[PATCH v2 0/7] aspeed: Integrate pinctrl and gpio drivers

[PATCH v2 0/7] aspeed: Integrate pinctrl and gpio drivers

[Andrew Jeffery]

Hi all,

This series contains the SoC-related patches of the Aspeed pinctrl and gpio
drivers. The v2 has been split out from the original monolithic series found at:

  https://lkml.org/lkml/2016/7/20/69 

The combined series has been tested with both the AST2400 (g4) and AST2500 (g5)
SoCs on OpenPOWER Palmetto and Aspeed AST2500 EVB machines respectively, and
similarly in QEMU with the palmetto-bmc and ast2500-evb machines[1].

Cheers,

Andrew

Andrew Jeffery (7):
  mach-aspeed: Select pinctrl drivers
  mach-aspeed: Select GPIO driver
  aspeed-g4: Add syscon and pin controller nodes
  palmetto: Request relevant mux functions in devicetree
  aspeed-g4: Add gpio controller to devicetree
  aspeed-g5: Add syscon and pin controller nodes
  aspeed-g5: Add gpio controller to devicetree

 arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts |  14 +
 arch/arm/boot/dts/aspeed-g4.dtsi              | 429 ++++++++++++++++++++++++++
 arch/arm/boot/dts/aspeed-g5.dtsi              | 213 +++++++++++++
 arch/arm/mach-aspeed/Kconfig                  |   5 +
 4 files changed, 661 insertions(+)

-- 
2.9.3

[PATCH v2 1/7] mach-aspeed: Select pinctrl drivers

[Andrew Jeffery]

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---
 arch/arm/mach-aspeed/Kconfig | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/mach-aspeed/Kconfig b/arch/arm/mach-aspeed/Kconfig
index 5225fbcb250d..25a0ae01429e 100644
--- a/arch/arm/mach-aspeed/Kconfig
+++ b/arch/arm/mach-aspeed/Kconfig
@@ -5,6 +5,7 @@ menuconfig ARCH_ASPEED
 	select WATCHDOG
 	select ASPEED_WATCHDOG
 	select MOXART_TIMER
+	select PINCTRL
 	help
 	  Say Y here if you want to run your kernel on an ASpeed BMC SoC.
 
@@ -14,6 +15,7 @@ config MACH_ASPEED_G4
 	bool "Aspeed SoC 4th Generation"
 	depends on ARCH_MULTI_V5
 	select CPU_ARM926T
+	select PINCTRL_ASPEED_G4
 	help
 	 Say yes if you intend to run on an Aspeed ast2400 or similar
 	 fourth generation BMCs, such as those used by OpenPower Power8
@@ -23,6 +25,7 @@ config MACH_ASPEED_G5
 	bool "Aspeed SoC 5th Generation"
 	depends on ARCH_MULTI_V6
 	select CPU_V6
+	select PINCTRL_ASPEED_G5
 	help
 	 Say yes if you intend to run on an Aspeed ast2500 or similar
 	 fifth generation Aspeed BMCs.
-- 
2.9.3

[PATCH v2 2/7] mach-aspeed: Select GPIO driver

[Andrew Jeffery]

Signed-off-by: Andrew Jeffery <andrew-zrmu5oMJ5Fs@public.gmane.org>
---
 arch/arm/mach-aspeed/Kconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/mach-aspeed/Kconfig b/arch/arm/mach-aspeed/Kconfig
index 25a0ae01429e..8d2f8ed890ce 100644
--- a/arch/arm/mach-aspeed/Kconfig
+++ b/arch/arm/mach-aspeed/Kconfig
@@ -6,6 +6,8 @@ menuconfig ARCH_ASPEED
 	select ASPEED_WATCHDOG
 	select MOXART_TIMER
 	select PINCTRL
+	select GPIOLIB
+	select GPIO_ASPEED
 	help
 	  Say Y here if you want to run your kernel on an ASpeed BMC SoC.
 
-- 
2.9.3

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 3/7] aspeed-g4: Add syscon and pin controller nodes

[Andrew Jeffery]

The pin controller's child nodes expose the functions currently
implemented in the the g4 pin controller driver.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---

Since v1:

* Add nodes for new mux functions in the g4 driver
* Sort nodes alphabetically for sanity

 arch/arm/boot/dts/aspeed-g4.dtsi | 420 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 420 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 22dee5937d5c..c2ab63c621c0 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -54,6 +54,426 @@
 				clocks = <&clk_clkin>;
 			};
 
+			syscon: syscon@1e6e2000 {
+				compatible = "aspeed,g4-scu", "syscon", "simple-mfd";
+				reg = <0x1e6e2000 0x1a8>;
+
+				pinctrl: pinctrl@1e6e2000 {
+					compatible = "aspeed,g4-pinctrl";
+
+					pinctrl_acpi_default: acpi_default {
+						function = "ACPI";
+						groups = "ACPI";
+					};
+
+					pinctrl_bmcint_default: bmcint_default {
+						function = "BMCINT";
+						groups = "BMCINT";
+					};
+
+					pinctrl_ddcclk_default: ddcclk_default {
+						function = "DDCCLK";
+						groups = "DDCCLK";
+					};
+
+					pinctrl_ddcdat_default: ddcdat_default {
+						function = "DDCDAT";
+						groups = "DDCDAT";
+					};
+
+					pinctrl_flack_default: flack_default {
+						function = "FLACK";
+						groups = "FLACK";
+					};
+
+					pinctrl_flbusy_default: flbusy_default {
+						function = "FLBUSY";
+						groups = "FLBUSY";
+					};
+
+					pinctrl_flwp_default: flwp_default {
+						function = "FLWP";
+						groups = "FLWP";
+					};
+
+					pinctrl_gpid0_default: gpid0_default {
+						function = "GPID0";
+						groups = "GPID0";
+					};
+
+					pinctrl_gpie0_default: gpie0_default {
+						function = "GPIE0";
+						groups = "GPIE0";
+					};
+
+					pinctrl_gpie2_default: gpie2_default {
+						function = "GPIE2";
+						groups = "GPIE2";
+					};
+
+					pinctrl_gpie4_default: gpie4_default {
+						function = "GPIE4";
+						groups = "GPIE4";
+					};
+
+					pinctrl_gpie6_default: gpie6_default {
+						function = "GPIE6";
+						groups = "GPIE6";
+					};
+
+					pinctrl_i2c10_default: i2c10_default {
+						function = "I2C10";
+						groups = "I2C10";
+					};
+
+					pinctrl_i2c11_default: i2c11_default {
+						function = "I2C11";
+						groups = "I2C11";
+					};
+
+					pinctrl_i2c12_default: i2c12_default {
+						function = "I2C12";
+						groups = "I2C12";
+					};
+
+					pinctrl_i2c13_default: i2c13_default {
+						function = "I2C13";
+						groups = "I2C13";
+					};
+
+					pinctrl_i2c3_default: i2c3_default {
+						function = "I2C3";
+						groups = "I2C3";
+					};
+
+					pinctrl_i2c4_default: i2c4_default {
+						function = "I2C4";
+						groups = "I2C4";
+					};
+
+					pinctrl_i2c5_default: i2c5_default {
+						function = "I2C5";
+						groups = "I2C5";
+					};
+
+					pinctrl_i2c6_default: i2c6_default {
+						function = "I2C6";
+						groups = "I2C6";
+					};
+
+					pinctrl_i2c7_default: i2c7_default {
+						function = "I2C7";
+						groups = "I2C7";
+					};
+
+					pinctrl_i2c8_default: i2c8_default {
+						function = "I2C8";
+						groups = "I2C8";
+					};
+
+					pinctrl_i2c9_default: i2c9_default {
+						function = "I2C9";
+						groups = "I2C9";
+					};
+
+					pinctrl_lpcpd_default: lpcpd_default {
+						function = "LPCPD";
+						groups = "LPCPD";
+					};
+
+					pinctrl_lpcpme_default: lpcpme_default {
+						function = "LPCPME";
+						groups = "LPCPME";
+					};
+
+					pinctrl_lpcsmi_default: lpcsmi_default {
+						function = "LPCSMI";
+						groups = "LPCSMI";
+					};
+
+					pinctrl_mdio1_default: mdio1_default {
+						function = "MDIO1";
+						groups = "MDIO1";
+					};
+
+					pinctrl_mdio2_default: mdio2_default {
+						function = "MDIO2";
+						groups = "MDIO2";
+					};
+
+					pinctrl_ncts1_default: ncts1_default {
+						function = "NCTS1";
+						groups = "NCTS1";
+					};
+
+					pinctrl_ncts3_default: ncts3_default {
+						function = "NCTS3";
+						groups = "NCTS3";
+					};
+
+					pinctrl_ncts4_default: ncts4_default {
+						function = "NCTS4";
+						groups = "NCTS4";
+					};
+
+					pinctrl_ndcd1_default: ndcd1_default {
+						function = "NDCD1";
+						groups = "NDCD1";
+					};
+
+					pinctrl_ndcd3_default: ndcd3_default {
+						function = "NDCD3";
+						groups = "NDCD3";
+					};
+
+					pinctrl_ndcd4_default: ndcd4_default {
+						function = "NDCD4";
+						groups = "NDCD4";
+					};
+
+					pinctrl_ndsr1_default: ndsr1_default {
+						function = "NDSR1";
+						groups = "NDSR1";
+					};
+
+					pinctrl_ndsr3_default: ndsr3_default {
+						function = "NDSR3";
+						groups = "NDSR3";
+					};
+
+					pinctrl_ndtr1_default: ndtr1_default {
+						function = "NDTR1";
+						groups = "NDTR1";
+					};
+
+					pinctrl_ndtr3_default: ndtr3_default {
+						function = "NDTR3";
+						groups = "NDTR3";
+					};
+
+					pinctrl_nri1_default: nri1_default {
+						function = "NRI1";
+						groups = "NRI1";
+					};
+
+					pinctrl_nri3_default: nri3_default {
+						function = "NRI3";
+						groups = "NRI3";
+					};
+
+					pinctrl_nri4_default: nri4_default {
+						function = "NRI4";
+						groups = "NRI4";
+					};
+
+					pinctrl_nrts1_default: nrts1_default {
+						function = "NRTS1";
+						groups = "NRTS1";
+					};
+
+					pinctrl_nrts3_default: nrts3_default {
+						function = "NRTS3";
+						groups = "NRTS3";
+					};
+
+					pinctrl_pwm0_default: pwm0_default {
+						function = "PWM0";
+						groups = "PWM0";
+					};
+
+					pinctrl_pwm1_default: pwm1_default {
+						function = "PWM1";
+						groups = "PWM1";
+					};
+
+					pinctrl_pwm2_default: pwm2_default {
+						function = "PWM2";
+						groups = "PWM2";
+					};
+
+					pinctrl_pwm3_default: pwm3_default {
+						function = "PWM3";
+						groups = "PWM3";
+					};
+
+					pinctrl_pwm4_default: pwm4_default {
+						function = "PWM4";
+						groups = "PWM4";
+					};
+
+					pinctrl_pwm5_default: pwm5_default {
+						function = "PWM5";
+						groups = "PWM5";
+					};
+
+					pinctrl_pwm6_default: pwm6_default {
+						function = "PWM6";
+						groups = "PWM6";
+					};
+
+					pinctrl_pwm7_default: pwm7_default {
+						function = "PWM7";
+						groups = "PWM7";
+					};
+
+					pinctrl_rgmii1_default: rgmii1_default {
+						function = "RGMII1";
+						groups = "RGMII1";
+					};
+
+					pinctrl_rmii1_default: rmii1_default {
+						function = "RMII1";
+						groups = "RMII1";
+					};
+
+					pinctrl_rom16_default: rom16_default {
+						function = "ROM16";
+						groups = "ROM16";
+					};
+
+					pinctrl_rom8_default: rom8_default {
+						function = "ROM8";
+						groups = "ROM8";
+					};
+
+					pinctrl_romcs1_default: romcs1_default {
+						function = "ROMCS1";
+						groups = "ROMCS1";
+					};
+
+					pinctrl_romcs2_default: romcs2_default {
+						function = "ROMCS2";
+						groups = "ROMCS2";
+					};
+
+					pinctrl_romcs3_default: romcs3_default {
+						function = "ROMCS3";
+						groups = "ROMCS3";
+					};
+
+					pinctrl_romcs4_default: romcs4_default {
+						function = "ROMCS4";
+						groups = "ROMCS4";
+					};
+
+					pinctrl_rxd1_default: rxd1_default {
+						function = "RXD1";
+						groups = "RXD1";
+					};
+
+					pinctrl_rxd3_default: rxd3_default {
+						function = "RXD3";
+						groups = "RXD3";
+					};
+
+					pinctrl_rxd4_default: rxd4_default {
+						function = "RXD4";
+						groups = "RXD4";
+					};
+
+					pinctrl_sd1_default: sd1_default {
+						function = "SD1";
+						groups = "SD1";
+					};
+
+					pinctrl_sgpmi_default: sgpmi_default {
+						function = "SGPMI";
+						groups = "SGPMI";
+					};
+
+					pinctrl_siopbi_default: siopbi_default {
+						function = "SIOPBI";
+						groups = "SIOPBI";
+					};
+
+					pinctrl_siopbo_default: siopbo_default {
+						function = "SIOPBO";
+						groups = "SIOPBO";
+					};
+
+					pinctrl_timer3_default: timer3_default {
+						function = "TIMER3";
+						groups = "TIMER3";
+					};
+
+					pinctrl_timer5_default: timer5_default {
+						function = "TIMER5";
+						groups = "TIMER5";
+					};
+
+					pinctrl_timer6_default: timer6_default {
+						function = "TIMER6";
+						groups = "TIMER6";
+					};
+
+					pinctrl_timer7_default: timer7_default {
+						function = "TIMER7";
+						groups = "TIMER7";
+					};
+
+					pinctrl_timer8_default: timer8_default {
+						function = "TIMER8";
+						groups = "TIMER8";
+					};
+
+					pinctrl_txd1_default: txd1_default {
+						function = "TXD1";
+						groups = "TXD1";
+					};
+
+					pinctrl_txd3_default: txd3_default {
+						function = "TXD3";
+						groups = "TXD3";
+					};
+
+					pinctrl_txd4_default: txd4_default {
+						function = "TXD4";
+						groups = "TXD4";
+					};
+
+					pinctrl_uart6_default: uart6_default {
+						function = "UART6";
+						groups = "UART6";
+					};
+
+					pinctrl_vgahs_default: vgahs_default {
+						function = "VGAHS";
+						groups = "VGAHS";
+					};
+
+					pinctrl_vgavs_default: vgavs_default {
+						function = "VGAVS";
+						groups = "VGAVS";
+					};
+
+					pinctrl_vpi18_default: vpi18_default {
+						function = "VPI18";
+						groups = "VPI18";
+					};
+
+					pinctrl_vpi24_default: vpi24_default {
+						function = "VPI24";
+						groups = "VPI24";
+					};
+
+					pinctrl_vpi30_default: vpi30_default {
+						function = "VPI30";
+						groups = "VPI30";
+					};
+
+					pinctrl_vpo12_default: vpo12_default {
+						function = "VPO12";
+						groups = "VPO12";
+					};
+
+					pinctrl_vpo24_default: vpo24_default {
+						function = "VPO24";
+						groups = "VPO24";
+					};
+
+				};
+			};
+
 			clk_apb: clk_apb@1e6e2008 {
 				#clock-cells = <0>;
 				compatible = "aspeed,g4-apb-clock";
-- 
2.9.3

[PATCH v2 4/7] palmetto: Request relevant mux functions in devicetree

[Andrew Jeffery]

The requested functions are parented by the pinctrl node to provide the
Palmetto's static pin configuration.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---

Since v1:

* Remove some unnecessary mux requests

 arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
index cc5fcf2940bf..648fb6b9e427 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
@@ -20,6 +20,20 @@
 	};
 };
 
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flbusy_default &pinctrl_flwp_default
+			&pinctrl_vgahs_default &pinctrl_vgavs_default
+			&pinctrl_ddcclk_default &pinctrl_ddcdat_default
+
+			&pinctrl_pwm1_default &pinctrl_pwm2_default
+			&pinctrl_pwm3_default &pinctrl_pwm4_default
+			&pinctrl_pwm5_default &pinctrl_pwm6_default
+			&pinctrl_pwm7_default
+
+			&pinctrl_bmcint_default &pinctrl_flack_default>;
+};
+
 &uart5 {
 	status = "okay";
 };
-- 
2.9.3

[PATCH v2 5/7] aspeed-g4: Add gpio controller to devicetree

[Andrew Jeffery]

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---
 arch/arm/boot/dts/aspeed-g4.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index c2ab63c621c0..9a4a9e998e71 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -492,6 +492,15 @@
 				reg = <0x1e720000 0x8000>;	// 32K
 			};
 
+			gpio: gpio@1e780000 {
+				#gpio-cells = <2>;
+				gpio-controller;
+				compatible = "aspeed,ast2400-gpio";
+				reg = <0x1e780000 0x1000>;
+				interrupts = <20>;
+				gpio-ranges = <&pinctrl 0 0 220>;
+			};
+
 			timer: timer@1e782000 {
 				compatible = "aspeed,ast2400-timer";
 				reg = <0x1e782000 0x90>;
-- 
2.9.3

[PATCH v2 6/7] aspeed-g5: Add syscon and pin controller nodes

[Andrew Jeffery]

The pin controller's child nodes expose the functions currently
implemented in the g5 pin controller driver.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---

Since v1:

* Add nodes for new mux functions in the g5 driver
* Sort nodes alphabetically for sanity

 arch/arm/boot/dts/aspeed-g5.dtsi | 204 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 204 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index dd94d9361fda..ae5871a11a70 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -44,6 +44,210 @@
 				reg = <0x1e6e2070 0x04>;
 			};
 
+			syscon: syscon@1e6e2000 {
+				compatible = "aspeed,g5-scu", "syscon", "simple-mfd";
+				reg = <0x1e6e2000 0x1a8>;
+
+				pinctrl: pinctrl@1e6e2000 {
+					compatible = "aspeed,g5-pinctrl";
+
+					pinctrl_gpid0_default: gpid0_default {
+						function = "GPID0";
+						groups = "GPID0";
+					};
+
+					pinctrl_gpid2_default: gpid2_default {
+						function = "GPID2";
+						groups = "GPID2";
+					};
+
+					pinctrl_gpie0_default: gpie0_default {
+						function = "GPIE0";
+						groups = "GPIE0";
+					};
+
+					pinctrl_i2c10_default: i2c10_default {
+						function = "I2C10";
+						groups = "I2C10";
+					};
+
+					pinctrl_i2c11_default: i2c11_default {
+						function = "I2C11";
+						groups = "I2C11";
+					};
+
+					pinctrl_i2c12_default: i2c12_default {
+						function = "I2C12";
+						groups = "I2C12";
+					};
+
+					pinctrl_i2c13_default: i2c13_default {
+						function = "I2C13";
+						groups = "I2C13";
+					};
+
+					pinctrl_i2c14_default: i2c14_default {
+						function = "I2C14";
+						groups = "I2C14";
+					};
+
+					pinctrl_i2c3_default: i2c3_default {
+						function = "I2C3";
+						groups = "I2C3";
+					};
+
+					pinctrl_i2c4_default: i2c4_default {
+						function = "I2C4";
+						groups = "I2C4";
+					};
+
+					pinctrl_i2c5_default: i2c5_default {
+						function = "I2C5";
+						groups = "I2C5";
+					};
+
+					pinctrl_i2c6_default: i2c6_default {
+						function = "I2C6";
+						groups = "I2C6";
+					};
+
+					pinctrl_i2c7_default: i2c7_default {
+						function = "I2C7";
+						groups = "I2C7";
+					};
+
+					pinctrl_i2c8_default: i2c8_default {
+						function = "I2C8";
+						groups = "I2C8";
+					};
+
+					pinctrl_i2c9_default: i2c9_default {
+						function = "I2C9";
+						groups = "I2C9";
+					};
+
+					pinctrl_mac1link_default: mac1link_default {
+						function = "MAC1LINK";
+						groups = "MAC1LINK";
+					};
+
+					pinctrl_mdio1_default: mdio1_default {
+						function = "MDIO1";
+						groups = "MDIO1";
+					};
+
+					pinctrl_mdio2_default: mdio2_default {
+						function = "MDIO2";
+						groups = "MDIO2";
+					};
+
+					pinctrl_oscclk_default: oscclk_default {
+						function = "OSCCLK";
+						groups = "OSCCLK";
+					};
+
+					pinctrl_pewake_default: pewake_default {
+						function = "PEWAKE";
+						groups = "PEWAKE";
+					};
+
+					pinctrl_pwm0_default: pwm0_default {
+						function = "PWM0";
+						groups = "PWM0";
+					};
+
+					pinctrl_pwm1_default: pwm1_default {
+						function = "PWM1";
+						groups = "PWM1";
+					};
+
+					pinctrl_pwm2_default: pwm2_default {
+						function = "PWM2";
+						groups = "PWM2";
+					};
+
+					pinctrl_pwm3_default: pwm3_default {
+						function = "PWM3";
+						groups = "PWM3";
+					};
+
+					pinctrl_pwm4_default: pwm4_default {
+						function = "PWM4";
+						groups = "PWM4";
+					};
+
+					pinctrl_pwm5_default: pwm5_default {
+						function = "PWM5";
+						groups = "PWM5";
+					};
+
+					pinctrl_pwm6_default: pwm6_default {
+						function = "PWM6";
+						groups = "PWM6";
+					};
+
+					pinctrl_pwm7_default: pwm7_default {
+						function = "PWM7";
+						groups = "PWM7";
+					};
+
+					pinctrl_rgmii1_default: rgmii1_default {
+						function = "RGMII1";
+						groups = "RGMII1";
+					};
+
+					pinctrl_rgmii2_default: rgmii2_default {
+						function = "RGMII2";
+						groups = "RGMII2";
+					};
+
+					pinctrl_rmii1_default: rmii1_default {
+						function = "RMII1";
+						groups = "RMII1";
+					};
+
+					pinctrl_rmii2_default: rmii2_default {
+						function = "RMII2";
+						groups = "RMII2";
+					};
+
+					pinctrl_sd1_default: sd1_default {
+						function = "SD1";
+						groups = "SD1";
+					};
+
+					pinctrl_spi1_default: spi1_default {
+						function = "SPI1";
+						groups = "SPI1";
+					};
+
+					pinctrl_timer4_default: timer4_default {
+						function = "TIMER4";
+						groups = "TIMER4";
+					};
+
+					pinctrl_timer5_default: timer5_default {
+						function = "TIMER5";
+						groups = "TIMER5";
+					};
+
+					pinctrl_timer6_default: timer6_default {
+						function = "TIMER6";
+						groups = "TIMER6";
+					};
+
+					pinctrl_timer7_default: timer7_default {
+						function = "TIMER7";
+						groups = "TIMER7";
+					};
+
+					pinctrl_timer8_default: timer8_default {
+						function = "TIMER8";
+						groups = "TIMER8";
+					};
+				};
+			};
+
 			clk_hpll: clk_hpll@1e6e2024 {
 				#clock-cells = <0>;
 				compatible = "aspeed,g5-hpll-clock";
-- 
2.9.3

[PATCH v2 7/7] aspeed-g5: Add gpio controller to devicetree

[Andrew Jeffery]

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---

Since v1:

* Use aspeed,ast2500-gpio compatible string

 arch/arm/boot/dts/aspeed-g5.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index ae5871a11a70..318e1deafe30 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -280,6 +280,15 @@
 				reg = <0x1e720000 0x9000>;	// 36K
 			};
 
+			gpio: gpio@1e780000 {
+				#gpio-cells = <2>;
+				gpio-controller;
+				compatible = "aspeed,ast2500-gpio";
+				reg = <0x1e780000 0x1000>;
+				interrupts = <20>;
+				gpio-ranges = <&pinctrl 0 0 220>;
+			};
+
 			timer: timer@1e782000 {
 				compatible = "aspeed,ast2400-timer";
 				reg = <0x1e782000 0x90>;
-- 
2.9.3