[PATCH] arm64: dts: uniphier: add /memreserve/ for spin-table release address

[PATCH] arm64: dts: uniphier: add /memreserve/ for spin-table release address

[Masahiro Yamada]

As Documentation/arm64/booting.txt says, the cpu-release-addr
location should be reserved.

Signed-off-by: Masahiro Yamada <yamada.masahiro-uWyLwvC0a2jby3iVrkZq2A@public.gmane.org>
---

 arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi
index 651c9d9..90909d2 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi
@@ -42,6 +42,8 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
+/memreserve/ 0x80000100 0x00000008;
+
 / {
 	compatible = "socionext,ph1-ld20";
 	#address-cells = <2>;
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH] arm64: dts: uniphier: add /memreserve/ for spin-table release address

[Mark Rutland]

On Sat, Apr 16, 2016 at 02:58:58AM +0900, Masahiro Yamada wrote:
> As Documentation/arm64/booting.txt says, the cpu-release-addr
> location should be reserved.
> 
> Signed-off-by: Masahiro Yamada <yamada.masahiro-uWyLwvC0a2jby3iVrkZq2A@public.gmane.org>
> ---
> 
>  arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi
> index 651c9d9..90909d2 100644
> --- a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi
> +++ b/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi
> @@ -42,6 +42,8 @@
>   *     OTHER DEALINGS IN THE SOFTWARE.
>   */
>  
> +/memreserve/ 0x80000100 0x00000008;
> +

Please add a comment above the memreserve to mention what it is
protecting. That helps to avoid having this cargo-culted to cases where
it is not needed.

I take it that the code for the spin-table is not in RAM, and does not
need to be protected similarly?

Assuming so:

Acked-by: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>

Thanks,
Mark.

>  / {
>  	compatible = "socionext,ph1-ld20";
>  	#address-cells = <2>;
> -- 
> 1.9.1
> 
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH] arm64: dts: uniphier: add /memreserve/ for spin-table release address

[Masahiro Yamada]

Hi Mark,


2016-04-18 17:45 GMT+09:00 Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>:
> On Sat, Apr 16, 2016 at 02:58:58AM +0900, Masahiro Yamada wrote:
>> As Documentation/arm64/booting.txt says, the cpu-release-addr
>> location should be reserved.
>>
>> Signed-off-by: Masahiro Yamada <yamada.masahiro-uWyLwvC0a2jby3iVrkZq2A@public.gmane.org>
>> ---
>>
>>  arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi | 2 ++
>>  1 file changed, 2 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi
>> index 651c9d9..90909d2 100644
>> --- a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi
>> +++ b/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi
>> @@ -42,6 +42,8 @@
>>   *     OTHER DEALINGS IN THE SOFTWARE.
>>   */
>>
>> +/memreserve/ 0x80000100 0x00000008;
>> +
>
> Please add a comment above the memreserve to mention what it is
> protecting. That helps to avoid having this cargo-culted to cases where
> it is not needed.

OK, will do.


> I take it that the code for the spin-table is not in RAM, and does not
> need to be protected similarly?


I use U-Boot to boot Linux for this board.

The code for the spin-table is on SDRAM, and not protected.

I already recognize this problem.

The difficulty for U-Boot is that
U-Boot relocates itself to the top of the DRAM.
So, it is difficult to predict
where the code will be placed.

I will discuss this issue in the U-Boot ML.


So, My current solution is
pre-fetch the code for the spin-table onto I-cache.



-- 
Best Regards
Masahiro Yamada
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH] arm64: dts: uniphier: add /memreserve/ for spin-table release address

[Mark Rutland]

On Mon, Apr 18, 2016 at 05:55:14PM +0900, Masahiro Yamada wrote:
> 2016-04-18 17:45 GMT+09:00 Mark Rutland <mark.rutland@arm.com>:
> > I take it that the code for the spin-table is not in RAM, and does not
> > need to be protected similarly?
> 
> I use U-Boot to boot Linux for this board.
> 
> The code for the spin-table is on SDRAM, and not protected.
> 
> I already recognize this problem.
> 
> The difficulty for U-Boot is that
> U-Boot relocates itself to the top of the DRAM.
> So, it is difficult to predict
> where the code will be placed.
> 
> I will discuss this issue in the U-Boot ML.

Ok, please do.

> So, My current solution is pre-fetch the code for the spin-table onto
> I-cache.

As you are probably aware, this is incredibly unsafe, and very likely to
go wrong. Nothing guarantees that (stale) entries remain in the I-cache.

I would very much advise fixing this ASAP.

Thanks,
Mark.