From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stephen Boyd Subject: Re: [PATCH V3 2/4] clk: Combine DT binding doc for max77686 and max77802 Date: Mon, 15 Aug 2016 15:40:22 -0700 Message-ID: <20160815224022.GP361@codeaurora.org> References: <1466160667-28451-1-git-send-email-ldewangan@nvidia.com> <1466160667-28451-3-git-send-email-ldewangan@nvidia.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <1466160667-28451-3-git-send-email-ldewangan@nvidia.com> Sender: linux-clk-owner@vger.kernel.org To: Laxman Dewangan Cc: mturquette@baylibre.com, robh+dt@kernel.org, linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Krzysztof Kozlowski , Javier Martinez Canillas List-Id: devicetree@vger.kernel.org On 06/17, Laxman Dewangan wrote: > The clock IP used on the Maxim PMICs max77686 and max77802 are > same. The configuration of clock register is also same except > the number of clocks. > > Define the common DT binding file for the clocks of Maxim PMICs > MAX77686 and MAX77802. For this, remove the separate DT binding > document file for maxim,max77802 and move all information to > maxim,max77686 DT binding document. > > Signed-off-by: Laxman Dewangan > CC: Krzysztof Kozlowski > CC: Javier Martinez Canillas > Reviewed-by: Krzysztof Kozlowski > Reviewed-by: Javier Martinez Canillas > > --- Applied to clk-next -- Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project