Re: [PATCH 12/41] Documentation: dt: input: fix spelling mistakes

[Rob Herring <robh@kernel.org>]

On Mon, Apr 25, 2016 at 01:24:09AM +0100, Eric Engestrom wrote:
> Signed-off-by: Eric Engestrom <eric@engestrom.ch>

Applied, thanks.

Rob

> ---
>  Documentation/devicetree/bindings/input/ads7846.txt                  | 2 +-
>  Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt | 2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/input/ads7846.txt b/Documentation/devicetree/bindings/input/ads7846.txt
> index c6cfe2e..9fc47b0 100644
> --- a/Documentation/devicetree/bindings/input/ads7846.txt
> +++ b/Documentation/devicetree/bindings/input/ads7846.txt
> @@ -29,7 +29,7 @@ Optional properties:
>  	ti,vref-delay-usecs		vref supply delay in usecs, 0 for
>  					external vref (u16).
>  	ti,vref-mv			The VREF voltage, in millivolts (u16).
> -					Set to 0 to use internal refernce
> +					Set to 0 to use internal references
>  					(ADS7846).
>  	ti,keep-vref-on			set to keep vref on for differential
>  					measurements as well
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt b/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt
> index cdf05f9..abfcab3 100644
> --- a/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt
> +++ b/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt
> @@ -15,7 +15,7 @@ Optional properties:
>   - fsl,pen-debounce-ns: Pen debounce time in nanoseconds.
>   - fsl,pen-threshold: Pen-down threshold for the touchscreen. This is a value
>     between 1 and 4096. It is the ratio between the internal reference voltage
> -   and the measured voltage after the plate was precharged. Resistence between
> +   and the measured voltage after the plate was precharged. Resistance between
>     plates and therefore the voltage decreases with pressure so that a smaller
>     value is equivalent to a higher pressure.
>   - fsl,settling-time-ns: Settling time in nanoseconds. The settling time is before
> -- 
> 2.8.0
>