From: Thierry Reding <thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: arm-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org
Cc: Ralf Ramsauer
<ralf-ex4EvEgDZR1o7HI0AxOeTKwczVv4G7md@public.gmane.org>,
Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>,
Alexandre Courbot
<gnurou-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [RESEND PATCH] ARM: tegra: fix erroneous address in dts
Date: Mon, 18 Jul 2016 11:58:02 +0200 [thread overview]
Message-ID: <20160718095802.GA422@ulmo.ba.sec> (raw)
In-Reply-To: <1468835208-13426-1-git-send-email-ralf-ex4EvEgDZR1o7HI0AxOeTKwczVv4G7md@public.gmane.org>
[-- Attachment #1: Type: text/plain, Size: 1970 bytes --]
On Mon, Jul 18, 2016 at 11:46:48AM +0200, Ralf Ramsauer wrote:
> c90bb7b enabled the high speed UARTs of the Jetson TK1. Due to a merge
> quirk, wrong addresses were introduced. Fix it and use the correct
> addresses.
>
> Thierry let me know, that there is another patch (b5896f67ab3c in
> linux-next) in preparation which removes all the '0,' prefixes of unit
> addresses on Tegra124 and is planned to go upstream in 4.8, so
> this patch will get reverted then.
>
> But for the moment, this patch is necessary to fix current misbehaviour.
>
> Fixes: c90bb7b9b9 ("ARM: tegra: Add high speed UARTs to Jetson TK1 device tree")
> Signed-off-by: Ralf Ramsauer <ralf-ex4EvEgDZR1o7HI0AxOeTKwczVv4G7md@public.gmane.org>
> Acked-by: Thierry Reding <thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> Cc: linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> ---
> arch/arm/boot/dts/tegra124-jetson-tk1.dts | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
ARM-SoC maintainers,
Just to clarify, this is targetted at v4.7 because the offending patch
was merged in v4.7-rc1. If at all possible it'd be great to get this in,
even if this is terribly last minute.
Thanks,
Thierry
>
> diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
> index 941f362..f4d8125 100644
> --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
> +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
> @@ -1386,7 +1386,7 @@
> * Pin 41: BR_UART1_TXD
> * Pin 44: BR_UART1_RXD
> */
> - serial@70006000 {
> + serial@0,70006000 {
> compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
> status = "okay";
> };
> @@ -1398,7 +1398,7 @@
> * Pin 71: UART2_CTS_L
> * Pin 74: UART2_RTS_L
> */
> - serial@70006040 {
> + serial@0,70006040 {
> compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
> status = "okay";
> };
> --
> 2.7.3
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
next prev parent reply other threads:[~2016-07-18 9:58 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-18 9:46 [RESEND PATCH] ARM: tegra: fix erroneous address in dts Ralf Ramsauer
[not found] ` <1468835208-13426-1-git-send-email-ralf-ex4EvEgDZR1o7HI0AxOeTKwczVv4G7md@public.gmane.org>
2016-07-18 9:58 ` Thierry Reding [this message]
2016-07-21 12:28 ` Arnd Bergmann
2016-07-21 12:37 ` Ralf Ramsauer
2016-07-24 20:38 ` Ralf Ramsauer
[not found] ` <c44f8315-d9dd-cf0b-775b-231af99ba7d3-ex4EvEgDZR1o7HI0AxOeTKwczVv4G7md@public.gmane.org>
2016-07-25 14:18 ` Thierry Reding
2016-08-10 20:46 ` Arnd Bergmann
2016-08-12 17:26 ` Ralf Ramsauer
[not found] ` <d2469177-0eae-cd11-aa43-74baa374cc6c-ex4EvEgDZR1o7HI0AxOeTKwczVv4G7md@public.gmane.org>
2016-08-29 13:53 ` Ralf Ramsauer
2016-09-07 13:50 ` Ralf Ramsauer
[not found] ` <78670ccc-83ad-c7be-0377-dea1d794c078-ex4EvEgDZR1o7HI0AxOeTKwczVv4G7md@public.gmane.org>
2016-09-08 4:18 ` Olof Johansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160718095802.GA422@ulmo.ba.sec \
--to=thierry.reding-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=arm-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=gnurou-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=ralf-ex4EvEgDZR1o7HI0AxOeTKwczVv4G7md@public.gmane.org \
--cc=swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).