From: Andrew Jeffery <andrew-zrmu5oMJ5Fs@public.gmane.org>
To: Joel Stanley <joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
Cc: Russell King <linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Benjamin Herrenschmidt
<benh-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r@public.gmane.org>,
Jeremy Kerr <jk-mnsaURCQ41sdnm+yROfE0A@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Andrew Jeffery <andrew-zrmu5oMJ5Fs@public.gmane.org>
Subject: [PATCH v3 3/7] aspeed-g4: Add syscon and pin controller nodes
Date: Tue, 30 Aug 2016 17:25:56 +0930 [thread overview]
Message-ID: <20160830075600.11559-4-andrew@aj.id.au> (raw)
In-Reply-To: <20160830075600.11559-1-andrew-zrmu5oMJ5Fs@public.gmane.org>
The pin controller's child nodes expose the functions currently
implemented in the the g4 pin controller driver.
Signed-off-by: Andrew Jeffery <andrew-zrmu5oMJ5Fs@public.gmane.org>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 420 +++++++++++++++++++++++++++++++++++++++
1 file changed, 420 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 22dee5937d5c..a5d6e81e318a 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -54,6 +54,426 @@
clocks = <&clk_clkin>;
};
+ syscon: syscon@1e6e2000 {
+ compatible = "aspeed,g4-scu", "syscon", "simple-mfd";
+ reg = <0x1e6e2000 0x1a8>;
+
+ pinctrl: pinctrl {
+ compatible = "aspeed,g4-pinctrl";
+
+ pinctrl_acpi_default: acpi_default {
+ function = "ACPI";
+ groups = "ACPI";
+ };
+
+ pinctrl_bmcint_default: bmcint_default {
+ function = "BMCINT";
+ groups = "BMCINT";
+ };
+
+ pinctrl_ddcclk_default: ddcclk_default {
+ function = "DDCCLK";
+ groups = "DDCCLK";
+ };
+
+ pinctrl_ddcdat_default: ddcdat_default {
+ function = "DDCDAT";
+ groups = "DDCDAT";
+ };
+
+ pinctrl_flack_default: flack_default {
+ function = "FLACK";
+ groups = "FLACK";
+ };
+
+ pinctrl_flbusy_default: flbusy_default {
+ function = "FLBUSY";
+ groups = "FLBUSY";
+ };
+
+ pinctrl_flwp_default: flwp_default {
+ function = "FLWP";
+ groups = "FLWP";
+ };
+
+ pinctrl_gpid0_default: gpid0_default {
+ function = "GPID0";
+ groups = "GPID0";
+ };
+
+ pinctrl_gpie0_default: gpie0_default {
+ function = "GPIE0";
+ groups = "GPIE0";
+ };
+
+ pinctrl_gpie2_default: gpie2_default {
+ function = "GPIE2";
+ groups = "GPIE2";
+ };
+
+ pinctrl_gpie4_default: gpie4_default {
+ function = "GPIE4";
+ groups = "GPIE4";
+ };
+
+ pinctrl_gpie6_default: gpie6_default {
+ function = "GPIE6";
+ groups = "GPIE6";
+ };
+
+ pinctrl_i2c10_default: i2c10_default {
+ function = "I2C10";
+ groups = "I2C10";
+ };
+
+ pinctrl_i2c11_default: i2c11_default {
+ function = "I2C11";
+ groups = "I2C11";
+ };
+
+ pinctrl_i2c12_default: i2c12_default {
+ function = "I2C12";
+ groups = "I2C12";
+ };
+
+ pinctrl_i2c13_default: i2c13_default {
+ function = "I2C13";
+ groups = "I2C13";
+ };
+
+ pinctrl_i2c3_default: i2c3_default {
+ function = "I2C3";
+ groups = "I2C3";
+ };
+
+ pinctrl_i2c4_default: i2c4_default {
+ function = "I2C4";
+ groups = "I2C4";
+ };
+
+ pinctrl_i2c5_default: i2c5_default {
+ function = "I2C5";
+ groups = "I2C5";
+ };
+
+ pinctrl_i2c6_default: i2c6_default {
+ function = "I2C6";
+ groups = "I2C6";
+ };
+
+ pinctrl_i2c7_default: i2c7_default {
+ function = "I2C7";
+ groups = "I2C7";
+ };
+
+ pinctrl_i2c8_default: i2c8_default {
+ function = "I2C8";
+ groups = "I2C8";
+ };
+
+ pinctrl_i2c9_default: i2c9_default {
+ function = "I2C9";
+ groups = "I2C9";
+ };
+
+ pinctrl_lpcpd_default: lpcpd_default {
+ function = "LPCPD";
+ groups = "LPCPD";
+ };
+
+ pinctrl_lpcpme_default: lpcpme_default {
+ function = "LPCPME";
+ groups = "LPCPME";
+ };
+
+ pinctrl_lpcsmi_default: lpcsmi_default {
+ function = "LPCSMI";
+ groups = "LPCSMI";
+ };
+
+ pinctrl_mdio1_default: mdio1_default {
+ function = "MDIO1";
+ groups = "MDIO1";
+ };
+
+ pinctrl_mdio2_default: mdio2_default {
+ function = "MDIO2";
+ groups = "MDIO2";
+ };
+
+ pinctrl_ncts1_default: ncts1_default {
+ function = "NCTS1";
+ groups = "NCTS1";
+ };
+
+ pinctrl_ncts3_default: ncts3_default {
+ function = "NCTS3";
+ groups = "NCTS3";
+ };
+
+ pinctrl_ncts4_default: ncts4_default {
+ function = "NCTS4";
+ groups = "NCTS4";
+ };
+
+ pinctrl_ndcd1_default: ndcd1_default {
+ function = "NDCD1";
+ groups = "NDCD1";
+ };
+
+ pinctrl_ndcd3_default: ndcd3_default {
+ function = "NDCD3";
+ groups = "NDCD3";
+ };
+
+ pinctrl_ndcd4_default: ndcd4_default {
+ function = "NDCD4";
+ groups = "NDCD4";
+ };
+
+ pinctrl_ndsr1_default: ndsr1_default {
+ function = "NDSR1";
+ groups = "NDSR1";
+ };
+
+ pinctrl_ndsr3_default: ndsr3_default {
+ function = "NDSR3";
+ groups = "NDSR3";
+ };
+
+ pinctrl_ndtr1_default: ndtr1_default {
+ function = "NDTR1";
+ groups = "NDTR1";
+ };
+
+ pinctrl_ndtr3_default: ndtr3_default {
+ function = "NDTR3";
+ groups = "NDTR3";
+ };
+
+ pinctrl_nri1_default: nri1_default {
+ function = "NRI1";
+ groups = "NRI1";
+ };
+
+ pinctrl_nri3_default: nri3_default {
+ function = "NRI3";
+ groups = "NRI3";
+ };
+
+ pinctrl_nri4_default: nri4_default {
+ function = "NRI4";
+ groups = "NRI4";
+ };
+
+ pinctrl_nrts1_default: nrts1_default {
+ function = "NRTS1";
+ groups = "NRTS1";
+ };
+
+ pinctrl_nrts3_default: nrts3_default {
+ function = "NRTS3";
+ groups = "NRTS3";
+ };
+
+ pinctrl_pwm0_default: pwm0_default {
+ function = "PWM0";
+ groups = "PWM0";
+ };
+
+ pinctrl_pwm1_default: pwm1_default {
+ function = "PWM1";
+ groups = "PWM1";
+ };
+
+ pinctrl_pwm2_default: pwm2_default {
+ function = "PWM2";
+ groups = "PWM2";
+ };
+
+ pinctrl_pwm3_default: pwm3_default {
+ function = "PWM3";
+ groups = "PWM3";
+ };
+
+ pinctrl_pwm4_default: pwm4_default {
+ function = "PWM4";
+ groups = "PWM4";
+ };
+
+ pinctrl_pwm5_default: pwm5_default {
+ function = "PWM5";
+ groups = "PWM5";
+ };
+
+ pinctrl_pwm6_default: pwm6_default {
+ function = "PWM6";
+ groups = "PWM6";
+ };
+
+ pinctrl_pwm7_default: pwm7_default {
+ function = "PWM7";
+ groups = "PWM7";
+ };
+
+ pinctrl_rgmii1_default: rgmii1_default {
+ function = "RGMII1";
+ groups = "RGMII1";
+ };
+
+ pinctrl_rmii1_default: rmii1_default {
+ function = "RMII1";
+ groups = "RMII1";
+ };
+
+ pinctrl_rom16_default: rom16_default {
+ function = "ROM16";
+ groups = "ROM16";
+ };
+
+ pinctrl_rom8_default: rom8_default {
+ function = "ROM8";
+ groups = "ROM8";
+ };
+
+ pinctrl_romcs1_default: romcs1_default {
+ function = "ROMCS1";
+ groups = "ROMCS1";
+ };
+
+ pinctrl_romcs2_default: romcs2_default {
+ function = "ROMCS2";
+ groups = "ROMCS2";
+ };
+
+ pinctrl_romcs3_default: romcs3_default {
+ function = "ROMCS3";
+ groups = "ROMCS3";
+ };
+
+ pinctrl_romcs4_default: romcs4_default {
+ function = "ROMCS4";
+ groups = "ROMCS4";
+ };
+
+ pinctrl_rxd1_default: rxd1_default {
+ function = "RXD1";
+ groups = "RXD1";
+ };
+
+ pinctrl_rxd3_default: rxd3_default {
+ function = "RXD3";
+ groups = "RXD3";
+ };
+
+ pinctrl_rxd4_default: rxd4_default {
+ function = "RXD4";
+ groups = "RXD4";
+ };
+
+ pinctrl_sd1_default: sd1_default {
+ function = "SD1";
+ groups = "SD1";
+ };
+
+ pinctrl_sgpmi_default: sgpmi_default {
+ function = "SGPMI";
+ groups = "SGPMI";
+ };
+
+ pinctrl_siopbi_default: siopbi_default {
+ function = "SIOPBI";
+ groups = "SIOPBI";
+ };
+
+ pinctrl_siopbo_default: siopbo_default {
+ function = "SIOPBO";
+ groups = "SIOPBO";
+ };
+
+ pinctrl_timer3_default: timer3_default {
+ function = "TIMER3";
+ groups = "TIMER3";
+ };
+
+ pinctrl_timer5_default: timer5_default {
+ function = "TIMER5";
+ groups = "TIMER5";
+ };
+
+ pinctrl_timer6_default: timer6_default {
+ function = "TIMER6";
+ groups = "TIMER6";
+ };
+
+ pinctrl_timer7_default: timer7_default {
+ function = "TIMER7";
+ groups = "TIMER7";
+ };
+
+ pinctrl_timer8_default: timer8_default {
+ function = "TIMER8";
+ groups = "TIMER8";
+ };
+
+ pinctrl_txd1_default: txd1_default {
+ function = "TXD1";
+ groups = "TXD1";
+ };
+
+ pinctrl_txd3_default: txd3_default {
+ function = "TXD3";
+ groups = "TXD3";
+ };
+
+ pinctrl_txd4_default: txd4_default {
+ function = "TXD4";
+ groups = "TXD4";
+ };
+
+ pinctrl_uart6_default: uart6_default {
+ function = "UART6";
+ groups = "UART6";
+ };
+
+ pinctrl_vgahs_default: vgahs_default {
+ function = "VGAHS";
+ groups = "VGAHS";
+ };
+
+ pinctrl_vgavs_default: vgavs_default {
+ function = "VGAVS";
+ groups = "VGAVS";
+ };
+
+ pinctrl_vpi18_default: vpi18_default {
+ function = "VPI18";
+ groups = "VPI18";
+ };
+
+ pinctrl_vpi24_default: vpi24_default {
+ function = "VPI24";
+ groups = "VPI24";
+ };
+
+ pinctrl_vpi30_default: vpi30_default {
+ function = "VPI30";
+ groups = "VPI30";
+ };
+
+ pinctrl_vpo12_default: vpo12_default {
+ function = "VPO12";
+ groups = "VPO12";
+ };
+
+ pinctrl_vpo24_default: vpo24_default {
+ function = "VPO24";
+ groups = "VPO24";
+ };
+
+ };
+ };
+
clk_apb: clk_apb@1e6e2008 {
#clock-cells = <0>;
compatible = "aspeed,g4-apb-clock";
--
2.9.3.1.g0db844e
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-08-30 7:55 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-30 7:55 [PATCH v3 0/7] aspeed: Integrate pinctrl and gpio drivers Andrew Jeffery
2016-08-30 7:55 ` [PATCH v3 1/7] mach-aspeed: Select pinctrl drivers Andrew Jeffery
2016-08-30 7:55 ` [PATCH v3 2/7] mach-aspeed: Select GPIO driver Andrew Jeffery
2016-09-13 12:43 ` Joel Stanley
2016-08-30 7:55 ` [PATCH v3 5/7] aspeed-g4: Add gpio controller to devicetree Andrew Jeffery
2016-08-30 7:55 ` [PATCH v3 6/7] aspeed-g5: Add syscon and pin controller nodes Andrew Jeffery
[not found] ` <20160830075600.11559-1-andrew-zrmu5oMJ5Fs@public.gmane.org>
2016-08-30 7:55 ` Andrew Jeffery [this message]
2016-08-30 7:55 ` [PATCH v3 4/7] palmetto: Request relevant mux functions in devicetree Andrew Jeffery
[not found] ` <20160830075600.11559-5-andrew-zrmu5oMJ5Fs@public.gmane.org>
2016-09-13 12:41 ` Joel Stanley
2016-09-13 20:58 ` Benjamin Herrenschmidt
[not found] ` <1473800295.8689.295.camel-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r@public.gmane.org>
2016-09-14 0:59 ` Joel Stanley
2016-08-30 7:56 ` [PATCH v3 7/7] aspeed-g5: Add gpio controller to devicetree Andrew Jeffery
2016-09-13 12:44 ` [PATCH v3 0/7] aspeed: Integrate pinctrl and gpio drivers Joel Stanley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160830075600.11559-4-andrew@aj.id.au \
--to=andrew-zrmu5omj5fs@public.gmane.org \
--cc=benh-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=jk-mnsaURCQ41sdnm+yROfE0A@public.gmane.org \
--cc=joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org \
--cc=linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).