* [PATCH v2 2/2] dt-bindings: Add Oxford Semiconductor OXNAS Standard Clocks bindings
[not found] <1460973696-5977-1-git-send-email-narmstrong@baylibre.com>
@ 2016-04-18 10:01 ` Neil Armstrong
2016-04-21 21:20 ` Stephen Boyd
0 siblings, 1 reply; 2+ messages in thread
From: Neil Armstrong @ 2016-04-18 10:01 UTC (permalink / raw)
To: linux-kernel, linux-arm-kernel, linux-clk, sboyd, devicetree
Cc: Neil Armstrong
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
.../devicetree/bindings/clock/oxnas,stdclk.txt | 35 ++++++++++++++++++++++
1 file changed, 35 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/oxnas,stdclk.txt
diff --git a/Documentation/devicetree/bindings/clock/oxnas,stdclk.txt b/Documentation/devicetree/bindings/clock/oxnas,stdclk.txt
new file mode 100644
index 0000000..208cca6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/oxnas,stdclk.txt
@@ -0,0 +1,35 @@
+Oxford Semiconductor OXNAS SoC Family Standard Clocks
+================================================
+
+Please also refer to clock-bindings.txt in this directory for common clock
+bindings usage.
+
+Required properties:
+- compatible: Should be "oxsemi,ox810se-stdclk"
+- #clock-cells: 1, see below
+
+Parent node should have the following properties :
+- compatible: Should be "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd"
+
+For OX810SE, the clock indices are :
+ - 0: LEON
+ - 1: DMA_SGDMA
+ - 2: CIPHER
+ - 3: SATA
+ - 4: AUDIO
+ - 5: USBMPH
+ - 6: ETHA
+ - 7: PCIA
+ - 8: NAND
+
+example:
+
+sys: sys-ctrl@000000 {
+ compatible = "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd";
+ reg = <0x000000 0x100000>;
+
+ stdclk: stdclk {
+ compatible = "oxsemi,ox810se-stdclk";
+ #clock-cells = <1>;
+ };
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 2+ messages in thread