devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
To: Stuart Yoder <stuart.yoder-3arQi8VN3Tc@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	mark.rutland-5wv7dgnIgG8@public.gmane.org,
	german.rivera-KZfg59tc24xl57MIdRCFDg@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	leoyang.li-3arQi8VN3Tc@public.gmane.org
Subject: Re: [PATCH 2/2] arm64: dts: ls2080a: fsl-mc dt node updates
Date: Wed, 13 Apr 2016 13:50:19 +0800	[thread overview]
Message-ID: <20160413055019.GK28903@tiger> (raw)
In-Reply-To: <1459544080-28598-1-git-send-email-stuart.yoder-3arQi8VN3Tc@public.gmane.org>

On Fri, Apr 01, 2016 at 03:54:40PM -0500, Stuart Yoder wrote:
> From: Stuart Yoder <stuart.yoder-3arQi8VN3Tc@public.gmane.org>
> 
> updates to the fsl-mc node for full functionality:
>    -msi-parent is needed for interrupt support
>    -ranges is needed to enable the bus driver to translate bus addresses
>    -dpmac nodes provide a basis for relating dpmac objects to PHYs
> 
> Signed-off-by: Stuart Yoder <stuart.yoder-3arQi8VN3Tc@public.gmane.org>
> ---
>  arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi |   87 ++++++++++++++++++++++++
>  1 file changed, 87 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
> index 9d746c6..449c635 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
> @@ -265,6 +265,93 @@
>  			compatible = "fsl,qoriq-mc";
>  			reg = <0x00000008 0x0c000000 0 0x40>,	 /* MC portal base */
>  			      <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
> +			msi-parent = <&its>;
> +			#address-cells = <3>;
> +			#size-cells = <1>;
> +
> +			/*
> +			 * Region type 0x0 - MC portals
> +			 * Region type 0x1 - QBMAN portals
> +			 */
> +			ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000
> +				  0x1 0x0 0x0 0x8 0x18000000 0x8000000>;
> +
> +			/*
> +			 * Define the maximum number of MACs present on the SoC.
> +			 * They won't necessarily be all probed, since the
> +			 * Data Path Layout file and the MC firmware can put
> +			 * fewer actual DPMAC objects on the MC bus.
> +			 */
> +			dpmacs {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				dpmac1: dpmac@1 {
> +					compatible = "fsl,qoriq-mc-dpmac";

I did not see how this compatible is used by kernel driver.

> +					reg = <1>;
> +				};

Please have a newline between nodes.

Shawn

> +				dpmac2: dpmac@2 {
> +					compatible = "fsl,qoriq-mc-dpmac";
> +					reg = <2>;
> +				};
> +				dpmac3: dpmac@3 {
> +					compatible = "fsl,qoriq-mc-dpmac";
> +					reg = <3>;
> +				};
> +				dpmac4: dpmac@4 {
> +					compatible = "fsl,qoriq-mc-dpmac";
> +					reg = <4>;
> +				};
> +				dpmac5: dpmac@5 {
> +					compatible = "fsl,qoriq-mc-dpmac";
> +					reg = <5>;
> +				};
> +				dpmac6: dpmac@6 {
> +					compatible = "fsl,qoriq-mc-dpmac";
> +					reg = <6>;
> +				};
> +				dpmac7: dpmac@7 {
> +					compatible = "fsl,qoriq-mc-dpmac";
> +					reg = <7>;
> +				};
> +				dpmac8: dpmac@8 {
> +					compatible = "fsl,qoriq-mc-dpmac";
> +					reg = <8>;
> +				};
> +				dpmac9: dpmac@9 {
> +					compatible = "fsl,qoriq-mc-dpmac";
> +					reg = <9>;
> +				};
> +				dpmac10: dpmac@10 {
> +					compatible = "fsl,qoriq-mc-dpmac";
> +					reg = <0xa>;
> +				};
> +				dpmac11: dpmac@11 {
> +					compatible = "fsl,qoriq-mc-dpmac";
> +					reg = <0xb>;
> +				};
> +				dpmac12: dpmac@12 {
> +					compatible = "fsl,qoriq-mc-dpmac";
> +					reg = <0xc>;
> +				};
> +				dpmac13: dpmac@13 {
> +					compatible = "fsl,qoriq-mc-dpmac";
> +					reg = <0xd>;
> +				};
> +				dpmac14: dpmac@14 {
> +					compatible = "fsl,qoriq-mc-dpmac";
> +					reg = <0xe>;
> +				};
> +				dpmac15: dpmac@15 {
> +					compatible = "fsl,qoriq-mc-dpmac";
> +					reg = <0xf>;
> +				};
> +				dpmac16: dpmac@16 {
> +					compatible = "fsl,qoriq-mc-dpmac";
> +					reg = <0x10>;
> +				};
> +			};
> +
>  		};
>  
>  		smmu: iommu@5000000 {
> -- 
> 1.7.9.5
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2016-04-13  5:50 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-04-01 20:54 [PATCH 2/2] arm64: dts: ls2080a: fsl-mc dt node updates Stuart Yoder
     [not found] ` <1459544080-28598-1-git-send-email-stuart.yoder-3arQi8VN3Tc@public.gmane.org>
2016-04-13  5:50   ` Shawn Guo [this message]
2016-04-13 20:39     ` Stuart Yoder
2016-04-18  2:02       ` Shawn Guo
2016-04-18  2:30         ` Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160413055019.GK28903@tiger \
    --to=shawnguo-dgejt+ai2ygdnm+yrofe0a@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=german.rivera-KZfg59tc24xl57MIdRCFDg@public.gmane.org \
    --cc=leoyang.li-3arQi8VN3Tc@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=stuart.yoder-3arQi8VN3Tc@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).