
@@ -0,0 +1,184 @@
+Texas Instruments LM3533 binding
+
+This binding describes the Texas Instruments LM3533, a lighting power solution
+for smartphone handsets. The common properties are described directly in the
+node, while each individual component are described in an optional subnode.
+
+- compatible:
+	Usage: required
+	Value type: <stringlist>
+	Definition: must be:
+		    "ti,lm3533"
+
+- reg:
+	Usage: required
+	Value type: <u32>
+	Definition: i2c address of the LM3533 chip
+
+- als-supply:
+	Usage: optional
+	Value type: <prop-encoded-array>
+	Definition: reference to regulator powering the V_als input; as
+		    specified in "../regulator/regulator.txt"
+
+- hwen-gpios:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: reference to gpio pin connected to the HWEN input; as
+		    specified in "../gpio/gpio.txt"
+
+- ti,boost-freq-hz:
+	Usage: required
+	Value type: <u32>
+	Definition: switch-frequency of the boost converter, must be either:
+		    500000 or 1000000
+
+- ti,boost-ovp-mv:
+	Usage: required
+	Value type: <u32>
+	Definition: over-voltage protection limit, in mV. Must be one of:
+		    16000, 24000, 32000 or 40000
+
+- #address-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: must be 1
+
+- #size-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: must be 0
+
+= ALS SUBNODE
+The ambient light sensor subnode must be named "als", it carries the light
+sensor related properties.
+
+- ti,als-resistance-ohm:
+	Usage: required (unless ti,pwm-mode is specified)
+	Value type: <u32>
+	Definition: specifies the resistor value (R_als), in Ohm. Valid values
+		    ranges from 200000 to 1574 Ohm.
+
+- ti,pwm-mode:
+	Usage: optional
+	Value type: <empty>
+	Definition: specifies, if present, that the als should operate in PWM
+		    mode - rather than analog mode
+
+= BACKLIGHT NODES
+Backlight subnodes must be named "backlight", they carry the backlight related
+properties.
+
+- reg:
+	Usage: required
+	Value type: <u32>
+	Definition: specifies which of the two backlights this node corresponds
+		    to
+
+- default-brightness:
+	Usage: optional
+	Value type: <32>
+	Definition: specifies the default brightness for the backlight, in
+		    units of brightness [0-255]
+
+- label:
+	Usage: required
+	Value type: <string>
+	Definition: specifies a name of this backlight
+
+- led-max-microamp:
+	Usage: required
+	Value type: <u32>
+	Definition: specifies the max current for this backlight, in uA, as
+		    described in "../leds/common.txt"
+
+- ti,pwm-zones:
+	Usage: optional
+	Value type: <u32 list>
+	Definition: lists the ALS zones to be PWM controlled for this backlight,
+		    the values in the list are in the range [0 - 4]
+
+= LED NODES
+LED subnodes must be named "led", they carry the LED related properties.
+
+- reg:
+	Usage: required
+	Value type: <u32>
+	Definition: specifies which of the four LEDs this node corresponds to
+
+- linux,default-trigger:
+	Usage: optional
+	Value type: <string>
+	Definition: specifies the default trigger for the LED, as described in
+		    "../leds/common.txt"
+
+- label:
+	Usage: required
+	Value type: <string>
+	Definition: specifies a name of this LED, as described in
+		    "../leds/common.txt"
+
+- led-max-microamp:
+	Usage: required
+	Value type: <u32>
+	Definition: specifies the max current for this LED, in uA, as described
+		    in "../leds/common.txt"
+
+- ti,pwm-zones:
+	Usage: optional
+	Value type: <u32 list>
+	Definition: lists the ALS zones to be PWM controlled for this LED, the
+		    values in the list are in the range [0 - 4]
+
+= EXAMPLE
+
+i2c@12460000 {
+	compatible = "qcom,i2c-qup-v1.1.1";
+	...
+
+	lm3533@36 {
+		compatible = "ti,lm3533";
+		reg = <0x36>;
+
+		als-supply = <&pm8921_l11>;
+		hwen-gpios = <&pm8921_gpio 26 GPIO_ACTIVE_HIGH>;
+
+		ti,boost-freq-hz = <500000>;
+		ti,boost-ovp-mv = <24000>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		als {
+			ti,als-resistance-ohm = <200000>;
+		};
+
+		backlight@0 {
+			reg = <0>;
+			label = "backlight";
+
+			led-max-microamp = <20200>;
+		};
+
+		led@0 {
+			reg = <0>;
+			label = "red";
+
+			led-max-microamp = <5000>;
+		};
+
+		led@1 {
+			reg = <1>;
+			label = "green";
+
+			led-max-microamp = <5000>;
+		};
+
+		led@2 {
+			reg = <2>;
+			label = "blue";
+
+			led-max-microamp = <5000>;
+		};
+	};
+
-- 
2.5.0

[RESEND PATCH v3 2/2] mfd: lm3533: Support initialization from Device Tree

[Bjorn Andersson]

From: Bjorn Andersson <bjorn.andersson-/MT0OVThwyLZJqsBc5GL+g@public.gmane.org>

Implement Device Tree parsing functions to support initialization of the
lm3533 drivers.

Signed-off-by: Bjorn Andersson <bjorn.andersson-/MT0OVThwyLZJqsBc5GL+g@public.gmane.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
Changes since v2:
- Drop vendor prefix of vendor properties
- Specify unit of various properties
- Fix reference paths

Changes since v1:
- Added unit to boost-freq and als-resistance (as the frequency now comes with
  a unit specifier I changed it to be expressed in kHz)

 drivers/mfd/lm3533-core.c | 264 ++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 264 insertions(+)

diff --git a/drivers/mfd/lm3533-core.c b/drivers/mfd/lm3533-core.c
index 5abcbb2e8849..dbf26d86fe85 100644
--- a/drivers/mfd/lm3533-core.c
+++ b/drivers/mfd/lm3533-core.c
@@ -18,6 +18,7 @@
 #include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/mfd/core.h>
+#include <linux/of_gpio.h>
 #include <linux/regmap.h>
 #include <linux/seq_file.h>
 #include <linux/slab.h>
@@ -25,6 +26,7 @@
 
 #include <linux/mfd/lm3533.h>
 
+#define LM3533_DEFAULT_BRIGHTNESS	200
 
 #define LM3533_BOOST_OVP_MASK		0x06
 #define LM3533_BOOST_OVP_SHIFT		1
@@ -588,10 +590,266 @@ static const struct regmap_config regmap_config = {
 	.precious_reg	= lm3533_precious_register,
 };
 
+static int lm3533_of_parse_enum(struct device_node *node,
+				const char *propname,
+				const unsigned *match, size_t num_matches)
+{
+	size_t i;
+	int ret;
+	u32 val;
+
+	ret = of_property_read_u32(node, propname, &val);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < num_matches; i++) {
+		if (val == match[i])
+			return i;
+	}
+
+	return -EINVAL;
+}
+
+static int lm3533_of_parse_pwm_zones(struct device_node *node)
+{
+	const char *propname = "ti,pwm-zones";
+	u32 zones[5];
+	int count;
+	int ret;
+	int i;
+
+	count = of_property_count_u32_elems(node, propname);
+	if (count == -EINVAL)
+		return 0;
+	if (count <= 0)
+		return count;
+	if (count >= ARRAY_SIZE(zones))
+		return -EINVAL;
+
+	ret = of_property_read_u32_array(node, propname, zones, count);
+	if (ret < 0)
+		return ret;
+
+	/* Enable pwm input, and enable the selected zones */
+	ret = BIT(0);
+	for (i = 0; i < count; i++)
+		ret |= BIT(zones[i] + 1);
+
+	return ret;
+}
+
+static int lm3533_of_parse_als_node(struct device *dev,
+				    struct device_node *node,
+				    struct lm3533_platform_data *pdata)
+{
+	struct lm3533_als_platform_data *als_pdata;
+	int ret;
+	u32 val;
+
+	als_pdata = devm_kzalloc(dev,
+				 sizeof(struct lm3533_als_platform_data),
+				 GFP_KERNEL);
+	if (!als_pdata)
+		return -ENOMEM;
+
+	als_pdata->pwm_mode = of_property_read_bool(node, "ti,pwm-mode");
+
+	ret = of_property_read_u32(node, "ti,als-resistance-ohm", &val);
+	if (ret < 0 && ret != -EINVAL) {
+		dev_err(dev, "unable to read ti,als-resistance-ohm");
+		return ret;
+	}
+
+	/* Leave at high-Z, if the property was omitted or specified as 0 */
+	if (!ret && val != 0)
+		als_pdata->r_select = 200000 / val;
+
+	pdata->als = als_pdata;
+
+	return 0;
+}
+
+static int lm3533_of_parse_bl_node(struct device *dev,
+				   struct device_node *node,
+				   struct lm3533_platform_data *pdata)
+{
+	struct lm3533_bl_platform_data *bl_pdata;
+	int ret;
+	u32 reg;
+	u32 val;
+
+	ret = of_property_read_u32(node, "reg", &reg);
+	if (ret < 0 || reg >= ARRAY_SIZE(lm3533_bl_devs)) {
+		dev_err(dev, "invalid reg property\n");
+		return ret;
+	}
+
+	bl_pdata = &pdata->backlights[reg];
+
+	/* Increment num_backlights if we're filling a new space */
+	if (reg + 1 > pdata->num_backlights)
+		pdata->num_backlights = reg + 1;
+
+	ret = of_property_read_string(node, "label",
+				      (const char **)&bl_pdata->name);
+	if (ret < 0) {
+		dev_err(dev, "unable to parse label\n");
+		return ret;
+	}
+
+	ret = of_property_read_u32(node, "led-max-microamp", &val);
+	if (ret < 0) {
+		dev_err(dev, "unable to parse led-max-microamp\n");
+		return ret;
+	}
+	bl_pdata->max_current = val;
+
+	val = LM3533_DEFAULT_BRIGHTNESS;
+	ret = of_property_read_u32(node, "default-brightness", &val);
+	if (ret < 0 && ret != -EINVAL) {
+		dev_err(dev, "unable to parse default-brightness\n");
+		return ret;
+	}
+	bl_pdata->default_brightness = val;
+
+	ret = lm3533_of_parse_pwm_zones(node);
+	if (ret < 0) {
+		dev_err(dev, "failed to parse ti,pwm-zones\n");
+		return ret;
+	}
+	bl_pdata->pwm = ret;
+
+	return 0;
+}
+
+static int lm3533_of_parse_led_node(struct device *dev,
+				    struct device_node *node,
+				    struct lm3533_platform_data *pdata)
+{
+	struct lm3533_led_platform_data *led_pdata;
+	int ret;
+	u32 reg;
+	u32 val;
+
+	ret = of_property_read_u32(node, "reg", &reg);
+	if (ret < 0 || reg >= ARRAY_SIZE(lm3533_led_devs)) {
+		dev_err(dev, "invalid reg property\n");
+		return ret;
+	}
+
+	led_pdata = &pdata->leds[reg];
+
+	/* Increment num_leds if we're filling a new space */
+	if (reg + 1 > pdata->num_leds)
+		pdata->num_leds = reg + 1;
+
+	ret = of_property_read_string(node, "label",
+				      (const char **)&led_pdata->name);
+	if (ret < 0) {
+		dev_err(dev, "unable to parse label\n");
+		return ret;
+	}
+
+	ret = of_property_read_u32(node, "led-max-microamp", &val);
+	if (ret < 0) {
+		dev_err(dev, "unable to parse led-max-microamp\n");
+		return ret;
+	}
+	led_pdata->max_current = val;
+
+	ret = of_property_read_string(node, "linux,default-trigger",
+				      &led_pdata->default_trigger);
+	if (ret < 0 && ret != -EINVAL) {
+		dev_err(dev, "unable to parse default-trigger\n");
+		return ret;
+	}
+
+	ret = lm3533_of_parse_pwm_zones(node);
+	if (ret < 0) {
+		dev_err(dev, "failed to parse ti,pwm-zones\n");
+		return ret;
+	}
+	led_pdata->pwm = ret;
+
+	return 0;
+}
+
+static int lm3533_pdata_from_of_node(struct device *dev)
+{
+	struct lm3533_platform_data *pdata;
+	struct device_node *node;
+	int ret;
+	const unsigned freqs[] = {
+		[LM3533_BOOST_FREQ_500KHZ] = 500000,
+		[LM3533_BOOST_FREQ_1000KHZ] = 1000000,
+	};
+	const unsigned ovps[] = {
+		[LM3533_BOOST_OVP_16V] = 16000,
+		[LM3533_BOOST_OVP_24V] = 24000,
+		[LM3533_BOOST_OVP_32V] = 32000,
+		[LM3533_BOOST_OVP_40V] = 40000,
+	};
+
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	pdata->backlights = devm_kcalloc(dev,
+					 ARRAY_SIZE(lm3533_bl_devs),
+					 sizeof(struct lm3533_bl_platform_data),
+					 GFP_KERNEL);
+	if (!pdata->backlights)
+		return -ENOMEM;
+
+	pdata->leds = devm_kcalloc(dev,
+				   ARRAY_SIZE(lm3533_led_devs),
+				   sizeof(struct lm3533_led_platform_data),
+				   GFP_KERNEL);
+	if (!pdata->leds)
+		return -ENOMEM;
+
+	pdata->gpio_hwen = of_get_named_gpio(dev->of_node, "hwen-gpios", 0);
+	if (pdata->gpio_hwen < 0)
+		return pdata->gpio_hwen;
+
+	ret = lm3533_of_parse_enum(dev->of_node, "ti,boost-freq-hz", freqs, 2);
+	if (ret < 0) {
+		dev_err(dev, "failed to parse ti,boost-freq-hz\n");
+		return ret;
+	}
+	pdata->boost_freq = ret;
+
+	ret = lm3533_of_parse_enum(dev->of_node, "ti,boost-ovp-mv", ovps, 4);
+	if (ret < 0) {
+		dev_err(dev, "failed to parse ti,boost-ovp-mv\n");
+		return ret;
+	}
+	pdata->boost_ovp = ret;
+
+	for_each_child_of_node(dev->of_node, node) {
+		if (!strcmp(node->name, "als"))
+			ret = lm3533_of_parse_als_node(dev, node, pdata);
+		else if (!strcmp(node->name, "backlight"))
+			ret = lm3533_of_parse_bl_node(dev, node, pdata);
+		else if (!strcmp(node->name, "led"))
+			ret = lm3533_of_parse_led_node(dev, node, pdata);
+
+		if (ret < 0) {
+			of_node_put(node);
+			return ret;
+		}
+	}
+
+	dev->platform_data = pdata;
+
+	return 0;
+}
+
 static int lm3533_i2c_probe(struct i2c_client *i2c,
 					const struct i2c_device_id *id)
 {
 	struct lm3533 *lm3533;
+	int ret;
 
 	dev_dbg(&i2c->dev, "%s\n", __func__);
 
@@ -608,6 +866,12 @@ static int lm3533_i2c_probe(struct i2c_client *i2c,
 	lm3533->dev = &i2c->dev;
 	lm3533->irq = i2c->irq;
 
+	if (i2c->dev.of_node) {
+		ret = lm3533_pdata_from_of_node(lm3533->dev);
+		if (ret < 0)
+			return ret;
+	}
+
 	return lm3533_device_init(lm3533);
 }
 
-- 
2.5.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [RESEND PATCH v3 2/2] mfd: lm3533: Support initialization from Device Tree

[Lee Jones]

On Wed, 30 Mar 2016, Bjorn Andersson wrote:

> From: Bjorn Andersson <bjorn.andersson-/MT0OVThwyLZJqsBc5GL+g@public.gmane.org>
> 
> Implement Device Tree parsing functions to support initialization of the
> lm3533 drivers.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson-/MT0OVThwyLZJqsBc5GL+g@public.gmane.org>
> Signed-off-by: Bjorn Andersson <bjorn.andersson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> ---
> Changes since v2:
> - Drop vendor prefix of vendor properties
> - Specify unit of various properties
> - Fix reference paths
> 
> Changes since v1:
> - Added unit to boost-freq and als-resistance (as the frequency now comes with
>   a unit specifier I changed it to be expressed in kHz)
> 
>  drivers/mfd/lm3533-core.c | 264 ++++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 264 insertions(+)
> 
> diff --git a/drivers/mfd/lm3533-core.c b/drivers/mfd/lm3533-core.c
> index 5abcbb2e8849..dbf26d86fe85 100644
> --- a/drivers/mfd/lm3533-core.c
> +++ b/drivers/mfd/lm3533-core.c
> @@ -18,6 +18,7 @@
>  #include <linux/gpio.h>
>  #include <linux/i2c.h>
>  #include <linux/mfd/core.h>
> +#include <linux/of_gpio.h>
>  #include <linux/regmap.h>
>  #include <linux/seq_file.h>
>  #include <linux/slab.h>
> @@ -25,6 +26,7 @@
>  
>  #include <linux/mfd/lm3533.h>
>  
> +#define LM3533_DEFAULT_BRIGHTNESS	200

The MFD doesn't care about child specifics.  These needs to go into
the child driver.

>  #define LM3533_BOOST_OVP_MASK		0x06
>  #define LM3533_BOOST_OVP_SHIFT		1
> @@ -588,10 +590,266 @@ static const struct regmap_config regmap_config = {
>  	.precious_reg	= lm3533_precious_register,
>  };
>  
> +static int lm3533_of_parse_enum(struct device_node *node,
> +				const char *propname,
> +				const unsigned *match, size_t num_matches)
> +{
> +	size_t i;
> +	int ret;
> +	u32 val;
> +
> +	ret = of_property_read_u32(node, propname, &val);
> +	if (ret < 0)
> +		return ret;
> +
> +	for (i = 0; i < num_matches; i++) {
> +		if (val == match[i])
> +			return i;
> +	}
> +
> +	return -EINVAL;
> +}
> +
> +static int lm3533_of_parse_pwm_zones(struct device_node *node)
> +{
> +	const char *propname = "ti,pwm-zones";
> +	u32 zones[5];
> +	int count;
> +	int ret;
> +	int i;
> +
> +	count = of_property_count_u32_elems(node, propname);
> +	if (count == -EINVAL)
> +		return 0;
> +	if (count <= 0)
> +		return count;
> +	if (count >= ARRAY_SIZE(zones))
> +		return -EINVAL;
> +
> +	ret = of_property_read_u32_array(node, propname, zones, count);
> +	if (ret < 0)
> +		return ret;
> +
> +	/* Enable pwm input, and enable the selected zones */
> +	ret = BIT(0);
> +	for (i = 0; i < count; i++)
> +		ret |= BIT(zones[i] + 1);
> +
> +	return ret;
> +}

Move to PWM driver.

> +static int lm3533_of_parse_als_node(struct device *dev,
> +				    struct device_node *node,
> +				    struct lm3533_platform_data *pdata)
> +{
> +	struct lm3533_als_platform_data *als_pdata;
> +	int ret;
> +	u32 val;
> +
> +	als_pdata = devm_kzalloc(dev,
> +				 sizeof(struct lm3533_als_platform_data),
> +				 GFP_KERNEL);
> +	if (!als_pdata)
> +		return -ENOMEM;
> +
> +	als_pdata->pwm_mode = of_property_read_bool(node, "ti,pwm-mode");
> +
> +	ret = of_property_read_u32(node, "ti,als-resistance-ohm", &val);
> +	if (ret < 0 && ret != -EINVAL) {
> +		dev_err(dev, "unable to read ti,als-resistance-ohm");
> +		return ret;
> +	}
> +
> +	/* Leave at high-Z, if the property was omitted or specified as 0 */
> +	if (!ret && val != 0)
> +		als_pdata->r_select = 200000 / val;
> +
> +	pdata->als = als_pdata;
> +
> +	return 0;
> +}

Move to wherever the ALS driver is.

> +static int lm3533_of_parse_bl_node(struct device *dev,
> +				   struct device_node *node,
> +				   struct lm3533_platform_data *pdata)
> +{
> +	struct lm3533_bl_platform_data *bl_pdata;
> +	int ret;
> +	u32 reg;
> +	u32 val;
> +
> +	ret = of_property_read_u32(node, "reg", &reg);
> +	if (ret < 0 || reg >= ARRAY_SIZE(lm3533_bl_devs)) {
> +		dev_err(dev, "invalid reg property\n");
> +		return ret;
> +	}
> +
> +	bl_pdata = &pdata->backlights[reg];
> +
> +	/* Increment num_backlights if we're filling a new space */
> +	if (reg + 1 > pdata->num_backlights)
> +		pdata->num_backlights = reg + 1;
> +
> +	ret = of_property_read_string(node, "label",
> +				      (const char **)&bl_pdata->name);
> +	if (ret < 0) {
> +		dev_err(dev, "unable to parse label\n");
> +		return ret;
> +	}
> +
> +	ret = of_property_read_u32(node, "led-max-microamp", &val);
> +	if (ret < 0) {
> +		dev_err(dev, "unable to parse led-max-microamp\n");
> +		return ret;
> +	}
> +	bl_pdata->max_current = val;
> +
> +	val = LM3533_DEFAULT_BRIGHTNESS;
> +	ret = of_property_read_u32(node, "default-brightness", &val);
> +	if (ret < 0 && ret != -EINVAL) {
> +		dev_err(dev, "unable to parse default-brightness\n");
> +		return ret;
> +	}
> +	bl_pdata->default_brightness = val;
> +
> +	ret = lm3533_of_parse_pwm_zones(node);
> +	if (ret < 0) {
> +		dev_err(dev, "failed to parse ti,pwm-zones\n");
> +		return ret;
> +	}
> +	bl_pdata->pwm = ret;
> +
> +	return 0;
> +}

Move to the Backlight driver.

> +static int lm3533_of_parse_led_node(struct device *dev,
> +				    struct device_node *node,
> +				    struct lm3533_platform_data *pdata)
> +{
> +	struct lm3533_led_platform_data *led_pdata;
> +	int ret;
> +	u32 reg;
> +	u32 val;
> +
> +	ret = of_property_read_u32(node, "reg", &reg);
> +	if (ret < 0 || reg >= ARRAY_SIZE(lm3533_led_devs)) {
> +		dev_err(dev, "invalid reg property\n");
> +		return ret;
> +	}
> +
> +	led_pdata = &pdata->leds[reg];
> +
> +	/* Increment num_leds if we're filling a new space */
> +	if (reg + 1 > pdata->num_leds)
> +		pdata->num_leds = reg + 1;
> +
> +	ret = of_property_read_string(node, "label",
> +				      (const char **)&led_pdata->name);
> +	if (ret < 0) {
> +		dev_err(dev, "unable to parse label\n");
> +		return ret;
> +	}
> +
> +	ret = of_property_read_u32(node, "led-max-microamp", &val);
> +	if (ret < 0) {
> +		dev_err(dev, "unable to parse led-max-microamp\n");
> +		return ret;
> +	}
> +	led_pdata->max_current = val;
> +
> +	ret = of_property_read_string(node, "linux,default-trigger",
> +				      &led_pdata->default_trigger);
> +	if (ret < 0 && ret != -EINVAL) {
> +		dev_err(dev, "unable to parse default-trigger\n");
> +		return ret;
> +	}
> +
> +	ret = lm3533_of_parse_pwm_zones(node);
> +	if (ret < 0) {
> +		dev_err(dev, "failed to parse ti,pwm-zones\n");
> +		return ret;
> +	}
> +	led_pdata->pwm = ret;
> +
> +	return 0;
> +}

Move to LED driver.

> +static int lm3533_pdata_from_of_node(struct device *dev)
> +{
> +	struct lm3533_platform_data *pdata;
> +	struct device_node *node;
> +	int ret;
> +	const unsigned freqs[] = {
> +		[LM3533_BOOST_FREQ_500KHZ] = 500000,
> +		[LM3533_BOOST_FREQ_1000KHZ] = 1000000,
> +	};
> +	const unsigned ovps[] = {
> +		[LM3533_BOOST_OVP_16V] = 16000,
> +		[LM3533_BOOST_OVP_24V] = 24000,
> +		[LM3533_BOOST_OVP_32V] = 32000,
> +		[LM3533_BOOST_OVP_40V] = 40000,
> +	};
> +
> +	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
> +	if (!pdata)
> +		return -ENOMEM;
> +
> +	pdata->backlights = devm_kcalloc(dev,
> +					 ARRAY_SIZE(lm3533_bl_devs),
> +					 sizeof(struct lm3533_bl_platform_data),
> +					 GFP_KERNEL);
> +	if (!pdata->backlights)
> +		return -ENOMEM;

These needs to go into the Backlight driver.

> +	pdata->leds = devm_kcalloc(dev,
> +				   ARRAY_SIZE(lm3533_led_devs),
> +				   sizeof(struct lm3533_led_platform_data),
> +				   GFP_KERNEL);
> +	if (!pdata->leds)
> +		return -ENOMEM;

This needs to go into the LED driver.

> +	pdata->gpio_hwen = of_get_named_gpio(dev->of_node, "hwen-gpios", 0);
> +	if (pdata->gpio_hwen < 0)
> +		return pdata->gpio_hwen;
> +
> +	ret = lm3533_of_parse_enum(dev->of_node, "ti,boost-freq-hz", freqs, 2);
> +	if (ret < 0) {
> +		dev_err(dev, "failed to parse ti,boost-freq-hz\n");
> +		return ret;
> +	}

I'm not a big fan of this abstraction method, but at the very least
you should place the error message into the function.

> +	pdata->boost_freq = ret;
> +
> +	ret = lm3533_of_parse_enum(dev->of_node, "ti,boost-ovp-mv", ovps, 4);
> +	if (ret < 0) {
> +		dev_err(dev, "failed to parse ti,boost-ovp-mv\n");
> +		return ret;
> +	}
> +	pdata->boost_ovp = ret;
> +
> +	for_each_child_of_node(dev->of_node, node) {

The MFD driver shouldn't have to care what child nodes are present.
Just regiser them as devices in their own right via mfd_add_devices()
or of_platform_populate.

> +		if (!strcmp(node->name, "als"))
> +			ret = lm3533_of_parse_als_node(dev, node, pdata);
> +		else if (!strcmp(node->name, "backlight"))
> +			ret = lm3533_of_parse_bl_node(dev, node, pdata);
> +		else if (!strcmp(node->name, "led"))
> +			ret = lm3533_of_parse_led_node(dev, node, pdata);
> +
> +		if (ret < 0) {
> +			of_node_put(node);
> +			return ret;
> +		}
> +	}
> +
> +	dev->platform_data = pdata;
> +
> +	return 0;
> +}
> +
>  static int lm3533_i2c_probe(struct i2c_client *i2c,
>  					const struct i2c_device_id *id)
>  {
>  	struct lm3533 *lm3533;
> +	int ret;
>  
>  	dev_dbg(&i2c->dev, "%s\n", __func__);
>  
> @@ -608,6 +866,12 @@ static int lm3533_i2c_probe(struct i2c_client *i2c,
>  	lm3533->dev = &i2c->dev;
>  	lm3533->irq = i2c->irq;
>  
> +	if (i2c->dev.of_node) {
> +		ret = lm3533_pdata_from_of_node(lm3533->dev);
> +		if (ret < 0)
> +			return ret;
> +	}
> +
>  	return lm3533_device_init(lm3533);
>  }
>  

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [RESEND PATCH v3 2/2] mfd: lm3533: Support initialization from Device Tree

[Bjorn Andersson]

On Mon 11 Apr 05:30 PDT 2016, Lee Jones wrote:

> On Wed, 30 Mar 2016, Bjorn Andersson wrote:
> 
> > From: Bjorn Andersson <bjorn.andersson@sonymobile.com>
> > 
> > Implement Device Tree parsing functions to support initialization of the
> > lm3533 drivers.
> > 
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> > ---
> > Changes since v2:
> > - Drop vendor prefix of vendor properties
> > - Specify unit of various properties
> > - Fix reference paths
> > 
> > Changes since v1:
> > - Added unit to boost-freq and als-resistance (as the frequency now comes with
> >   a unit specifier I changed it to be expressed in kHz)
> > 
> >  drivers/mfd/lm3533-core.c | 264 ++++++++++++++++++++++++++++++++++++++++++++++
> >  1 file changed, 264 insertions(+)
> > 
> > diff --git a/drivers/mfd/lm3533-core.c b/drivers/mfd/lm3533-core.c
> > index 5abcbb2e8849..dbf26d86fe85 100644
> > --- a/drivers/mfd/lm3533-core.c
> > +++ b/drivers/mfd/lm3533-core.c
> > @@ -18,6 +18,7 @@
> >  #include <linux/gpio.h>
> >  #include <linux/i2c.h>
> >  #include <linux/mfd/core.h>
> > +#include <linux/of_gpio.h>
> >  #include <linux/regmap.h>
> >  #include <linux/seq_file.h>
> >  #include <linux/slab.h>
> > @@ -25,6 +26,7 @@
> >  
> >  #include <linux/mfd/lm3533.h>
> >  
> > +#define LM3533_DEFAULT_BRIGHTNESS	200
> 
> The MFD doesn't care about child specifics.  These needs to go into
> the child driver.
> 

OK, sounds reasonable. Thanks for your feedback!

Regards,
Bjorn