[PATCH 1/2] dt-bindings: mxsfb: Add bindings for the MXSFB KMS/DRM driver

[Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>]

Add DT bindings for new MXSFB driver using the DRM framework.
The old MXSFB fbdev driver bindings are preserved in mxsfb.txt .

Signed-off-by: Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Lucas Stach <l.stach-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Cc: Fabio Estevam <fabio.estevam-3arQi8VN3Tc@public.gmane.org>
Cc: Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 .../devicetree/bindings/display/mxsfb-drm.txt      | 33 ++++++++++++++++++++++
 1 file changed, 33 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/mxsfb-drm.txt

diff --git a/Documentation/devicetree/bindings/display/mxsfb-drm.txt b/Documentation/devicetree/bindings/display/mxsfb-drm.txt
new file mode 100644
index 0000000..e70d337
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mxsfb-drm.txt
@@ -0,0 +1,33 @@
+* Freescale MXS LCD Interface (LCDIF) with KMS/DRM support
+
+Required properties:
+- compatible:	Should be "fsl,imx23-lcdif" for i.MX23.
+		Should be "fsl,imx28-lcdif" for i.MX28 and i.MX6SX.
+- reg:		Address and length of the register set for lcdif
+- interrupts:	Should contain lcdif interrupts
+- clocks:	A list of phandle + clock-specifier pairs, one for each
+		entry in 'clock-names'.
+- clock-names:	A list of clock names. For MXSFB it should contain:
+    - "pix" for the MXSFB block clock
+    - (optional) "axi", "disp_axi" for the bus interface clock on MX6SX
+
+Required sub-nodes:
+  - port: The connection to an encoder chip.
+
+Example:
+
+	lcdif1: lcdif@02220000 {
+		compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif";
+		reg = <0x02220000 0x4000>;
+		interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>,
+			 <&clks IMX6SX_CLK_LCDIF_APB>,
+			 <&clks IMX6SX_CLK_DISPLAY_AXI>;
+		clock-names = "pix", "axi", "disp_axi";
+
+		port {
+			parallel_out: endpoint {
+				remote-endpoint = <&panel_in_parallel>;
+			};
+		};
+	};
-- 
2.9.3

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html