From mboxrd@z Thu Jan 1 00:00:00 1970 From: Martin Blumenstingl Subject: [PATCH 7/7] ARM64: meson-gxbb-vega-s95: Enable USB Nodes Date: Sun, 4 Sep 2016 23:31:52 +0200 Message-ID: <20160904213152.25837-8-martin.blumenstingl@googlemail.com> References: <20160904213152.25837-1-martin.blumenstingl@googlemail.com> Return-path: In-Reply-To: <20160904213152.25837-1-martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, jbrunet-rdvid1DuHRBWk0Htik3J/w@public.gmane.org, johnyoun-HKixBCOQz3hWk0Htik3J/w@public.gmane.org, kishon-l0cyMroinI0@public.gmane.org, khilman-rdvid1DuHRBWk0Htik3J/w@public.gmane.org, carlo-KA+7E9HrN00dnm+yROfE0A@public.gmane.org Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org, mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org, will.deacon-5wv7dgnIgG8@public.gmane.org, catalin.marinas-5wv7dgnIgG8@public.gmane.org, gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org, mark.rutland-5wv7dgnIgG8@public.gmane.org, robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, Martin Blumenstingl List-Id: devicetree@vger.kernel.org Enable both gxbb USB controller and add a 5V regulator for the OTG port VBUS Signed-off-by: Martin Blumenstingl Signed-off-by: Jerome Brunet --- .../boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 30 ++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi index 463185d..bad32e6 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi @@ -77,6 +77,19 @@ compatible = "mmc-pwrseq-emmc"; reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; }; + + usb_vbus: regulator-usb0-vbus { + compatible = "regulator-fixed"; + + regulator-name = "USB0_VBUS"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + }; &uart_AO { @@ -133,3 +146,20 @@ vmmc-supply = <&vcc_3v3>; vmmcq-sumpply = <&vcc_1v8>; }; + +&usb0_phy { + status = "okay"; + phy-supply = <&usb_vbus>; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; -- 2.9.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html