From: Stefan Agner <stefan@agner.ch>
To: wsa@the-dreams.de, mark.rutland@arm.com, arnd@arndb.de,
shawnguo@kernel.org, mpe@ellerman.id.au, paulus@samba.org,
benh@kernel.crashing.org
Cc: scottwood@freescale.com, dinguyen@opensource.altera.com,
robh+dt@kernel.org, pawel.moll@arm.com,
ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
linux-i2c@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, Stefan Agner <stefan@agner.ch>
Subject: [PATCH 1/3] Documentation: dt: i2c: use correct STMicroelectronics vendor prefix
Date: Sun, 26 Jun 2016 02:34:04 -0700 [thread overview]
Message-ID: <20160626093406.26785-1-stefan@agner.ch> (raw)
The documentation currently uses the non-standard vendor prefix stm
and st-micro for STMicroelectronics. The drivers do not specify the
vendor prefixes since the I2C Core strips them away from the DT
provided compatible string. Therefor, changing documentation and
existing device trees does not have any impact on device detection.
Signed-off-by: Stefan Agner <stefan@agner.ch>
---
Hi,
Mark mentioned that issue already once in the past, see:
http://lkml.iu.edu/hypermail/linux/kernel/1309.0/01686.html
Not sure through which trees this patches should flow, I guess
the first through Wolfram's tree, the ARM changes through Arnd
or Shawns tree (mostly Freescale boards are affected), not sure
about the PowerPC changes...
--
Stefan
Documentation/devicetree/bindings/i2c/trivial-devices.txt | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
index 53987449..8db3384 100644
--- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt
+++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
@@ -81,10 +81,10 @@ samsung,24ad0xd1 S524AD0XF1 (128K/256K-bit Serial EEPROM for Low Power)
sgx,vz89x SGX Sensortech VZ89X Sensors
sii,s35390a 2-wire CMOS real-time clock
skyworks,sky81452 Skyworks SKY81452: Six-Channel White LED Driver with Touch Panel Bias Supply
-st-micro,24c256 i2c serial eeprom (24cxx)
-stm,m41t00 Serial Access TIMEKEEPER
-stm,m41t62 Serial real-time clock (RTC) with alarm
-stm,m41t80 M41T80 - SERIAL ACCESS RTC WITH ALARMS
+st,24c256 i2c serial eeprom (24cxx)
+st,m41t00 Serial real-time clock (RTC)
+st,m41t62 Serial real-time clock (RTC) with alarm
+st,m41t80 M41T80 - SERIAL ACCESS RTC WITH ALARMS
taos,tsl2550 Ambient Light Sensor with SMBUS/Two Wire Serial Interface
ti,ads7828 8-Channels, 12-bit ADC
ti,ads7830 8-Channels, 8-bit ADC
--
2.8.3
next reply other threads:[~2016-06-26 9:34 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-26 9:34 Stefan Agner [this message]
2016-06-26 9:34 ` [PATCH 2/3] powerpc/dts: fix STMicroelectronics compatible strings Stefan Agner
2016-06-26 9:34 ` [PATCH 3/3] ARM: dts: " Stefan Agner
2016-06-28 20:56 ` [PATCH 1/3] Documentation: dt: i2c: use correct STMicroelectronics vendor prefix Rob Herring
[not found] ` <20160626093406.26785-1-stefan-XLVq0VzYD2Y@public.gmane.org>
2016-06-28 21:37 ` Wolfram Sang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160626093406.26785-1-stefan@agner.ch \
--to=stefan@agner.ch \
--cc=arnd@arndb.de \
--cc=benh@kernel.crashing.org \
--cc=devicetree@vger.kernel.org \
--cc=dinguyen@opensource.altera.com \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mpe@ellerman.id.au \
--cc=paulus@samba.org \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=scottwood@freescale.com \
--cc=shawnguo@kernel.org \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).