From: Jaedon Shin <jaedon.shin-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Ralf Baechle <ralf-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org>,
Florian Fainelli
<f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Jonas Gorski
<jonas.gorski-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Kevin Cernekee <cernekee-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
MIPS Mailing List
<linux-mips-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Jaedon Shin <jaedon.shin-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Subject: [v4 1/5] MIPS: BMIPS: Add support PWM device nodes
Date: Fri, 19 Aug 2016 11:52:26 +0900 [thread overview]
Message-ID: <20160819025230.31882-2-jaedon.shin@gmail.com> (raw)
In-Reply-To: <20160819025230.31882-1-jaedon.shin-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Adds PWM device nodes to BCM7xxx MIPS based SoCs.
Signed-off-by: Jaedon Shin <jaedon.shin-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Reviewed-by: Florian Fainelli <f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
arch/mips/boot/dts/brcm/bcm7125.dtsi | 14 ++++++++++++++
arch/mips/boot/dts/brcm/bcm7346.dtsi | 22 ++++++++++++++++++++++
arch/mips/boot/dts/brcm/bcm7358.dtsi | 22 ++++++++++++++++++++++
arch/mips/boot/dts/brcm/bcm7360.dtsi | 14 ++++++++++++++
arch/mips/boot/dts/brcm/bcm7362.dtsi | 14 ++++++++++++++
arch/mips/boot/dts/brcm/bcm7420.dtsi | 22 ++++++++++++++++++++++
arch/mips/boot/dts/brcm/bcm7425.dtsi | 22 ++++++++++++++++++++++
arch/mips/boot/dts/brcm/bcm7435.dtsi | 22 ++++++++++++++++++++++
arch/mips/boot/dts/brcm/bcm97125cbmb.dts | 4 ++++
arch/mips/boot/dts/brcm/bcm97346dbsmb.dts | 8 ++++++++
arch/mips/boot/dts/brcm/bcm97358svmb.dts | 8 ++++++++
arch/mips/boot/dts/brcm/bcm97360svmb.dts | 4 ++++
arch/mips/boot/dts/brcm/bcm97362svmb.dts | 4 ++++
arch/mips/boot/dts/brcm/bcm97420c.dts | 8 ++++++++
arch/mips/boot/dts/brcm/bcm97425svmb.dts | 8 ++++++++
arch/mips/boot/dts/brcm/bcm97435svmb.dts | 8 ++++++++
16 files changed, 204 insertions(+)
diff --git a/arch/mips/boot/dts/brcm/bcm7125.dtsi b/arch/mips/boot/dts/brcm/bcm7125.dtsi
index 550e1d9e3ee0..97191f6bca28 100644
--- a/arch/mips/boot/dts/brcm/bcm7125.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7125.dtsi
@@ -40,6 +40,12 @@
#clock-cells = <0>;
clock-frequency = <81000000>;
};
+
+ upg_clk: upg_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ };
};
rdb {
@@ -183,6 +189,14 @@
status = "disabled";
};
+ pwma: pwm@406580 {
+ compatible = "brcm,bcm7038-pwm";
+ reg = <0x406580 0x28>;
+ #pwm-cells = <2>;
+ clocks = <&upg_clk>;
+ status = "disabled";
+ };
+
ehci0: usb@488300 {
compatible = "brcm,bcm7125-ehci", "generic-ehci";
reg = <0x488300 0x100>;
diff --git a/arch/mips/boot/dts/brcm/bcm7346.dtsi b/arch/mips/boot/dts/brcm/bcm7346.dtsi
index ec959061d52e..eb7b19a32e3e 100644
--- a/arch/mips/boot/dts/brcm/bcm7346.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7346.dtsi
@@ -40,6 +40,12 @@
#clock-cells = <0>;
clock-frequency = <81000000>;
};
+
+ upg_clk: upg_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ };
};
rdb {
@@ -210,6 +216,22 @@
status = "disabled";
};
+ pwma: pwm@406580 {
+ compatible = "brcm,bcm7038-pwm";
+ reg = <0x406580 0x28>;
+ #pwm-cells = <2>;
+ clocks = <&upg_clk>;
+ status = "disabled";
+ };
+
+ pwmb: pwm@406800 {
+ compatible = "brcm,bcm7038-pwm";
+ reg = <0x406800 0x28>;
+ #pwm-cells = <2>;
+ clocks = <&upg_clk>;
+ status = "disabled";
+ };
+
enet0: ethernet@430000 {
phy-mode = "internal";
phy-handle = <&phy1>;
diff --git a/arch/mips/boot/dts/brcm/bcm7358.dtsi b/arch/mips/boot/dts/brcm/bcm7358.dtsi
index ca57fb5eb122..b2276b1e12d4 100644
--- a/arch/mips/boot/dts/brcm/bcm7358.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7358.dtsi
@@ -34,6 +34,12 @@
#clock-cells = <0>;
clock-frequency = <81000000>;
};
+
+ upg_clk: upg_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ };
};
rdb {
@@ -194,6 +200,22 @@
status = "disabled";
};
+ pwma: pwm@406400 {
+ compatible = "brcm,bcm7038-pwm";
+ reg = <0x406400 0x28>;
+ #pwm-cells = <2>;
+ clocks = <&upg_clk>;
+ status = "disabled";
+ };
+
+ pwmb: pwm@406700 {
+ compatible = "brcm,bcm7038-pwm";
+ reg = <0x406700 0x28>;
+ #pwm-cells = <2>;
+ clocks = <&upg_clk>;
+ status = "disabled";
+ };
+
enet0: ethernet@430000 {
phy-mode = "internal";
phy-handle = <&phy1>;
diff --git a/arch/mips/boot/dts/brcm/bcm7360.dtsi b/arch/mips/boot/dts/brcm/bcm7360.dtsi
index 1c0c3d438c7a..e414af1e14ff 100644
--- a/arch/mips/boot/dts/brcm/bcm7360.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7360.dtsi
@@ -34,6 +34,12 @@
#clock-cells = <0>;
clock-frequency = <81000000>;
};
+
+ upg_clk: upg_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ };
};
rdb {
@@ -194,6 +200,14 @@
status = "disabled";
};
+ pwma: pwm@406400 {
+ compatible = "brcm,bcm7038-pwm";
+ reg = <0x406400 0x28>;
+ #pwm-cells = <2>;
+ clocks = <&upg_clk>;
+ status = "disabled";
+ };
+
enet0: ethernet@430000 {
phy-mode = "internal";
phy-handle = <&phy1>;
diff --git a/arch/mips/boot/dts/brcm/bcm7362.dtsi b/arch/mips/boot/dts/brcm/bcm7362.dtsi
index 6b4713add4b8..3bd1c0111d43 100644
--- a/arch/mips/boot/dts/brcm/bcm7362.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7362.dtsi
@@ -40,6 +40,12 @@
#clock-cells = <0>;
clock-frequency = <81000000>;
};
+
+ upg_clk: upg_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ };
};
rdb {
@@ -190,6 +196,14 @@
status = "disabled";
};
+ pwma: pwm@406400 {
+ compatible = "brcm,bcm7038-pwm";
+ reg = <0x406400 0x28>;
+ #pwm-cells = <2>;
+ clocks = <&upg_clk>;
+ status = "disabled";
+ };
+
enet0: ethernet@430000 {
phy-mode = "internal";
phy-handle = <&phy1>;
diff --git a/arch/mips/boot/dts/brcm/bcm7420.dtsi b/arch/mips/boot/dts/brcm/bcm7420.dtsi
index 0586bf662571..27c3d45556b9 100644
--- a/arch/mips/boot/dts/brcm/bcm7420.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7420.dtsi
@@ -40,6 +40,12 @@
#clock-cells = <0>;
clock-frequency = <81000000>;
};
+
+ upg_clk: upg_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ };
};
rdb {
@@ -191,6 +197,22 @@
status = "disabled";
};
+ pwma: pwm@406580 {
+ compatible = "brcm,bcm7038-pwm";
+ reg = <0x406580 0x28>;
+ #pwm-cells = <2>;
+ clocks = <&upg_clk>;
+ status = "disabled";
+ };
+
+ pwmb: pwm@406880 {
+ compatible = "brcm,bcm7038-pwm";
+ reg = <0x406880 0x28>;
+ #pwm-cells = <2>;
+ clocks = <&upg_clk>;
+ status = "disabled";
+ };
+
enet0: ethernet@468000 {
phy-mode = "internal";
phy-handle = <&phy1>;
diff --git a/arch/mips/boot/dts/brcm/bcm7425.dtsi b/arch/mips/boot/dts/brcm/bcm7425.dtsi
index c1c15edaf829..9ab65d64e948 100644
--- a/arch/mips/boot/dts/brcm/bcm7425.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7425.dtsi
@@ -40,6 +40,12 @@
#clock-cells = <0>;
clock-frequency = <81000000>;
};
+
+ upg_clk: upg_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ };
};
rdb {
@@ -209,6 +215,22 @@
status = "disabled";
};
+ pwma: pwm@406580 {
+ compatible = "brcm,bcm7038-pwm";
+ reg = <0x406580 0x28>;
+ #pwm-cells = <2>;
+ clocks = <&upg_clk>;
+ status = "disabled";
+ };
+
+ pwmb: pwm@406800 {
+ compatible = "brcm,bcm7038-pwm";
+ reg = <0x406800 0x28>;
+ #pwm-cells = <2>;
+ clocks = <&upg_clk>;
+ status = "disabled";
+ };
+
enet0: ethernet@b80000 {
phy-mode = "internal";
phy-handle = <&phy1>;
diff --git a/arch/mips/boot/dts/brcm/bcm7435.dtsi b/arch/mips/boot/dts/brcm/bcm7435.dtsi
index a874d3a0e2ee..7801169416e7 100644
--- a/arch/mips/boot/dts/brcm/bcm7435.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7435.dtsi
@@ -52,6 +52,12 @@
#clock-cells = <0>;
clock-frequency = <81000000>;
};
+
+ upg_clk: upg_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ };
};
rdb {
@@ -224,6 +230,22 @@
status = "disabled";
};
+ pwma: pwm@406580 {
+ compatible = "brcm,bcm7038-pwm";
+ reg = <0x406580 0x28>;
+ #pwm-cells = <2>;
+ clocks = <&upg_clk>;
+ status = "disabled";
+ };
+
+ pwmb: pwm@406800 {
+ compatible = "brcm,bcm7038-pwm";
+ reg = <0x406800 0x28>;
+ #pwm-cells = <2>;
+ clocks = <&upg_clk>;
+ status = "disabled";
+ };
+
enet0: ethernet@b80000 {
phy-mode = "internal";
phy-handle = <&phy1>;
diff --git a/arch/mips/boot/dts/brcm/bcm97125cbmb.dts b/arch/mips/boot/dts/brcm/bcm97125cbmb.dts
index f2449d147c6d..5c24eacd72dd 100644
--- a/arch/mips/boot/dts/brcm/bcm97125cbmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97125cbmb.dts
@@ -45,6 +45,10 @@
status = "okay";
};
+&pwma {
+ status = "okay";
+};
+
/* FIXME: USB is wonky; disable it for now */
&ehci0 {
status = "disabled";
diff --git a/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts b/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts
index d3d28816a027..2c55ab094a29 100644
--- a/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts
@@ -49,6 +49,14 @@
status = "okay";
};
+&pwma {
+ status = "okay";
+};
+
+&pwmb {
+ status = "okay";
+};
+
&enet0 {
status = "okay";
};
diff --git a/arch/mips/boot/dts/brcm/bcm97358svmb.dts b/arch/mips/boot/dts/brcm/bcm97358svmb.dts
index 02ce6b429dc4..757fe9d5f4df 100644
--- a/arch/mips/boot/dts/brcm/bcm97358svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97358svmb.dts
@@ -45,6 +45,14 @@
status = "okay";
};
+&pwma {
+ status = "okay";
+};
+
+&pwmb {
+ status = "okay";
+};
+
&enet0 {
status = "okay";
};
diff --git a/arch/mips/boot/dts/brcm/bcm97360svmb.dts b/arch/mips/boot/dts/brcm/bcm97360svmb.dts
index 73124be9548a..496e6ed9fae3 100644
--- a/arch/mips/boot/dts/brcm/bcm97360svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97360svmb.dts
@@ -45,6 +45,10 @@
status = "okay";
};
+&pwma {
+ status = "okay";
+};
+
&enet0 {
status = "okay";
};
diff --git a/arch/mips/boot/dts/brcm/bcm97362svmb.dts b/arch/mips/boot/dts/brcm/bcm97362svmb.dts
index 3cfcaebe7f79..b880c018f3d8 100644
--- a/arch/mips/boot/dts/brcm/bcm97362svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97362svmb.dts
@@ -41,6 +41,10 @@
status = "okay";
};
+&pwma {
+ status = "okay";
+};
+
&enet0 {
status = "okay";
};
diff --git a/arch/mips/boot/dts/brcm/bcm97420c.dts b/arch/mips/boot/dts/brcm/bcm97420c.dts
index 600d57abee05..e66271af055e 100644
--- a/arch/mips/boot/dts/brcm/bcm97420c.dts
+++ b/arch/mips/boot/dts/brcm/bcm97420c.dts
@@ -51,6 +51,14 @@
status = "okay";
};
+&pwma {
+ status = "okay";
+};
+
+&pwmb {
+ status = "okay";
+};
+
/* FIXME: MAC driver comes up but cannot attach to PHY */
&enet0 {
status = "disabled";
diff --git a/arch/mips/boot/dts/brcm/bcm97425svmb.dts b/arch/mips/boot/dts/brcm/bcm97425svmb.dts
index 119c714805cb..f091e91b11c5 100644
--- a/arch/mips/boot/dts/brcm/bcm97425svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97425svmb.dts
@@ -51,6 +51,14 @@
status = "okay";
};
+&pwma {
+ status = "okay";
+};
+
+&pwmb {
+ status = "okay";
+};
+
&enet0 {
status = "okay";
};
diff --git a/arch/mips/boot/dts/brcm/bcm97435svmb.dts b/arch/mips/boot/dts/brcm/bcm97435svmb.dts
index 43e3ba27f07b..9db84f2a6664 100644
--- a/arch/mips/boot/dts/brcm/bcm97435svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97435svmb.dts
@@ -51,6 +51,14 @@
status = "okay";
};
+&pwma {
+ status = "okay";
+};
+
+&pwmb {
+ status = "okay";
+};
+
&enet0 {
status = "okay";
};
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-08-19 2:52 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-19 2:52 [v4 0/5] Add device nodes for BCM7xxx SoCs Jaedon Shin
[not found] ` <20160819025230.31882-1-jaedon.shin-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-08-19 2:52 ` Jaedon Shin [this message]
2016-08-19 2:52 ` [v4 2/5] MIPS: BMIPS: Add support GPIO device nodes Jaedon Shin
2016-08-19 2:52 ` [v4 3/5] MIPS: BMIPS: Add support SDHCI " Jaedon Shin
2016-08-19 2:52 ` [v4 4/5] MIPS: BMIPS: Add support NAND " Jaedon Shin
2016-08-19 2:52 ` [v4 5/5] MIPS: BMIPS: Use interrupt-controller node name Jaedon Shin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160819025230.31882-2-jaedon.shin@gmail.com \
--to=jaedon.shin-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=cernekee-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=jonas.gorski-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-mips-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org \
--cc=ralf-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).