Re: [PATCH v2 1/2] Documentation: DT: vdma: Add clock support for vdma

["Sören Brinkmann" <soren.brinkmann-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>]

On Wed, 2016-04-20 at 17:13:18 +0530, Kedareswara rao Appana wrote:
> This patch updates the binding doc with clock description
> for vdma.
> 
> Signed-off-by: Kedareswara rao Appana <appanad-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>
> ---
> Changes for v2:
> --> Listed down all the clocks supported by the h/w
>     as suggested by the Datta.
> --> Used IP clock names instead of shortcut clock names.
> 
>  Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt
> index fcc2b65..afe9eb7 100644
> --- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt
> +++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt
> @@ -21,6 +21,11 @@ Required properties:
>  - dma-channel child node: Should have at least one channel and can have up to
>  	two channels per device. This node specifies the properties of each
>  	DMA channel (see child node properties below).
> +- clocks: Input clock specifier. Refer to common clock bindings.
> +- clock-names: List of input clocks "s_axi_lite_aclk", "m_axi_mm2s_aclk"
> +	       "m_axi_s2mm_aclk", "m_axis_mm2s_aclk", "s_axis_s2mm_aclk"
> +	       (list of input cloks may vary based on the ip configuration.

s/cloks/clocks

Acked-by: Sören Brinkmann <soren.brinkmann-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>

	Sören
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html