From: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
To: Nishanth Menon <nm-l0cyMroinI0@public.gmane.org>
Cc: "Peter Ujfalusi" <peter.ujfalusi-l0cyMroinI0@public.gmane.org>,
linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
"Enric Balletbo i Serra"
<eballetbo-VIneJrwqLopBDgjK7y7TUQ@public.gmane.org>,
"Agustí Fontquerni" <af-VIneJrwqLopBDgjK7y7TUQ@public.gmane.org>,
"Eduard Gavin" <egavin-VIneJrwqLopBDgjK7y7TUQ@public.gmane.org>
Subject: Re: [PATCH] ARM: dts: omap5-igep0050: Correct hdmi regulator
Date: Thu, 5 May 2016 11:46:09 -0700 [thread overview]
Message-ID: <20160505184609.GB5995@atomide.com> (raw)
In-Reply-To: <572A38FD.9050801-l0cyMroinI0@public.gmane.org>
* Nishanth Menon <nm-l0cyMroinI0@public.gmane.org> [160504 11:03]:
> On 05/04/2016 12:26 PM, Tony Lindgren wrote:
> > Hi,
> >
> > Adding Nishanth to Cc.
> >
> > * Peter Ujfalusi <peter.ujfalusi-l0cyMroinI0@public.gmane.org> [160429 05:15]:
> >> ldo7_reg, obviously ;)
> >>
> >>> status = "okay";
> >>> regulator-min-microvolt = <1800000>;
> >>> regulator-max-microvolt = <1800000>;
> >>> };
> >
> > It really seems to be ldo7, otherwise there's no HDMI output. I don't
> > have the schematics either.
> >
> > But it seems we have at least two other regressions in Linux next that
> > prevent me from testing this properly:
> >
> > 1. On igepv5, I get this for the MMC regulator
> >
> > ldo9: bypassed regulator has no supply!
> > ldo9: failed to get the current voltage(-517)
> > palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmar
The patch I posted fixes this. Then for the HDMI see below.
I've kept it at 2V like we have in omap5-board-common.dtsi,
I wonder if it really should be 1.8V though for ldo7 in this
case?
Regards,
Tony
8< -----------------
From: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
Date: Thu, 5 May 2016 11:29:23 -0700
Subject: [PATCH] ARM: dts: Fix ldo7 source for HDMI on igepv5
Fix ldo7 source for HDMI on igepv5.
Suggested-by: Peter Ujfalusi <peter.ujfalusi-l0cyMroinI0@public.gmane.org>
Signed-off-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
diff --git a/arch/arm/boot/dts/omap5-igep0050.dts b/arch/arm/boot/dts/omap5-igep0050.dts
index 46ecb1d..72ff6a4 100644
--- a/arch/arm/boot/dts/omap5-igep0050.dts
+++ b/arch/arm/boot/dts/omap5-igep0050.dts
@@ -35,6 +35,12 @@
};
};
+&ldo7_reg {
+ status = "okay";
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+};
+
&omap5_pmx_core {
i2c4_pins: pinmux_i2c4_pins {
pinctrl-single,pins = <
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-05-05 18:46 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-29 10:21 [PATCH] ARM: dts: omap5-igep0050: Correct hdmi regulator Peter Ujfalusi
[not found] ` <1461925297-9734-1-git-send-email-peter.ujfalusi-l0cyMroinI0@public.gmane.org>
2016-04-29 10:22 ` Peter Ujfalusi
[not found] ` <6ee9d67a-e907-715a-f3f5-d90a470314c3-l0cyMroinI0@public.gmane.org>
2016-05-04 17:26 ` Tony Lindgren
2016-05-04 18:01 ` Nishanth Menon
[not found] ` <572A38FD.9050801-l0cyMroinI0@public.gmane.org>
2016-05-05 18:46 ` Tony Lindgren [this message]
2016-05-09 8:25 ` Peter Ujfalusi
2016-05-09 8:34 ` Tomi Valkeinen
[not found] ` <2822D1C2B9B19F4A8261F756A13373F801BEF7B4@DFLE11.ent.ti.com>
[not found] ` <CAPjucKb+4vd8Ar3MATCuTx+9R36PeB0hbvwDaAD1KTZFCiVJEA@mail.gmail.com>
[not found] ` <2822D1C2B9B19F4A8261F756A13373F801BF86D2@DFLE11.ent.ti.com>
[not found] ` <2822D1C2B9B19F4A8261F756A13373F801BF8703@DFLE11.ent.ti.com>
[not found] ` <CAPjucKb2PLSZcD3YZ9xQk1F62ugFaGAkBBqMp5GmoWFd0H8Vfg@mail.gmail.com>
2016-05-12 16:57 ` Tony Lindgren
2016-05-12 19:19 ` Nishanth Menon
2016-05-12 20:26 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160505184609.GB5995@atomide.com \
--to=tony-4v6ys6ai5vpbdgjk7y7tuq@public.gmane.org \
--cc=af-VIneJrwqLopBDgjK7y7TUQ@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=eballetbo-VIneJrwqLopBDgjK7y7TUQ@public.gmane.org \
--cc=egavin-VIneJrwqLopBDgjK7y7TUQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=nm-l0cyMroinI0@public.gmane.org \
--cc=peter.ujfalusi-l0cyMroinI0@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).