Re: [RESEND PATCH 1/3] mtd: nand: Add an option to maximize the ECC strength

[Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>]

On Wed, Jun 08, 2016 at 05:04:22PM +0200, Boris Brezillon wrote:
> The generic NAND DT bindings allows one to tweak the ECC strength and
> step size to their need. It can be used to lower the ECC strength to
> match a bootloader/firmware config, but might also be used to get a better
> reliability.
> 
> In the latter case, the user might want to use the maximum ECC strength
> without having to explicitly calculate the exact value (this value not
> only depends on the OOB size, but also on the NAND controller, and can
> be tricky to extract).
> 
> Add a generic 'nand-ecc-maximize' DT property and the associated
> NAND_ECC_MAXIMIZE flag, to let ECC controller drivers select the best
> ECC strength and step-size on their own.
> 
> Signed-off-by: Boris Brezillon <boris.brezillon-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
> ---
>  Documentation/devicetree/bindings/mtd/nand.txt | 9 +++++++++

Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>

>  drivers/mtd/nand/nand_base.c                   | 3 +++
>  include/linux/mtd/nand.h                       | 1 +
>  3 files changed, 13 insertions(+)
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html