* [PATCH] ARM: dts: omap3-n900: Specify peripherals LDO regulators initial mode @ 2016-04-16 6:37 Ivaylo Dimitrov 2016-04-17 0:05 ` Sebastian Reichel 0 siblings, 1 reply; 9+ messages in thread From: Ivaylo Dimitrov @ 2016-04-16 6:37 UTC (permalink / raw) To: tony, bcousson Cc: robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, linux, linux-omap, devicetree, linux-arm-kernel, linux-kernel, Ivaylo Dimitrov Without that, regulators are left in the mode last set by the bootloader or by the kernel the device was rebooted from. This leads to various problems like non-working peripherals. Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> --- arch/arm/boot/dts/omap3-n900.dts | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index b3c26a9..1bb36e2 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -329,6 +329,7 @@ regulator-name = "V28"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; + regulator-initial-mode = <0x0e>; regulator-always-on; /* due to battery cover sensor */ }; @@ -336,30 +337,35 @@ regulator-name = "VCSI"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-initial-mode = <0x0e>; }; &vaux3 { regulator-name = "VMMC2_30"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <3000000>; + regulator-initial-mode = <0x0e>; }; &vaux4 { regulator-name = "VCAM_ANA_28"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; + regulator-initial-mode = <0x0e>; }; &vmmc1 { regulator-name = "VMMC1"; regulator-min-microvolt = <1850000>; regulator-max-microvolt = <3150000>; + regulator-initial-mode = <0x0e>; }; &vmmc2 { regulator-name = "V28_A"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <3000000>; + regulator-initial-mode = <0x0e>; regulator-always-on; /* due VIO leak to AIC34 VDDs */ }; @@ -367,6 +373,7 @@ regulator-name = "VPLL"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-initial-mode = <0x0e>; regulator-always-on; }; @@ -374,6 +381,7 @@ regulator-name = "VSDI_CSI"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-initial-mode = <0x0e>; regulator-always-on; }; @@ -381,6 +389,7 @@ regulator-name = "VMMC2_IO_18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-initial-mode = <0x0e>; }; &vio { -- 1.9.1 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH] ARM: dts: omap3-n900: Specify peripherals LDO regulators initial mode 2016-04-16 6:37 [PATCH] ARM: dts: omap3-n900: Specify peripherals LDO regulators initial mode Ivaylo Dimitrov @ 2016-04-17 0:05 ` Sebastian Reichel 2016-04-17 6:14 ` Ivaylo Dimitrov 0 siblings, 1 reply; 9+ messages in thread From: Sebastian Reichel @ 2016-04-17 0:05 UTC (permalink / raw) To: Ivaylo Dimitrov Cc: tony, bcousson, robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, linux, linux-omap, devicetree, linux-arm-kernel, linux-kernel [-- Attachment #1: Type: text/plain, Size: 1083 bytes --] Hi Ivo, On Sat, Apr 16, 2016 at 09:37:23AM +0300, Ivaylo Dimitrov wrote: > Without that, regulators are left in the mode last set by the bootloader or > by the kernel the device was rebooted from. This leads to various problems > like non-working peripherals. > > Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> > --- > arch/arm/boot/dts/omap3-n900.dts | 9 +++++++++ > 1 file changed, 9 insertions(+) > > diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts > index b3c26a9..1bb36e2 100644 > --- a/arch/arm/boot/dts/omap3-n900.dts > +++ b/arch/arm/boot/dts/omap3-n900.dts > @@ -329,6 +329,7 @@ > regulator-name = "V28"; > regulator-min-microvolt = <2800000>; > regulator-max-microvolt = <2800000>; > + regulator-initial-mode = <0x0e>; > regulator-always-on; /* due to battery cover sensor */ > }; I think this should either get an additional comment like /* MODE_NORMAL */ or implemented using a define and a TWL4030_REGULATOR_MODE_NORMAL constant to keep the *.dts easily readable. -- Sebastian [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 819 bytes --] ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] ARM: dts: omap3-n900: Specify peripherals LDO regulators initial mode 2016-04-17 0:05 ` Sebastian Reichel @ 2016-04-17 6:14 ` Ivaylo Dimitrov [not found] ` <571329B0.9060503-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 0 siblings, 1 reply; 9+ messages in thread From: Ivaylo Dimitrov @ 2016-04-17 6:14 UTC (permalink / raw) To: Sebastian Reichel Cc: tony, bcousson, robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, linux, linux-omap, devicetree, linux-arm-kernel, linux-kernel On 17.04.2016 03:05, Sebastian Reichel wrote: > Hi Ivo, > > On Sat, Apr 16, 2016 at 09:37:23AM +0300, Ivaylo Dimitrov wrote: >> Without that, regulators are left in the mode last set by the bootloader or >> by the kernel the device was rebooted from. This leads to various problems >> like non-working peripherals. >> >> Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> >> --- >> arch/arm/boot/dts/omap3-n900.dts | 9 +++++++++ >> 1 file changed, 9 insertions(+) >> >> diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts >> index b3c26a9..1bb36e2 100644 >> --- a/arch/arm/boot/dts/omap3-n900.dts >> +++ b/arch/arm/boot/dts/omap3-n900.dts >> @@ -329,6 +329,7 @@ >> regulator-name = "V28"; >> regulator-min-microvolt = <2800000>; >> regulator-max-microvolt = <2800000>; >> + regulator-initial-mode = <0x0e>; >> regulator-always-on; /* due to battery cover sensor */ >> }; > > I think this should either get an additional > comment like /* MODE_NORMAL */ or implemented According to the TRM, this is 'ACTIVE state', but that does not fit in the regulator framework terminology. > using a define and a TWL4030_REGULATOR_MODE_NORMAL > constant to keep the *.dts easily readable. We already have RES_STATE_ACTIVE defined in linux/i2c/twl.h, is there a way to include that in a dts? Ivo ^ permalink raw reply [flat|nested] 9+ messages in thread
[parent not found: <571329B0.9060503-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]
* Re: [PATCH] ARM: dts: omap3-n900: Specify peripherals LDO regulators initial mode [not found] ` <571329B0.9060503-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> @ 2016-04-17 12:29 ` Sebastian Reichel 2016-04-17 14:29 ` [PATCH v1] " Ivaylo Dimitrov 0 siblings, 1 reply; 9+ messages in thread From: Sebastian Reichel @ 2016-04-17 12:29 UTC (permalink / raw) To: Ivaylo Dimitrov Cc: tony-4v6yS6AI5VpBDgjK7y7TUQ, bcousson-rdvid1DuHRBWk0Htik3J/w, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, pawel.moll-5wv7dgnIgG8, mark.rutland-5wv7dgnIgG8, ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg, galak-sgV2jX0FEOL9JmXXK+q4OQ, linux-lFZ/pmaqli7XmaaqVzeoHQ, linux-omap-u79uwXL29TY76Z2rM5mHXA, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-kernel-u79uwXL29TY76Z2rM5mHXA [-- Attachment #1: Type: text/plain, Size: 2007 bytes --] Hi, On Sun, Apr 17, 2016 at 09:14:08AM +0300, Ivaylo Dimitrov wrote: > On 17.04.2016 03:05, Sebastian Reichel wrote: > >On Sat, Apr 16, 2016 at 09:37:23AM +0300, Ivaylo Dimitrov wrote: > >>Without that, regulators are left in the mode last set by the bootloader or > >>by the kernel the device was rebooted from. This leads to various problems > >>like non-working peripherals. > >> > >>Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > >>--- > >> arch/arm/boot/dts/omap3-n900.dts | 9 +++++++++ > >> 1 file changed, 9 insertions(+) > >> > >>diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts > >>index b3c26a9..1bb36e2 100644 > >>--- a/arch/arm/boot/dts/omap3-n900.dts > >>+++ b/arch/arm/boot/dts/omap3-n900.dts > >>@@ -329,6 +329,7 @@ > >> regulator-name = "V28"; > >> regulator-min-microvolt = <2800000>; > >> regulator-max-microvolt = <2800000>; > >>+ regulator-initial-mode = <0x0e>; > >> regulator-always-on; /* due to battery cover sensor */ > >> }; > > > >I think this should either get an additional > >comment like /* MODE_NORMAL */ or implemented > > According to the TRM, this is 'ACTIVE state', but that does not fit in the > regulator framework terminology. No problem with using STATE_ACTIVE or any other fitting description. IMHO that "active" is misleading for regulators without "always-on/boot-on" tag, but that was TI's decision. > >using a define and a TWL4030_REGULATOR_MODE_NORMAL > >constant to keep the *.dts easily readable. > > We already have RES_STATE_ACTIVE defined in linux/i2c/twl.h, is there a way > to include that in a dts? Not in its current state. During kernel build the C preprocessor is applied on the *.dts files. So the header may only contain preprocessor macros (e.g. #define). For that solution something like ~/src/linux/include/dt-bindings/regulator/maxim,max77802.h should be created for the twl regulator. -- Sebastian [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 819 bytes --] ^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v1] ARM: dts: omap3-n900: Specify peripherals LDO regulators initial mode 2016-04-17 12:29 ` Sebastian Reichel @ 2016-04-17 14:29 ` Ivaylo Dimitrov 2016-04-18 5:11 ` Sebastian Reichel ` (2 more replies) 0 siblings, 3 replies; 9+ messages in thread From: Ivaylo Dimitrov @ 2016-04-17 14:29 UTC (permalink / raw) To: tony, bcousson Cc: robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, linux, linux-omap, devicetree, linux-arm-kernel, linux-kernel, sre, Ivaylo Dimitrov Without that, regulators are left in the mode last set by the bootloader or by the kernel the device was rebooted from. This leads to various problems, like non-working peripherals. Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> --- arch/arm/boot/dts/omap3-n900.dts | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index b3c26a9..d9e2d9c 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -329,6 +329,7 @@ regulator-name = "V28"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ regulator-always-on; /* due to battery cover sensor */ }; @@ -336,30 +337,35 @@ regulator-name = "VCSI"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ }; &vaux3 { regulator-name = "VMMC2_30"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <3000000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ }; &vaux4 { regulator-name = "VCAM_ANA_28"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ }; &vmmc1 { regulator-name = "VMMC1"; regulator-min-microvolt = <1850000>; regulator-max-microvolt = <3150000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ }; &vmmc2 { regulator-name = "V28_A"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <3000000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ regulator-always-on; /* due VIO leak to AIC34 VDDs */ }; @@ -367,6 +373,7 @@ regulator-name = "VPLL"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ regulator-always-on; }; @@ -374,6 +381,7 @@ regulator-name = "VSDI_CSI"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ regulator-always-on; }; @@ -381,6 +389,7 @@ regulator-name = "VMMC2_IO_18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ }; &vio { -- 1.9.1 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH v1] ARM: dts: omap3-n900: Specify peripherals LDO regulators initial mode 2016-04-17 14:29 ` [PATCH v1] " Ivaylo Dimitrov @ 2016-04-18 5:11 ` Sebastian Reichel [not found] ` <1460903363-2197-1-git-send-email-ivo.g.dimitrov.75-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 2016-04-24 10:08 ` Pavel Machek 2 siblings, 0 replies; 9+ messages in thread From: Sebastian Reichel @ 2016-04-18 5:11 UTC (permalink / raw) To: Ivaylo Dimitrov Cc: tony, bcousson, robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, linux, linux-omap, devicetree, linux-arm-kernel, linux-kernel [-- Attachment #1: Type: text/plain, Size: 399 bytes --] Hi, On Sun, Apr 17, 2016 at 05:29:23PM +0300, Ivaylo Dimitrov wrote: > Without that, regulators are left in the mode last set by the bootloader or > by the kernel the device was rebooted from. This leads to various problems, > like non-working peripherals. > > Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Reviewed-By: Sebastian Reichel <sre@kernel.org> -- Sebastian [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 819 bytes --] ^ permalink raw reply [flat|nested] 9+ messages in thread
[parent not found: <1460903363-2197-1-git-send-email-ivo.g.dimitrov.75-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]
* Re: [PATCH v1] ARM: dts: omap3-n900: Specify peripherals LDO regulators initial mode [not found] ` <1460903363-2197-1-git-send-email-ivo.g.dimitrov.75-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> @ 2016-04-19 21:18 ` Javier Martinez Canillas 0 siblings, 0 replies; 9+ messages in thread From: Javier Martinez Canillas @ 2016-04-19 21:18 UTC (permalink / raw) To: Ivaylo Dimitrov Cc: Tony Lindgren, Benoit Cousson, Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Russell King, linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, Linux Kernel, Sebastian Reichel Hello Ivaylo, On Sun, Apr 17, 2016 at 10:29 AM, Ivaylo Dimitrov <ivo.g.dimitrov.75-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote: > Without that, regulators are left in the mode last set by the bootloader or > by the kernel the device was rebooted from. This leads to various problems, > like non-working peripherals. > > Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > --- > arch/arm/boot/dts/omap3-n900.dts | 9 +++++++++ > 1 file changed, 9 insertions(+) > > diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts > index b3c26a9..d9e2d9c 100644 > --- a/arch/arm/boot/dts/omap3-n900.dts > +++ b/arch/arm/boot/dts/omap3-n900.dts > @@ -329,6 +329,7 @@ > regulator-name = "V28"; > regulator-min-microvolt = <2800000>; > regulator-max-microvolt = <2800000>; > + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ As Sebastian said, it would be nice if instead of magic numbers + comments, we have defines for the modes by moving the definitions from include/linux/i2c/twl.h to include/dt-bindings/regulator/ so they can be used by DTS. But that can be done as a follow-up though, to avoid adding a dependency between the regulator and arm-soc subsystems to get this fix applied. Reviewed-by: Javier Martinez Canillas <javier-JPH+aEBZ4P+UEJcrhfAQsw@public.gmane.org> Best regards, Javier -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v1] ARM: dts: omap3-n900: Specify peripherals LDO regulators initial mode 2016-04-17 14:29 ` [PATCH v1] " Ivaylo Dimitrov 2016-04-18 5:11 ` Sebastian Reichel [not found] ` <1460903363-2197-1-git-send-email-ivo.g.dimitrov.75-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> @ 2016-04-24 10:08 ` Pavel Machek 2016-04-26 17:14 ` Tony Lindgren 2 siblings, 1 reply; 9+ messages in thread From: Pavel Machek @ 2016-04-24 10:08 UTC (permalink / raw) To: Ivaylo Dimitrov Cc: tony, bcousson, robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, linux, linux-omap, devicetree, linux-arm-kernel, linux-kernel, sre On Sun 2016-04-17 17:29:23, Ivaylo Dimitrov wrote: > Without that, regulators are left in the mode last set by the bootloader or > by the kernel the device was rebooted from. This leads to various problems, > like non-working peripherals. > > Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Reviewed-by: Pavel Machek <pavel@ucw.cz> > --- a/arch/arm/boot/dts/omap3-n900.dts > +++ b/arch/arm/boot/dts/omap3-n900.dts > @@ -329,6 +329,7 @@ > regulator-name = "V28"; > regulator-min-microvolt = <2800000>; > regulator-max-microvolt = <2800000>; > + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ > regulator-always-on; /* due to battery cover sensor */ > }; > -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v1] ARM: dts: omap3-n900: Specify peripherals LDO regulators initial mode 2016-04-24 10:08 ` Pavel Machek @ 2016-04-26 17:14 ` Tony Lindgren 0 siblings, 0 replies; 9+ messages in thread From: Tony Lindgren @ 2016-04-26 17:14 UTC (permalink / raw) To: Pavel Machek Cc: Ivaylo Dimitrov, bcousson-rdvid1DuHRBWk0Htik3J/w, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, pawel.moll-5wv7dgnIgG8, mark.rutland-5wv7dgnIgG8, ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg, galak-sgV2jX0FEOL9JmXXK+q4OQ, linux-lFZ/pmaqli7XmaaqVzeoHQ, linux-omap-u79uwXL29TY76Z2rM5mHXA, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-kernel-u79uwXL29TY76Z2rM5mHXA, sre-DgEjT+Ai2ygdnm+yROfE0A * Pavel Machek <pavel-+ZI9xUNit7I@public.gmane.org> [160424 03:09]: > On Sun 2016-04-17 17:29:23, Ivaylo Dimitrov wrote: > > Without that, regulators are left in the mode last set by the bootloader or > > by the kernel the device was rebooted from. This leads to various problems, > > like non-working peripherals. > > > > Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > > Reviewed-by: Pavel Machek <pavel-+ZI9xUNit7I@public.gmane.org> Thanks applying into omap-for-v4.6/fixes-rc5. Tony -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2016-04-26 17:14 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-04-16 6:37 [PATCH] ARM: dts: omap3-n900: Specify peripherals LDO regulators initial mode Ivaylo Dimitrov
2016-04-17 0:05 ` Sebastian Reichel
2016-04-17 6:14 ` Ivaylo Dimitrov
[not found] ` <571329B0.9060503-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-04-17 12:29 ` Sebastian Reichel
2016-04-17 14:29 ` [PATCH v1] " Ivaylo Dimitrov
2016-04-18 5:11 ` Sebastian Reichel
[not found] ` <1460903363-2197-1-git-send-email-ivo.g.dimitrov.75-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-04-19 21:18 ` Javier Martinez Canillas
2016-04-24 10:08 ` Pavel Machek
2016-04-26 17:14 ` Tony Lindgren
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).