From mboxrd@z Thu Jan 1 00:00:00 1970 From: Shawn Guo Subject: Re: [PATCH V2] ARM: dts: imx6ul iomuxc syscon is compatible to imx6q Date: Mon, 29 Aug 2016 23:20:06 +0800 Message-ID: <20160829152006.GZ30790@tiger> References: <1472480743-8405-1-git-send-email-Anson.Huang@nxp.com> <20160829143447.GV30790@tiger> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Yongcai Huang Cc: "mark.rutland-5wv7dgnIgG8@public.gmane.org" , "devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org" , "linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org" , "linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org" , "robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org" , "kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org" , Fabio Estevam , "linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org" List-Id: devicetree@vger.kernel.org On Mon, Aug 29, 2016 at 02:44:47PM +0000, Yongcai Huang wrote: > This patch is to set the GINT bit for all low power mode transition. > > Do we decide to go with PSCI for all i.MX6 SoCs? Currently i.MX6UL's suspend is > already supported with non-PCSI method, only i.MX7D uses PSCI, right? If we decide > to implement all power management feature with PSCI, then yes, all these changes > can be put into PSCI. But since current suspend/cpuidle function are already supported > using old method, this bit must be set to avoid system goes into low power mode > unexpected. My apology. I messed up it with i.MX7D. Patch applied, thanks. Shawn -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html