* [Patch v2 1/5] ARM: dts: qcom: Add initial DTS for LG Nexus 5 Phone
2016-07-19 5:04 [Patch v2 0/5] Initial support for LG Nexus 5 phone (hammerhead) Bhushan Shah
@ 2016-07-19 5:04 ` Bhushan Shah
2016-07-28 16:55 ` Bjorn Andersson
[not found] ` <20160719050414.31704-1-bshah-RoXCvvDuEio@public.gmane.org>
` (3 subsequent siblings)
4 siblings, 1 reply; 10+ messages in thread
From: Bhushan Shah @ 2016-07-19 5:04 UTC (permalink / raw)
Cc: Bhushan Shah, Andy Gross, Bjorn Andersson, David Brown,
Mark Rutland, Rob Herring, Russell King, devicetree,
linux-arm-kernel, linux-arm-msm
This DTS file have support LG Nexus 5 (codenamed hammerhead).
Initial version have support for just serial console over headphone
jack.
Cc: Andy Gross <andy.gross@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: David Brown <david.brown@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Bhushan Shah <bshah@kde.org>
---
Changes in v2
- Removed qcom,msm-id
- Added "lge,hammerhead" in the compatible
arch/arm/boot/dts/Makefile | 1 +
.../dts/qcom-msm8974-lge-nexus5-hammerhead.dts | 23 ++++++++++++++++++++++
2 files changed, 24 insertions(+)
create mode 100644 arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 414b427..13947ec 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -584,6 +584,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-ipq8064-ap148.dtb \
qcom-msm8660-surf.dtb \
qcom-msm8960-cdp.dtb \
+ qcom-msm8974-lge-nexus5-hammerhead.dtb \
qcom-msm8974-sony-xperia-honami.dtb
dtb-$(CONFIG_ARCH_REALVIEW) += \
arm-realview-pb1176.dtb \
diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
new file mode 100644
index 0000000..68f3a8a
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -0,0 +1,23 @@
+#include "qcom-msm8974.dtsi"
+#include "qcom-pm8841.dtsi"
+#include "qcom-pm8941.dtsi"
+
+/ {
+ model = "LGE MSM 8974 HAMMERHEAD";
+ compatible = "lge,hammerhead", "qcom,msm8974";
+
+ aliases {
+ serial0 = &blsp1_uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&soc {
+ serial@f991d000 {
+ status = "ok";
+ };
+
+};
--
2.9.0
^ permalink raw reply related [flat|nested] 10+ messages in thread* Re: [Patch v2 1/5] ARM: dts: qcom: Add initial DTS for LG Nexus 5 Phone
2016-07-19 5:04 ` [Patch v2 1/5] ARM: dts: qcom: Add initial DTS for LG Nexus 5 Phone Bhushan Shah
@ 2016-07-28 16:55 ` Bjorn Andersson
0 siblings, 0 replies; 10+ messages in thread
From: Bjorn Andersson @ 2016-07-28 16:55 UTC (permalink / raw)
To: Bhushan Shah
Cc: Andy Gross, David Brown, Mark Rutland, Rob Herring, Russell King,
devicetree, linux-arm-kernel, linux-arm-msm
On Mon 18 Jul 22:04 PDT 2016, Bhushan Shah wrote:
> This DTS file have support LG Nexus 5 (codenamed hammerhead).
> Initial version have support for just serial console over headphone
> jack.
>
> Cc: Andy Gross <andy.gross@linaro.org>
> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
> Cc: David Brown <david.brown@linaro.org>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Russell King <linux@armlinux.org.uk>
> Cc: devicetree@vger.kernel.org
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-arm-msm@vger.kernel.org
> Signed-off-by: Bhushan Shah <bshah@kde.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Regards,
Bjorn
> ---
> Changes in v2
> - Removed qcom,msm-id
> - Added "lge,hammerhead" in the compatible
>
> arch/arm/boot/dts/Makefile | 1 +
> .../dts/qcom-msm8974-lge-nexus5-hammerhead.dts | 23 ++++++++++++++++++++++
> 2 files changed, 24 insertions(+)
> create mode 100644 arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 414b427..13947ec 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -584,6 +584,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
> qcom-ipq8064-ap148.dtb \
> qcom-msm8660-surf.dtb \
> qcom-msm8960-cdp.dtb \
> + qcom-msm8974-lge-nexus5-hammerhead.dtb \
> qcom-msm8974-sony-xperia-honami.dtb
> dtb-$(CONFIG_ARCH_REALVIEW) += \
> arm-realview-pb1176.dtb \
> diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
> new file mode 100644
> index 0000000..68f3a8a
> --- /dev/null
> +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
> @@ -0,0 +1,23 @@
> +#include "qcom-msm8974.dtsi"
> +#include "qcom-pm8841.dtsi"
> +#include "qcom-pm8941.dtsi"
> +
> +/ {
> + model = "LGE MSM 8974 HAMMERHEAD";
> + compatible = "lge,hammerhead", "qcom,msm8974";
> +
> + aliases {
> + serial0 = &blsp1_uart1;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +};
> +
> +&soc {
> + serial@f991d000 {
> + status = "ok";
> + };
> +
> +};
> --
> 2.9.0
>
^ permalink raw reply [flat|nested] 10+ messages in thread
[parent not found: <20160719050414.31704-1-bshah-RoXCvvDuEio@public.gmane.org>]
* [Patch v2 2/5] ARM: dts: msm8974: Move vreg_boost node from the honami to msm8974
[not found] ` <20160719050414.31704-1-bshah-RoXCvvDuEio@public.gmane.org>
@ 2016-07-19 5:04 ` Bhushan Shah
2016-07-28 16:58 ` Bjorn Andersson
0 siblings, 1 reply; 10+ messages in thread
From: Bhushan Shah @ 2016-07-19 5:04 UTC (permalink / raw)
Cc: Bhushan Shah, Andy Gross, Bjorn Andersson, David Brown,
Rob Herring, Mark Rutland, Russell King,
linux-arm-msm-u79uwXL29TY76Z2rM5mHXA,
linux-soc-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA
vreg_boost is Qualcomm platform specific and is also used in hammerhead
device.
Cc: Andy Gross <andy.gross-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: Bjorn Andersson <bjorn.andersson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: David Brown <david.brown-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
Cc: Russell King <linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org>
Cc: linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: linux-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Signed-off-by: Bhushan Shah <bshah-RoXCvvDuEio@public.gmane.org>
---
arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts | 18 ++----------------
arch/arm/boot/dts/qcom-msm8974.dtsi | 11 +++++++++++
arch/arm/boot/dts/qcom-pm8941.dtsi | 6 ++++++
3 files changed, 19 insertions(+), 16 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
index a0398b6..8e33fc3 100644
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
@@ -258,22 +258,13 @@
};
};
- vreg_boost: vreg-boost {
- compatible = "regulator-fixed";
-
- regulator-name = "vreg-boost";
- regulator-min-microvolt = <3150000>;
- regulator-max-microvolt = <3150000>;
-
- regulator-always-on;
- regulator-boot-on;
-
+ vreg_boost {
gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
pinctrl-0 = <&boost_bypass_n_pin>;
- };
+ };
};
&soc {
@@ -383,11 +374,6 @@
};
gpios@c000 {
- boost_bypass_n_pin: boost-bypass {
- pins = "gpio21";
- function = "normal";
- };
-
gpio_keys_pin_a: gpio-keys-active {
pins = "gpio2", "gpio3", "gpio4", "gpio5";
function = "normal";
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index dc2ce00..570028c 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -604,4 +604,15 @@
};
};
};
+
+ vreg_boost: vreg-boost {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vreg-boost";
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3150000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
};
diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi
index d95edb6..ae8e5cc 100644
--- a/arch/arm/boot/dts/qcom-pm8941.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8941.dtsi
@@ -88,6 +88,12 @@
<0 0xe1 0 IRQ_TYPE_NONE>,
<0 0xe2 0 IRQ_TYPE_NONE>,
<0 0xe3 0 IRQ_TYPE_NONE>;
+
+ boost_bypass_n_pin: boost-bypass {
+ pins = "gpio21";
+ function = "normal";
+ };
+
};
pm8941_mpps: mpps@a000 {
--
2.9.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 10+ messages in thread* Re: [Patch v2 2/5] ARM: dts: msm8974: Move vreg_boost node from the honami to msm8974
2016-07-19 5:04 ` [Patch v2 2/5] ARM: dts: msm8974: Move vreg_boost node from the honami to msm8974 Bhushan Shah
@ 2016-07-28 16:58 ` Bjorn Andersson
0 siblings, 0 replies; 10+ messages in thread
From: Bjorn Andersson @ 2016-07-28 16:58 UTC (permalink / raw)
To: Bhushan Shah
Cc: Andy Gross, David Brown, Rob Herring, Mark Rutland, Russell King,
linux-arm-msm, linux-soc, devicetree
On Mon 18 Jul 22:04 PDT 2016, Bhushan Shah wrote:
> vreg_boost is Qualcomm platform specific and is also used in hammerhead
> device.
>
> Cc: Andy Gross <andy.gross@linaro.org>
> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
> Cc: David Brown <david.brown@linaro.org>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Russell King <linux@armlinux.org.uk>
> Cc: linux-arm-msm@vger.kernel.org
> Cc: linux-soc@vger.kernel.org
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Bhushan Shah <bshah@kde.org>
> ---
> arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts | 18 ++----------------
> arch/arm/boot/dts/qcom-msm8974.dtsi | 11 +++++++++++
> arch/arm/boot/dts/qcom-pm8941.dtsi | 6 ++++++
> 3 files changed, 19 insertions(+), 16 deletions(-)
>
> diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
> index a0398b6..8e33fc3 100644
> --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
> +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
> @@ -258,22 +258,13 @@
> };
> };
>
> - vreg_boost: vreg-boost {
> - compatible = "regulator-fixed";
> -
> - regulator-name = "vreg-boost";
> - regulator-min-microvolt = <3150000>;
> - regulator-max-microvolt = <3150000>;
> -
> - regulator-always-on;
> - regulator-boot-on;
> -
> + vreg_boost {
> gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
> enable-active-high;
>
> pinctrl-names = "default";
> pinctrl-0 = <&boost_bypass_n_pin>;
> - };
> + };
This part is Qualcomm reference design and I think we should just move
the entire node to the dtsi. Sorry if I wasn't clearer.
Regards,
Bjorn
^ permalink raw reply [flat|nested] 10+ messages in thread
* [Patch v2 3/5] ARM: dts: qcom: msm8974: Add fixed regulator node for vph-pwr-reg
2016-07-19 5:04 [Patch v2 0/5] Initial support for LG Nexus 5 phone (hammerhead) Bhushan Shah
2016-07-19 5:04 ` [Patch v2 1/5] ARM: dts: qcom: Add initial DTS for LG Nexus 5 Phone Bhushan Shah
[not found] ` <20160719050414.31704-1-bshah-RoXCvvDuEio@public.gmane.org>
@ 2016-07-19 5:04 ` Bhushan Shah
2016-07-28 17:01 ` Bjorn Andersson
2016-07-19 5:04 ` [Patch v2 4/5] ARM: dts: msm8974-hammerhead: Add regulator nodes for hammerhead Bhushan Shah
2016-07-19 5:04 ` [Patch v2 5/5] ARM: dts: msm8974-hammerhead: Introduce gpio-keys nodes Bhushan Shah
4 siblings, 1 reply; 10+ messages in thread
From: Bhushan Shah @ 2016-07-19 5:04 UTC (permalink / raw)
Cc: Bhushan Shah, Andy Gross, Bjorn Andersson, David Brown,
Rob Herring, Mark Rutland, Russell King, linux-arm-msm, linux-soc,
devicetree
Cc: Andy Gross <andy.gross@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: David Brown <david.brown@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-soc@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Bhushan Shah <bshah@kde.org>
---
arch/arm/boot/dts/qcom-msm8974.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 570028c..b5e80a4 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -615,4 +615,14 @@
regulator-always-on;
regulator-boot-on;
};
+
+ vph_pwr_reg: vph-pwr-reg {
+ compatible = "regulator-fixed";
+ regulator-name = "vph-pwr";
+
+ regulator-min-microvolt = <3600000>;
+ regulator-max-microvolt = <3600000>;
+
+ regulator-always-on;
+ };
};
--
2.9.0
^ permalink raw reply related [flat|nested] 10+ messages in thread* Re: [Patch v2 3/5] ARM: dts: qcom: msm8974: Add fixed regulator node for vph-pwr-reg
2016-07-19 5:04 ` [Patch v2 3/5] ARM: dts: qcom: msm8974: Add fixed regulator node for vph-pwr-reg Bhushan Shah
@ 2016-07-28 17:01 ` Bjorn Andersson
0 siblings, 0 replies; 10+ messages in thread
From: Bjorn Andersson @ 2016-07-28 17:01 UTC (permalink / raw)
To: Bhushan Shah
Cc: Andy Gross, David Brown, Rob Herring, Mark Rutland, Russell King,
linux-arm-msm, linux-soc, devicetree
On Mon 18 Jul 22:04 PDT 2016, Bhushan Shah wrote:
> Cc: Andy Gross <andy.gross@linaro.org>
> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
> Cc: David Brown <david.brown@linaro.org>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Russell King <linux@armlinux.org.uk>
> Cc: linux-arm-msm@vger.kernel.org
> Cc: linux-soc@vger.kernel.org
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Bhushan Shah <bshah@kde.org>
> ---
> arch/arm/boot/dts/qcom-msm8974.dtsi | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
> index 570028c..b5e80a4 100644
> --- a/arch/arm/boot/dts/qcom-msm8974.dtsi
> +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
> @@ -615,4 +615,14 @@
> regulator-always-on;
> regulator-boot-on;
> };
> +
> + vph_pwr_reg: vph-pwr-reg {
Please change this to:
vreg_vph_pwr: vreg-vph-pwr { ...
And you have my
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> + compatible = "regulator-fixed";
> + regulator-name = "vph-pwr";
But this name is good.
> +
> + regulator-min-microvolt = <3600000>;
> + regulator-max-microvolt = <3600000>;
> +
> + regulator-always-on;
> + };
> };
Regards,
Bjorn
^ permalink raw reply [flat|nested] 10+ messages in thread
* [Patch v2 4/5] ARM: dts: msm8974-hammerhead: Add regulator nodes for hammerhead
2016-07-19 5:04 [Patch v2 0/5] Initial support for LG Nexus 5 phone (hammerhead) Bhushan Shah
` (2 preceding siblings ...)
2016-07-19 5:04 ` [Patch v2 3/5] ARM: dts: qcom: msm8974: Add fixed regulator node for vph-pwr-reg Bhushan Shah
@ 2016-07-19 5:04 ` Bhushan Shah
2016-07-28 17:02 ` Bjorn Andersson
2016-07-19 5:04 ` [Patch v2 5/5] ARM: dts: msm8974-hammerhead: Introduce gpio-keys nodes Bhushan Shah
4 siblings, 1 reply; 10+ messages in thread
From: Bhushan Shah @ 2016-07-19 5:04 UTC (permalink / raw)
Cc: Bhushan Shah, Andy Gross, Bjorn Andersson, David Brown,
Rob Herring, Mark Rutland, Russell King, linux-arm-msm, linux-soc,
devicetree
Cc: Andy Gross <andy.gross@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: David Brown <david.brown@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-soc@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Bhushan Shah <bshah@kde.org>
---
.../dts/qcom-msm8974-lge-nexus5-hammerhead.dts | 212 +++++++++++++++++++++
1 file changed, 212 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
index 68f3a8a..066a8dc 100644
--- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -1,6 +1,8 @@
#include "qcom-msm8974.dtsi"
#include "qcom-pm8841.dtsi"
#include "qcom-pm8941.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
/ {
model = "LGE MSM 8974 HAMMERHEAD";
@@ -13,6 +15,216 @@
chosen {
stdout-path = "serial0:115200n8";
};
+
+ smd {
+ rpm {
+ rpm_requests {
+ pm8841-regulators {
+ s1 {
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ s2 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ s3 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ s4 {
+ regulator-min-microvolt = <815000>;
+ regulator-max-microvolt = <900000>;
+ };
+ };
+
+ pm8941-regulators {
+ vdd_l1_l3-supply = <&pm8941_s1>;
+ vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+ vdd_l4_l11-supply = <&pm8941_s1>;
+ vdd_l5_l7-supply = <&pm8941_s2>;
+ vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+ vdd_l8_l16_l18_l19-supply = <&vph_pwr_reg>;
+ vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
+ vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
+ vdd_l21-supply = <&vreg_boost>;
+
+ s1 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ s2 {
+ regulator-min-microvolt = <2150000>;
+ regulator-max-microvolt = <2150000>;
+
+ regulator-boot-on;
+ };
+
+ s3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ l1 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ l3 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ l4 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ l5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-boot-on;
+ };
+
+ l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-boot-on;
+ };
+
+ l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ l10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ l11 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ l13 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+
+ regulator-boot-on;
+ };
+
+ l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l15 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ l16 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ l17 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ l18 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ l19 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ l20 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+
+ regulator-boot-on;
+ };
+
+ l21 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+
+ regulator-boot-on;
+ };
+
+ l22 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ l23 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ l24 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+
+ regulator-boot-on;
+ };
+ };
+ };
+ };
+ };
+
+ vreg_boost {
+ gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&boost_bypass_n_pin>;
+ };
+
};
&soc {
--
2.9.0
^ permalink raw reply related [flat|nested] 10+ messages in thread* Re: [Patch v2 4/5] ARM: dts: msm8974-hammerhead: Add regulator nodes for hammerhead
2016-07-19 5:04 ` [Patch v2 4/5] ARM: dts: msm8974-hammerhead: Add regulator nodes for hammerhead Bhushan Shah
@ 2016-07-28 17:02 ` Bjorn Andersson
0 siblings, 0 replies; 10+ messages in thread
From: Bjorn Andersson @ 2016-07-28 17:02 UTC (permalink / raw)
To: Bhushan Shah
Cc: Andy Gross, David Brown, Rob Herring, Mark Rutland, Russell King,
linux-arm-msm, linux-soc, devicetree
On Mon 18 Jul 22:04 PDT 2016, Bhushan Shah wrote:
> Cc: Andy Gross <andy.gross@linaro.org>
> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
> Cc: David Brown <david.brown@linaro.org>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Russell King <linux@armlinux.org.uk>
> Cc: linux-arm-msm@vger.kernel.org
> Cc: linux-soc@vger.kernel.org
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Bhushan Shah <bshah@kde.org>
> ---
> .../dts/qcom-msm8974-lge-nexus5-hammerhead.dts | 212 +++++++++++++++++++++
> 1 file changed, 212 insertions(+)
>
> diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
> index 68f3a8a..066a8dc 100644
> --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
> +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
> @@ -1,6 +1,8 @@
> #include "qcom-msm8974.dtsi"
> #include "qcom-pm8841.dtsi"
> #include "qcom-pm8941.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
>
> / {
> model = "LGE MSM 8974 HAMMERHEAD";
> @@ -13,6 +15,216 @@
> chosen {
> stdout-path = "serial0:115200n8";
> };
> +
> + smd {
> + rpm {
> + rpm_requests {
> + pm8841-regulators {
> + s1 {
> + regulator-min-microvolt = <675000>;
> + regulator-max-microvolt = <1050000>;
> + };
> +
> + s2 {
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <1050000>;
> + };
> +
> + s3 {
> + regulator-min-microvolt = <1050000>;
> + regulator-max-microvolt = <1050000>;
> + };
> +
> + s4 {
> + regulator-min-microvolt = <815000>;
> + regulator-max-microvolt = <900000>;
> + };
> + };
> +
> + pm8941-regulators {
> + vdd_l1_l3-supply = <&pm8941_s1>;
> + vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
> + vdd_l4_l11-supply = <&pm8941_s1>;
> + vdd_l5_l7-supply = <&pm8941_s2>;
> + vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
> + vdd_l8_l16_l18_l19-supply = <&vph_pwr_reg>;
> + vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
> + vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
> + vdd_l21-supply = <&vreg_boost>;
> +
> + s1 {
> + regulator-min-microvolt = <1300000>;
> + regulator-max-microvolt = <1300000>;
> +
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + s2 {
> + regulator-min-microvolt = <2150000>;
> + regulator-max-microvolt = <2150000>;
> +
> + regulator-boot-on;
> + };
> +
> + s3 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + l1 {
> + regulator-min-microvolt = <1225000>;
> + regulator-max-microvolt = <1225000>;
> +
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + l2 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + };
> +
> + l3 {
> + regulator-min-microvolt = <1225000>;
> + regulator-max-microvolt = <1225000>;
> + };
> +
> + l4 {
> + regulator-min-microvolt = <1225000>;
> + regulator-max-microvolt = <1225000>;
> + };
> +
> + l5 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + l6 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + regulator-boot-on;
> + };
> +
> + l7 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + regulator-boot-on;
> + };
> +
> + l8 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + l9 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2950000>;
> + };
> +
> + l10 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2950000>;
> + };
> +
> + l11 {
> + regulator-min-microvolt = <1300000>;
> + regulator-max-microvolt = <1300000>;
> + };
> +
> + l12 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + l13 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2950000>;
> +
> + regulator-boot-on;
> + };
> +
> + l14 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + l15 {
> + regulator-min-microvolt = <2050000>;
> + regulator-max-microvolt = <2050000>;
> + };
> +
> + l16 {
> + regulator-min-microvolt = <2700000>;
> + regulator-max-microvolt = <2700000>;
> + };
> +
> + l17 {
> + regulator-min-microvolt = <2850000>;
> + regulator-max-microvolt = <2850000>;
> + };
> +
> + l18 {
> + regulator-min-microvolt = <2850000>;
> + regulator-max-microvolt = <2850000>;
> + };
> +
> + l19 {
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + l20 {
> + regulator-min-microvolt = <2950000>;
> + regulator-max-microvolt = <2950000>;
> +
> + regulator-boot-on;
> + };
> +
> + l21 {
> + regulator-min-microvolt = <2950000>;
> + regulator-max-microvolt = <2950000>;
> +
> + regulator-boot-on;
> + };
> +
> + l22 {
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + l23 {
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + };
> +
> + l24 {
> + regulator-min-microvolt = <3075000>;
> + regulator-max-microvolt = <3075000>;
> +
> + regulator-boot-on;
> + };
> + };
> + };
> + };
> + };
Looks good, for this part:
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> +
> + vreg_boost {
> + gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&boost_bypass_n_pin>;
> + };
Please update the Honami patch and drop this node.
Regards,
Bjorn
^ permalink raw reply [flat|nested] 10+ messages in thread
* [Patch v2 5/5] ARM: dts: msm8974-hammerhead: Introduce gpio-keys nodes
2016-07-19 5:04 [Patch v2 0/5] Initial support for LG Nexus 5 phone (hammerhead) Bhushan Shah
` (3 preceding siblings ...)
2016-07-19 5:04 ` [Patch v2 4/5] ARM: dts: msm8974-hammerhead: Add regulator nodes for hammerhead Bhushan Shah
@ 2016-07-19 5:04 ` Bhushan Shah
4 siblings, 0 replies; 10+ messages in thread
From: Bhushan Shah @ 2016-07-19 5:04 UTC (permalink / raw)
Cc: Bhushan Shah, Andy Gross, Bjorn Andersson, David Brown,
Rob Herring, Mark Rutland, Russell King, linux-arm-msm, linux-soc,
devicetree
This introduces the gpio-keys node for keys of hammerhead and pinctrl
state associated with it.
Cc: Andy Gross <andy.gross@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: David Brown <david.brown@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-soc@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Bhushan Shah <bshah@kde.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
.../dts/qcom-msm8974-lge-nexus5-hammerhead.dts | 36 ++++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
index 066a8dc..68f071f 100644
--- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -2,6 +2,7 @@
#include "qcom-pm8841.dtsi"
#include "qcom-pm8941.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
/ {
@@ -232,4 +233,39 @@
status = "ok";
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ input-name = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys_pin_a>;
+
+ volume-up {
+ label = "volume_up";
+ gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+
+ volume-down {
+ label = "volume_down";
+ gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+ };
+};
+
+&spmi_bus {
+ pm8941@0 {
+ gpios@c000 {
+ gpio_keys_pin_a: gpio-keys-active {
+ pins = "gpio2", "gpio3";
+ function = "normal";
+
+ bias-pull-up;
+ power-source = <PM8941_GPIO_S3>;
+ };
+ };
+ };
};
--
2.9.0
^ permalink raw reply related [flat|nested] 10+ messages in thread