* [PATCHv3] ARM: dts: sunxi: Add a olinuxino-lime2-emmc
@ 2016-05-04 13:17 Olliver Schinagl
[not found] ` <1462367853-29912-1-git-send-email-oliver-dxLnbx3+1qmEVqv0pETR8A@public.gmane.org>
0 siblings, 1 reply; 2+ messages in thread
From: Olliver Schinagl @ 2016-05-04 13:17 UTC (permalink / raw)
To: Maxime Ripard, Chen-Yu Tsai, Tsvetan Usunov, Rob Herring,
Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Russell King,
Hans de Goede
Cc: info-kyXcfZUBQGPQT0dZR+AlfA, dev-3kdeTeqwOZ9EV1b7eY7vFQ,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Olliver Schinagl
There are 3 kinds of OLinuXino Lime2 boards.
One without any on board storage, one with NAND storage and one with
eMMC storage. This patch adds the eMMC variant of boards.
eMMC storage is different from a regular SD card in that it is soldered
on the board and cannot be changed. Additionally, it shares pins with
the NAND module and with the second SPI port.
Signed-off-by: Olliver Schinagl <oliver-dxLnbx3+1qmEVqv0pETR8A@public.gmane.org>
---
.../boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts | 81 ++++++++++++++++++++++
1 file changed, 81 insertions(+)
create mode 100644 arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts
new file mode 100644
index 0000000..9680fcb
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts
@@ -0,0 +1,81 @@
+ /*
+ * Copyright 2015 - Ultimaker B.V.
+ * Author Olliver Schinagl <oliver-dxLnbx3+1qmEVqv0pETR8A@public.gmane.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun7i-a20-olinuxino-lime2.dts"
+
+/ {
+ model = "Olimex A20-OLinuXino-LIME2-eMMC";
+
+ mmc2_pwrseq: pwrseq {
+ pinctrl-0 = <&mmc2_pins_nrst>;
+ pinctrl-names = "default";
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&pio {
+ mmc2_pins_nrst: mmc2@0 {
+ allwinner,pins = "PC16";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins_a>;
+ vmmc-supply = <®_vcc3v3>;
+ vqmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ non-removable;
+ mmc-pwrseq = <&mmc2_pwrseq>;
+ status = "okay";
+
+ emmc: emmc@0 {
+ reg = <0>;
+ compatible = "mmc-card";
+ broken-hpi;
+ };
+};
--
2.8.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCHv3] ARM: dts: sunxi: Add a olinuxino-lime2-emmc
[not found] ` <1462367853-29912-1-git-send-email-oliver-dxLnbx3+1qmEVqv0pETR8A@public.gmane.org>
@ 2016-05-04 18:35 ` Maxime Ripard
0 siblings, 0 replies; 2+ messages in thread
From: Maxime Ripard @ 2016-05-04 18:35 UTC (permalink / raw)
To: Olliver Schinagl
Cc: Chen-Yu Tsai, Tsvetan Usunov, Rob Herring, Pawel Moll,
Mark Rutland, Ian Campbell, Kumar Gala, Russell King,
Hans de Goede, info-kyXcfZUBQGPQT0dZR+AlfA,
dev-3kdeTeqwOZ9EV1b7eY7vFQ, devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: Type: text/plain, Size: 3551 bytes --]
On Wed, May 04, 2016 at 03:17:33PM +0200, Olliver Schinagl wrote:
> There are 3 kinds of OLinuXino Lime2 boards.
> One without any on board storage, one with NAND storage and one with
> eMMC storage. This patch adds the eMMC variant of boards.
>
> eMMC storage is different from a regular SD card in that it is soldered
> on the board and cannot be changed. Additionally, it shares pins with
> the NAND module and with the second SPI port.
>
> Signed-off-by: Olliver Schinagl <oliver-dxLnbx3+1qmEVqv0pETR8A@public.gmane.org>
As a general comment, having a log of the changes helps a lot,
especially when you roll new versions quiclky.
> ---
> .../boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts | 81 ++++++++++++++++++++++
> 1 file changed, 81 insertions(+)
> create mode 100644 arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts
>
> diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts
> new file mode 100644
> index 0000000..9680fcb
> --- /dev/null
> +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts
> @@ -0,0 +1,81 @@
> + /*
> + * Copyright 2015 - Ultimaker B.V.
> + * Author Olliver Schinagl <oliver-dxLnbx3+1qmEVqv0pETR8A@public.gmane.org>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +#include "sun7i-a20-olinuxino-lime2.dts"
> +
> +/ {
> + model = "Olimex A20-OLinuXino-LIME2-eMMC";
You should have a compatible here too.
Thanks!
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2016-05-04 18:35 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-05-04 13:17 [PATCHv3] ARM: dts: sunxi: Add a olinuxino-lime2-emmc Olliver Schinagl
[not found] ` <1462367853-29912-1-git-send-email-oliver-dxLnbx3+1qmEVqv0pETR8A@public.gmane.org>
2016-05-04 18:35 ` Maxime Ripard
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).