From: Jaedon Shin <jaedon.shin-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Ralf Baechle <ralf-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org>,
Florian Fainelli
<f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Jonas Gorski
<jonas.gorski-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Kevin Cernekee <cernekee-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
MIPS Mailing List
<linux-mips-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Jaedon Shin <jaedon.shin-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Subject: [v4 2/5] MIPS: BMIPS: Add support GPIO device nodes
Date: Fri, 19 Aug 2016 11:52:27 +0900 [thread overview]
Message-ID: <20160819025230.31882-3-jaedon.shin@gmail.com> (raw)
In-Reply-To: <20160819025230.31882-1-jaedon.shin-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Adds GPIO device nodes to BCM7xxx MIPS based SoCs.
Signed-off-by: Jaedon Shin <jaedon.shin-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
arch/mips/boot/dts/brcm/bcm7125.dtsi | 12 ++++++++++++
arch/mips/boot/dts/brcm/bcm7346.dtsi | 37 ++++++++++++++++++++++++++++++++++++
arch/mips/boot/dts/brcm/bcm7358.dtsi | 37 ++++++++++++++++++++++++++++++++++++
arch/mips/boot/dts/brcm/bcm7360.dtsi | 37 ++++++++++++++++++++++++++++++++++++
arch/mips/boot/dts/brcm/bcm7362.dtsi | 37 ++++++++++++++++++++++++++++++++++++
arch/mips/boot/dts/brcm/bcm7420.dtsi | 12 ++++++++++++
arch/mips/boot/dts/brcm/bcm7425.dtsi | 37 ++++++++++++++++++++++++++++++++++++
arch/mips/boot/dts/brcm/bcm7435.dtsi | 37 ++++++++++++++++++++++++++++++++++++
8 files changed, 246 insertions(+)
diff --git a/arch/mips/boot/dts/brcm/bcm7125.dtsi b/arch/mips/boot/dts/brcm/bcm7125.dtsi
index 97191f6bca28..746ed06c85de 100644
--- a/arch/mips/boot/dts/brcm/bcm7125.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7125.dtsi
@@ -197,6 +197,18 @@
status = "disabled";
};
+ upg_gio: gpio@406700 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x406700 0x80>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_irq0_intc>;
+ interrupts = <6>;
+ brcm,gpio-bank-widths = <32 32 32 18>;
+ };
+
ehci0: usb@488300 {
compatible = "brcm,bcm7125-ehci", "generic-ehci";
reg = <0x488300 0x100>;
diff --git a/arch/mips/boot/dts/brcm/bcm7346.dtsi b/arch/mips/boot/dts/brcm/bcm7346.dtsi
index eb7b19a32e3e..0105e4e5130b 100644
--- a/arch/mips/boot/dts/brcm/bcm7346.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7346.dtsi
@@ -232,6 +232,43 @@
status = "disabled";
};
+ aon_pm_l2_intc: interrupt-controller@408440 {
+ compatible = "brcm,l2-intc";
+ reg = <0x408440 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <53>;
+ brcm,irq-can-wake;
+ };
+
+ upg_gio: gpio@406700 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x406700 0x60>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_irq0_intc>;
+ interrupts = <6>;
+ brcm,gpio-bank-widths = <32 32 16>;
+ };
+
+ upg_gio_aon: gpio@408c00 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x408c00 0x60>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_aon_irq0_intc>;
+ interrupts = <6>;
+ interrupts-extended = <&upg_aon_irq0_intc 6>,
+ <&aon_pm_l2_intc 5>;
+ wakeup-source;
+ brcm,gpio-bank-widths = <27 32 2>;
+ };
+
enet0: ethernet@430000 {
phy-mode = "internal";
phy-handle = <&phy1>;
diff --git a/arch/mips/boot/dts/brcm/bcm7358.dtsi b/arch/mips/boot/dts/brcm/bcm7358.dtsi
index b2276b1e12d4..aec1b2e7e2ab 100644
--- a/arch/mips/boot/dts/brcm/bcm7358.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7358.dtsi
@@ -216,6 +216,43 @@
status = "disabled";
};
+ aon_pm_l2_intc: interrupt-controller@408240 {
+ compatible = "brcm,l2-intc";
+ reg = <0x408240 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <50>;
+ brcm,irq-can-wake;
+ };
+
+ upg_gio: gpio@406500 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x406500 0xa0>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_irq0_intc>;
+ interrupts = <6>;
+ brcm,gpio-bank-widths = <32 32 32 29 4>;
+ };
+
+ upg_gio_aon: gpio@408c00 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x408c00 0x60>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_aon_irq0_intc>;
+ interrupts = <6>;
+ interrupts-extended = <&upg_aon_irq0_intc 6>,
+ <&aon_pm_l2_intc 5>;
+ wakeup-source;
+ brcm,gpio-bank-widths = <21 32 2>;
+ };
+
enet0: ethernet@430000 {
phy-mode = "internal";
phy-handle = <&phy1>;
diff --git a/arch/mips/boot/dts/brcm/bcm7360.dtsi b/arch/mips/boot/dts/brcm/bcm7360.dtsi
index e414af1e14ff..f0f63cb2bd2b 100644
--- a/arch/mips/boot/dts/brcm/bcm7360.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7360.dtsi
@@ -208,6 +208,43 @@
status = "disabled";
};
+ aon_pm_l2_intc: interrupt-controller@408440 {
+ compatible = "brcm,l2-intc";
+ reg = <0x408440 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <50>;
+ brcm,irq-can-wake;
+ };
+
+ upg_gio: gpio@406500 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x406500 0xa0>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_irq0_intc>;
+ interrupts = <6>;
+ brcm,gpio-bank-widths = <32 32 32 29 4>;
+ };
+
+ upg_gio_aon: gpio@408c00 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x408c00 0x60>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_aon_irq0_intc>;
+ interrupts = <6>;
+ interrupts-extended = <&upg_aon_irq0_intc 6>,
+ <&aon_pm_l2_intc 5>;
+ wakeup-source;
+ brcm,gpio-bank-widths = <21 32 2>;
+ };
+
enet0: ethernet@430000 {
phy-mode = "internal";
phy-handle = <&phy1>;
diff --git a/arch/mips/boot/dts/brcm/bcm7362.dtsi b/arch/mips/boot/dts/brcm/bcm7362.dtsi
index 3bd1c0111d43..ac42b98e31bb 100644
--- a/arch/mips/boot/dts/brcm/bcm7362.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7362.dtsi
@@ -204,6 +204,43 @@
status = "disabled";
};
+ aon_pm_l2_intc: interrupt-controller@408440 {
+ compatible = "brcm,l2-intc";
+ reg = <0x408440 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <50>;
+ brcm,irq-can-wake;
+ };
+
+ upg_gio: gpio@406500 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x406500 0xa0>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_irq0_intc>;
+ interrupts = <6>;
+ brcm,gpio-bank-widths = <32 32 32 29 4>;
+ };
+
+ upg_gio_aon: gpio@408c00 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x408c00 0x60>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_aon_irq0_intc>;
+ interrupts = <6>;
+ interrupts-extended = <&upg_aon_irq0_intc 6>,
+ <&aon_pm_l2_intc 5>;
+ wakeup-source;
+ brcm,gpio-bank-widths = <21 32 2>;
+ };
+
enet0: ethernet@430000 {
phy-mode = "internal";
phy-handle = <&phy1>;
diff --git a/arch/mips/boot/dts/brcm/bcm7420.dtsi b/arch/mips/boot/dts/brcm/bcm7420.dtsi
index 27c3d45556b9..0d391d77c780 100644
--- a/arch/mips/boot/dts/brcm/bcm7420.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7420.dtsi
@@ -213,6 +213,18 @@
status = "disabled";
};
+ upg_gio: gpio@406700 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x406700 0x80>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_irq0_intc>;
+ interrupts = <6>;
+ brcm,gpio-bank-widths = <32 32 32 27>;
+ };
+
enet0: ethernet@468000 {
phy-mode = "internal";
phy-handle = <&phy1>;
diff --git a/arch/mips/boot/dts/brcm/bcm7425.dtsi b/arch/mips/boot/dts/brcm/bcm7425.dtsi
index 9ab65d64e948..8b05b98f2a9c 100644
--- a/arch/mips/boot/dts/brcm/bcm7425.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7425.dtsi
@@ -231,6 +231,43 @@
status = "disabled";
};
+ aon_pm_l2_intc: interrupt-controller@408440 {
+ compatible = "brcm,l2-intc";
+ reg = <0x408440 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <49>;
+ brcm,irq-can-wake;
+ };
+
+ upg_gio: gpio@406700 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x406700 0x80>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_irq0_intc>;
+ interrupts = <6>;
+ brcm,gpio-bank-widths = <32 32 32 21>;
+ };
+
+ upg_gio_aon: gpio@4094c0 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x4094c0 0x40>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_aon_irq0_intc>;
+ interrupts = <6>;
+ interrupts-extended = <&upg_aon_irq0_intc 6>,
+ <&aon_pm_l2_intc 5>;
+ wakeup-source;
+ brcm,gpio-bank-widths = <18 4>;
+ };
+
enet0: ethernet@b80000 {
phy-mode = "internal";
phy-handle = <&phy1>;
diff --git a/arch/mips/boot/dts/brcm/bcm7435.dtsi b/arch/mips/boot/dts/brcm/bcm7435.dtsi
index 7801169416e7..b7bb1024089c 100644
--- a/arch/mips/boot/dts/brcm/bcm7435.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7435.dtsi
@@ -246,6 +246,43 @@
status = "disabled";
};
+ aon_pm_l2_intc: interrupt-controller@408440 {
+ compatible = "brcm,l2-intc";
+ reg = <0x408440 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <54>;
+ brcm,irq-can-wake;
+ };
+
+ upg_gio: gpio@406700 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x406700 0x80>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_irq0_intc>;
+ interrupts = <6>;
+ brcm,gpio-bank-widths = <32 32 32 21>;
+ };
+
+ upg_gio_aon: gpio@4094c0 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x4094c0 0x40>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_aon_irq0_intc>;
+ interrupts = <6>;
+ interrupts-extended = <&upg_aon_irq0_intc 6>,
+ <&aon_pm_l2_intc 5>;
+ wakeup-source;
+ brcm,gpio-bank-widths = <18 4>;
+ };
+
enet0: ethernet@b80000 {
phy-mode = "internal";
phy-handle = <&phy1>;
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-08-19 2:52 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-19 2:52 [v4 0/5] Add device nodes for BCM7xxx SoCs Jaedon Shin
[not found] ` <20160819025230.31882-1-jaedon.shin-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-08-19 2:52 ` [v4 1/5] MIPS: BMIPS: Add support PWM device nodes Jaedon Shin
2016-08-19 2:52 ` Jaedon Shin [this message]
2016-08-19 2:52 ` [v4 3/5] MIPS: BMIPS: Add support SDHCI " Jaedon Shin
2016-08-19 2:52 ` [v4 4/5] MIPS: BMIPS: Add support NAND " Jaedon Shin
2016-08-19 2:52 ` [v4 5/5] MIPS: BMIPS: Use interrupt-controller node name Jaedon Shin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160819025230.31882-3-jaedon.shin@gmail.com \
--to=jaedon.shin-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=cernekee-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=jonas.gorski-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-mips-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org \
--cc=ralf-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).