Re: [PATCH v8 00/14] USB OTG/dual-role framework

[Peter Chen <hzpeterchen-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]

On Fri, May 13, 2016 at 01:03:14PM +0300, Roger Quadros wrote:
> Hi,
> 
> This series centralizes OTG/Dual-role functionality in the kernel.
> As of now I've got Dual-role functionality working pretty reliably on
> dra7-evm and am437x-gp-evm.
> NOTE: my am437x-gp-evm broke so I couldn't test v8 on it.
> But the changes since v7 are trivial and shouldn't impact am437x-gp-evm.
> 
> DWC3 controller and platform related patches will be sent separately.
> 
> Series is based on v4.6-rc1 and depends on first 2 patches of [1]
> [1] - OTG fsm cleanup - https://lkml.org/lkml/2016/3/30/186
> 
> Why?:
> ----
> 
> Currently there is no central location where OTG/dual-role functionality is
> implemented in the Linux USB stack and every USB controller driver is
> doing their own thing for OTG/dual-role. We can benefit from code-reuse
> and simplicity by adding the OTG/dual-role core driver.
> 
> Newer OTG cores support standard host interface (e.g. xHCI) so
> host and gadget functionality are no longer closely knit like older
> cores. There needs to be a way to co-ordinate the operation of the
> host and gadget controllers in dual-role mode. i.e. to stop and start them
> from a central location. This central location should be the
> USB OTG/dual-role core.
> 
> Host and gadget controllers might be sharing resources and can't
> be always running. One has to be stopped for the other to run.
> This couldn't be done till now but can be done from the OTG core.
> 
> What?:
> -----
> 
> The OTG/dual-role core consists of a set of APIs that allow
> registration of OTG controller device and OTG capable host and gadget
> controllers.
> 
> - The OTG controller driver can provide the OTG capabilities and the
> Finite State Machine work function via 'struct usb_otg_config'
> at the time of registration i.e. usb_otg_register();
> 
> 	struct usb_otg *usb_otg_register(struct device *dev,
>         	                         struct usb_otg_config *config);
> 	int usb_otg_unregister(struct device *dev);
> 	/**
> 	 * struct usb_otg_config - otg controller configuration
> 	 * @caps: otg capabilities of the controller
> 	 * @ops: otg fsm operations
> 	 * @otg_work: optional custom otg state machine work function
> 	 */
> 	struct usb_otg_config {
> 	        struct usb_otg_caps *otg_caps;
> 	        struct otg_fsm_ops *fsm_ops;
> 	        void (*otg_work)(struct work_struct *work);
> 	};
> 
> The dual-role state machine is built-into the OTG core so nothing
> special needs to be provided if only dual-role functionality is desired.
> The low level OTG controller driver ops are povided via
> 'struct otg_fsm_ops *fsm_ops' in the 'struct usb_otg_config'.
> 
> After registration, the OTG core waits for host, gadget controller
> and the gadget function driver to be registered. Once all resources are
> available it instantiates the Finite State Machine (FSM).
> The host/gadget controllers are started/stopped according to the FSM.
> 
> - Host and gadget controllers that are a part of OTG/dual-role port must
> use the OTG core provided APIs to add/remove the host/gadget.
> i.e. hosts must use usb_otg_add_hcd() usb_otg_remove_hcd(),,
> gadgets must use usb_otg_add_gadget_udc() usb_del_gadget_udc().
> This ensures that the host and gadget controllers are not started till
> the state machine is ready and the right bus conditions are met.
> It also allows the host and gadget controllers to provide the OTG
> controller device to link them together. For Device tree boots
> the related OTG controller is automatically picked up via the
> 'otg-controller' property in the Host/Gadget controller nodes.
> 
> 	int usb_otg_add_hcd(struct usb_hcd *hcd,
> 			    unsigned int irqnum, unsigned long irqflags,
> 			    struct device *otg_dev);
> 	void usb_otg_remove_hcd(struct usb_hcd *hcd);
> 
> 	int usb_otg_add_gadget_udc(struct device *parent,
> 				   struct usb_gadget *gadget,
> 				   struct device *otg_dev);
> 	usb_del_gadget_udc() must be used for removal.
> 
> 
> - During the lifetime of the FSM, the OTG controller driver can provide
> inputs event changes using usb_otg_sync_inputs(). The OTG core will
> then schedule the FSM work function (or internal dual-role state machine)
> to update the FSM state. The FSM then calls the OTG controller
> operations (fsm_ops) as necessary.
> 	void usb_otg_sync_inputs(struct usb_otg *otg);
> 
> - The following 2 functions are provided as helpers for use by the
> OTG controller driver to start/stop the host/gadget controllers.
> 	int usb_otg_start_host(struct usb_otg *otg, int on);
> 	int usb_otg_start_gadget(struct usb_otg *otg, int on);
> 
> - The following function is provided for use by the USB host stack
> to sync OTG related events to the OTG state machine.
> e.g. change in host_bus->b_hnp_enable, gadget->b_hnp_enable
> 	int usb_otg_kick_fsm(struct device *otg_device);
> 
> Changelog:
> ---------
> v8:
> - split out start/stop gadget and connect/disconnect operations.
> - make CONFIG_OTG dpend on CONFIG_USB_GADGET as well apart from CONFIG_USB
> - use create_freezable_workqueue() for OTG work as per Peter's suggestion.
> - remove usb-otg.h as we're not initializing any OTG timers.
> - don't include unnecessary headers in usb-otg.c (i.e. hrtimer.h & ktime.h)
> 

Since you have agreed to move CONFIG_USB_OTG out of HCD, I suggest you
can have a folder to put current OTG and OTG_FSM stuffs under the root
of usb folder, it can benefit the user who wants to add their dual-role
switch driver or OTG driver. What do you think?

Peter
> v7:
> - added dual-role support for host controllers requiring a companion
> controller. e.g. EHCI + OHCI.
> - added of_usb_get_otg() to get the OTG controller device
> from the USB controller's device node.
> - addressed review comments.
> 
> v6:
> - added otg specific APIs for host/gadget registration. behaviour of
> original host/gadget API remains unchanged. Platform devices can now
> pass the otg device explicitly while registering host/gadget.
> - moved hcd specific operations from struct otg_fsm to struct hcd_ops.
> - made struct usb_otg mandatory for all otg related APIs.
> - allow otg controller to provide it's own otg_work function so that
> it can implement it's own state machine.
> - removed otg fsm and timers from usb-otg.c. Only dual-role state machine
> is implemented.
> - vbus is controlled in the dual-role state machine.
> - PM runtime is used around drd_statemachine().
> - added otg_dev to xhci platform data to allow platform code to specify
> the otg controller tied to the xhci host controller.
> 
> v5: Internal version. Not sent to mailing list
> 
> v4:
> - Added DT support for tying otg-controller to host and gadget
>  controllers. For DT we no longer have the constraint that
>  OTG controller needs to be parent of host and gadget. They can be
>  tied together using the "otg-controller" property.
> - Relax the requirement for DT case that otg controller must register
>  before host/gadget. We maintain a wait list of host/gadget devices
>  waiting on the otg controller.
> - Use a single struct usb_otg for otg data.
> - Don't override host/gadget start/stop APIs. Let the controller
>  drivers do what they want as they know best. Helper API is provided
>  for controller start/stop that controller driver can use.
> - Introduce struct usb_otg_config to pass the otg capabilities,
>  otg ops and otg timer timeouts during otg controller registration.
> - rebased on Greg's usb.git/usb-next
> 
> v3:
> - all otg related definations now in otg.h
> - single kernel config USB_OTG to enable OTG core and FSM.
> - resolved symbol dependency issues.
> - use dev_vdbg instead of VDBG() in usb-otg-fsm.c
> - rebased on v4.2-rc1
> 
> v2:
> - Use add/remove_hcd() instead of start/stop_hcd() to enable/disable
>  the host controller
> - added dual-role-device (DRD) state machine which is a much simpler
>  mode of operation when compared to OTG. Here we don't support fancy
>  OTG features like HNP, SRP, on the fly role-swap. The mode of operation
>  is determined based on ID pin (cable type) and the role doesn't change
>  till the cable type changes.
> 
> --
> cheers,
> -roger
> 
> Roger Quadros (13):
>   usb: hcd: Initialize hcd->flags to 0
>   usb: otg-fsm: Prevent build warning "VDBG" redefined
>   usb: hcd.h: Add OTG to HCD interface
>   usb: otg-fsm: use usb_otg wherever possible
>   usb: otg-fsm: move host controller operations into usb_otg->hcd_ops
>   usb: gadget.h: Add OTG to gadget interface
>   usb: otg: get rid of CONFIG_USB_OTG_FSM in favour of CONFIG_USB_OTG
>   usb: otg: add OTG/dual-role core
>   usb: of: add an API to get OTG device from USB controller node
>   usb: otg: use dev_dbg() instead of VDBG()
>   usb: hcd: Adapt to OTG core
>   usb: gadget: udc: adapt to OTG core
>   usb: host: xhci-plat: Add otg device to platform data
> 
> Yoshihiro Shimoda (1):
>   usb: otg: add hcd companion support
> 
>  Documentation/devicetree/bindings/usb/generic.txt |    6 +
>  Documentation/usb/chipidea.txt                    |    2 +-
>  drivers/usb/chipidea/Makefile                     |    2 +-
>  drivers/usb/chipidea/ci.h                         |    3 +-
>  drivers/usb/chipidea/core.c                       |   14 +-
>  drivers/usb/chipidea/debug.c                      |    2 +-
>  drivers/usb/chipidea/otg_fsm.c                    |  176 ++--
>  drivers/usb/chipidea/otg_fsm.h                    |    2 +-
>  drivers/usb/chipidea/udc.c                        |   17 +-
>  drivers/usb/common/Makefile                       |    3 +-
>  drivers/usb/common/common.c                       |   27 +
>  drivers/usb/common/usb-otg-fsm.c                  |  203 ++--
>  drivers/usb/common/usb-otg.c                      | 1056 +++++++++++++++++++++
>  drivers/usb/core/Kconfig                          |   12 +-
>  drivers/usb/core/hcd.c                            |   56 ++
>  drivers/usb/gadget/udc/udc-core.c                 |  194 +++-
>  drivers/usb/host/xhci-plat.c                      |   35 +-
>  drivers/usb/phy/Kconfig                           |    2 +-
>  drivers/usb/phy/phy-fsl-usb.c                     |  155 +--
>  drivers/usb/phy/phy-fsl-usb.h                     |    3 +-
>  include/linux/usb/gadget.h                        |   22 +
>  include/linux/usb/hcd.h                           |   29 +
>  include/linux/usb/of.h                            |    9 +
>  include/linux/usb/otg-fsm.h                       |  154 +--
>  include/linux/usb/otg.h                           |  264 +++++-
>  include/linux/usb/xhci_pdriver.h                  |    3 +
>  26 files changed, 2013 insertions(+), 438 deletions(-)
>  create mode 100644 drivers/usb/common/usb-otg.c
> 
> -- 
> 2.7.4
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

-- 

Best Regards,
Peter Chen
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html