* [PATCH 1/2] ARM: dts: add rockchip PX3 board
@ 2016-09-10 9:01 Andy Yan
2016-09-10 9:05 ` [PATCH 2/2] arm64: dts: rockchip: Add PX5 board Andy Yan
` (2 more replies)
0 siblings, 3 replies; 10+ messages in thread
From: Andy Yan @ 2016-09-10 9:01 UTC (permalink / raw)
To: heiko-4mtYJXux2i+zQB+pC5nmwQ
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
briannorris-F7+t8E8rja9g9hUCZPvPmw,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
Andy Yan
PX3 board is designed by Rockchip for automotive field,
which intergrated with CVBS(TP2825)/MIPI DSI/LVDS/HDMI
video input/output interface, WIFI/BT/GPS(on a module
named S500 which based on MT6620), Gsensor BMA250E and
light&proximity sensor STK3410.
Signed-off-by: Andy Yan <andy.yan-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
---
Documentation/devicetree/bindings/arm/rockchip.txt | 4 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/rk3188-px3.dts | 337 +++++++++++++++++++++
3 files changed, 342 insertions(+)
create mode 100644 arch/arm/boot/dts/rk3188-px3.dts
diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
index 6668645..e680105 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.txt
+++ b/Documentation/devicetree/bindings/arm/rockchip.txt
@@ -21,6 +21,10 @@ Rockchip platforms device tree bindings
Required root node properties:
- compatible = "radxa,rock", "rockchip,rk3188";
+- Rockchip PX3 board:
+ Required root node properties:
+ - compatible = "rockchip,px3", "rockchip,rk3188";
+
- Radxa Rock2 Square board:
Required root node properties:
- compatible = "radxa,rock2-square", "rockchip,rk3288";
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index faacd52..72cd3f5 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -620,6 +620,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3066a-marsboard.dtb \
rk3066a-rayeager.dtb \
rk3188-radxarock.dtb \
+ rk3188-px3.dtb \
rk3228-evb.dtb \
rk3229-evb.dtb \
rk3288-evb-act8846.dtb \
diff --git a/arch/arm/boot/dts/rk3188-px3.dts b/arch/arm/boot/dts/rk3188-px3.dts
new file mode 100644
index 0000000..ece45d7
--- /dev/null
+++ b/arch/arm/boot/dts/rk3188-px3.dts
@@ -0,0 +1,337 @@
+/*
+ * Copyright (c) 2016 Andy Yan <andy.yan-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "rk3188.dtsi"
+
+/ {
+ model = "Rockchip PX3";
+ compatible = "rockchip,px3", "rockchip,rk3188";
+
+ chosen {
+ bootargs = "console=ttyS2,115200 earlyprintk";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x60000000 0x80000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+
+ power {
+ gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ label = "GPIO Key Power";
+ linux,input-type = <1>;
+ wakeup-source;
+ debounce-interval = <100>;
+ };
+ };
+
+ vcc_sys: vsys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vsys";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ };
+};
+
+&cpu0 {
+ cpu0-supply = <&vdd_cpu>;
+};
+
+&i2c0 {
+ status = "okay";
+
+ /* Accelerometer */
+ bma250@18 {
+ compatible = "bma250";
+ reg = <0x18>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ stk3410@48 {
+ compatible = "STK3310";
+ reg = <0x48>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+ rk808: pmic@1c {
+ compatible = "rockchip,rk818";
+ reg = <0x1c>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+ rockchip,system-power-controller;
+ wakeup-source;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk808-clkout2";
+
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc6-supply = <&vcc_sys>;
+ vcc7-supply = <&vcc_sys>;
+ vcc8-supply = <&vcc_io>;
+ vcc9-supply = <&vcc_io>;
+
+ regulators {
+ vdd_cpu: DCDC_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-name = "vdd_arm";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: DCDC_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-name = "vdd_gpu";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_ddr";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_io: DCDC_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_io";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_cif: LDO_REG1 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_cif";
+ };
+
+ vcc_jetta33: LDO_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_jetta33";
+ };
+
+ vdd_10: LDO_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vdd_10";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ lvds_12: LDO_REG4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "lvds_12";
+ };
+
+ lvds_25: LDO_REG5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "lvds_25";
+ };
+
+ cif_18: LDO_REG6 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "cif_18";
+ };
+
+ vcc_sd: LDO_REG7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_sd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ wl_18: LDO_REG8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "wl_18";
+ };
+
+ lcd_33: SWITCH_REG1 {
+ regulator-name = "lcd_33";
+ };
+ };
+ };
+
+};
+
+&i2c2 {
+ gsl1680: touchscreen@40 {
+ compatible = "gsl1680";
+ reg = <0x40>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
+ power-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ touchscreen-size-x = <800>;
+ touchscreen-size-y = <1280>;
+ silead,max-fingers = <5>;
+ };
+};
+
+&emmc {
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ disable-wp;
+ non-removable;
+ num-slots = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_rst>;
+ status = "okay";
+};
+
+&mmc0 {
+ num-slots = <1>;
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
+ vmmc-supply = <&vcc_sd>;
+
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ disable-wp;
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&pwm3 {
+ status = "okay";
+};
+
+&pinctrl {
+ pcfg_output_low: pcfg-output-low {
+ output-low;
+ };
+
+ usb {
+ host_vbus_drv: host-vbus-drv {
+ rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ otg_vbus_drv: otg-vbus-drv {
+ rockchip,pins = <2 31 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
+&usb_host {
+ status = "okay";
+};
+
+&usb_otg {
+ status = "okay";
+};
+
+&wdt {
+ status = "okay";
+};
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH 2/2] arm64: dts: rockchip: Add PX5 board
2016-09-10 9:01 [PATCH 1/2] ARM: dts: add rockchip PX3 board Andy Yan
@ 2016-09-10 9:05 ` Andy Yan
[not found] ` <1473498094-16279-1-git-send-email-andy.yan-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2016-09-10 10:03 ` Heiko Stuebner
2 siblings, 0 replies; 10+ messages in thread
From: Andy Yan @ 2016-09-10 9:05 UTC (permalink / raw)
To: heiko
Cc: devicetree, briannorris, linux-kernel, robh+dt, mark.rutland,
Andy Yan
PX5 board is designed by Rockchip for automotive field,
which intergrated with CVBS(TP2825)/MIPI DSI/CSI/LVDS
HDMI video input/output interface, audio codec ES8396,
WIFI/BT(on RTL8723BS), Gsensor BMA250E and light&proximity
sensor STK3410.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
---
Documentation/devicetree/bindings/arm/rockchip.txt | 4 +
arch/arm64/boot/dts/rockchip/Makefile | 1 +
arch/arm64/boot/dts/rockchip/rk3368-px5.dts | 304 +++++++++++++++++++++
3 files changed, 309 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3368-px5.dts
diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
index e680105..06de682 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.txt
+++ b/Documentation/devicetree/bindings/arm/rockchip.txt
@@ -107,6 +107,10 @@ Rockchip platforms device tree bindings
Required root node properties:
- compatible = "rockchip,r88", "rockchip,rk3368";
+- Rockchip PX5 board:
+ Required root node properties:
+ - compatible = "rockchip,px5", "rockchip,rk3368";
+
- Rockchip RK3228 Evaluation board:
Required root node properties:
- compatible = "rockchip,rk3228-evb", "rockchip,rk3228";
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 7037a16..2fddf70 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -1,6 +1,7 @@
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-px5.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb
always := $(dtb-y)
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-px5.dts b/arch/arm64/boot/dts/rockchip/rk3368-px5.dts
new file mode 100644
index 0000000..d862667
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3368-px5.dts
@@ -0,0 +1,304 @@
+/*
+ * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3368.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Rockchip PX5";
+ compatible = "rockchip,px5", "rockchip,rk3368";
+
+ chosen {
+ stdout-path = "serial4:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ keys: gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwr_key>;
+
+ power {
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ label = "GPIO Power";
+ linux,code = <KEY_POWER>;
+ wakeup-source;
+ };
+ };
+
+ vcc_sys: vcc-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&emmc {
+ status = "okay";
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ clock-frequency = <150000000>;
+ disable-wp;
+ keep-power-in-suspend;
+ non-removable;
+ num-slots = <1>;
+ vmmc-supply = <&vcc_io>;
+ vqmmc-supply = <&vcc18_flash>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>;
+};
+
+&i2c0 {
+ status = "okay";
+
+ rk808: pmic@1b {
+ compatible = "rockchip,rk808";
+ reg = <0x1b>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int>, <&pmic_sleep>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+ rockchip,system-power-controller;
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc6-supply = <&vcc_sys>;
+ vcc7-supply = <&vcc_sys>;
+ vcc8-supply = <&vcc_io>;
+ vcc9-supply = <&vcc_sys>;
+ vcc10-supply = <&vcc_sys>;
+ vcc11-supply = <&vcc_sys>;
+ vcc12-supply = <&vcc_io>;
+ clock-output-names = "xin32k", "rk808-clkout2";
+ #clock-cells = <1>;
+
+ regulators {
+ vdd_cpu: DCDC_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vdd_cpu";
+ };
+
+ vdd_log: DCDC_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vdd_log";
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_ddr";
+ };
+
+ vcc_io: DCDC_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_io";
+ };
+
+ vcc18_flash: LDO_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc18_flash";
+ };
+
+ vcca_33: LDO_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcca_33";
+ };
+
+ vdd_10: LDO_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vdd_10";
+ };
+
+ avdd_33: LDO_REG4 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "avdd_33";
+ };
+
+ vccio_sd: LDO_REG5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vccio_sd";
+ };
+
+ vdd10_lcd: LDO_REG6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vdd10_lcd";
+ };
+
+ vcc_18: LDO_REG7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc_18";
+ };
+
+ vcc18_lcd: LDO_REG8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc18_lcd";
+ };
+
+ vcc_sd: SWITCH_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_sd";
+ };
+
+ vcc33_lcd: SWITCH_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc33_lcd";
+ };
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ /* Accelerometer */
+ bma250@18 {
+ compatible = "bma250";
+ reg = <0x18>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ stk3410@48 {
+ compatible = "STK3310";
+ reg = <0x48>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+
+ gsl1680: touchscreen@40 {
+ compatible = "gsl1680";
+ reg = <0x40>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+ power-gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+ touchscreen-size-x = <800>;
+ touchscreen-size-y = <1280>;
+ silead,max-fingers = <5>;
+ };
+};
+
+&pinctrl {
+
+ keys {
+ pwr_key: pwr-key {
+ rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_sleep: pmic-sleep {
+ rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>;
+ };
+
+ pmic_int: pmic-int {
+ rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
+
+&tsadc {
+ status = "okay";
+ rockchip,hw-tshut-mode = <0>; /* CRU */
+ rockchip,hw-tshut-polarity = <1>; /* high */
+};
+
+&uart4 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_otg {
+ status = "okay";
+};
+
+&wdt {
+ status = "okay";
+};
--
2.7.4
^ permalink raw reply related [flat|nested] 10+ messages in thread[parent not found: <1473498094-16279-1-git-send-email-andy.yan-TNX95d0MmH7DzftRWevZcw@public.gmane.org>]
* Re: [PATCH 1/2] ARM: dts: add rockchip PX3 board
[not found] ` <1473498094-16279-1-git-send-email-andy.yan-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
@ 2016-09-10 9:15 ` Heiko Stuebner
2016-09-10 9:37 ` Andy Yan
0 siblings, 1 reply; 10+ messages in thread
From: Heiko Stuebner @ 2016-09-10 9:15 UTC (permalink / raw)
To: Andy Yan
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
briannorris-F7+t8E8rja9g9hUCZPvPmw,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8
Hi Andy,
Am Samstag, 10. September 2016, 17:01:34 CEST schrieb Andy Yan:
> PX3 board is designed by Rockchip for automotive field,
> which intergrated with CVBS(TP2825)/MIPI DSI/LVDS/HDMI
> video input/output interface, WIFI/BT/GPS(on a module
> named S500 which based on MT6620), Gsensor BMA250E and
> light&proximity sensor STK3410.
>
> Signed-off-by: Andy Yan <andy.yan-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
> ---
>
> Documentation/devicetree/bindings/arm/rockchip.txt | 4 +
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/rk3188-px3.dts | 337
> +++++++++++++++++++++ 3 files changed, 342 insertions(+)
> create mode 100644 arch/arm/boot/dts/rk3188-px3.dts
>
> diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt
> b/Documentation/devicetree/bindings/arm/rockchip.txt index 6668645..e680105
> 100644
> --- a/Documentation/devicetree/bindings/arm/rockchip.txt
> +++ b/Documentation/devicetree/bindings/arm/rockchip.txt
> @@ -21,6 +21,10 @@ Rockchip platforms device tree bindings
> Required root node properties:
> - compatible = "radxa,rock", "rockchip,rk3188";
>
> +- Rockchip PX3 board:
> + Required root node properties:
> + - compatible = "rockchip,px3", "rockchip,rk3188";
Just like to confirm the naming.
I read the announcement of both the PX3 and PX5 socs, are the boards really
also named only px3 + px5 - same as the socs they carry, or are they more
likely to be called px3-evb or similar?
The dts themself look fine on first glance.
Thanks
Heiko
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [PATCH 1/2] ARM: dts: add rockchip PX3 board
2016-09-10 9:15 ` [PATCH 1/2] ARM: dts: add rockchip PX3 board Heiko Stuebner
@ 2016-09-10 9:37 ` Andy Yan
[not found] ` <c5a7f275-a8df-58c3-b255-ce9df13c67b4-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
0 siblings, 1 reply; 10+ messages in thread
From: Andy Yan @ 2016-09-10 9:37 UTC (permalink / raw)
To: Heiko Stuebner
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
briannorris-F7+t8E8rja9g9hUCZPvPmw,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8
Hi Heiko:
On 2016年09月10日 17:15, Heiko Stuebner wrote:
> Hi Andy,
>
> Am Samstag, 10. September 2016, 17:01:34 CEST schrieb Andy Yan:
>> PX3 board is designed by Rockchip for automotive field,
>> which intergrated with CVBS(TP2825)/MIPI DSI/LVDS/HDMI
>> video input/output interface, WIFI/BT/GPS(on a module
>> named S500 which based on MT6620), Gsensor BMA250E and
>> light&proximity sensor STK3410.
>>
>> Signed-off-by: Andy Yan <andy.yan-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
>> ---
>>
>> Documentation/devicetree/bindings/arm/rockchip.txt | 4 +
>> arch/arm/boot/dts/Makefile | 1 +
>> arch/arm/boot/dts/rk3188-px3.dts | 337
>> +++++++++++++++++++++ 3 files changed, 342 insertions(+)
>> create mode 100644 arch/arm/boot/dts/rk3188-px3.dts
>>
>> diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt
>> b/Documentation/devicetree/bindings/arm/rockchip.txt index 6668645..e680105
>> 100644
>> --- a/Documentation/devicetree/bindings/arm/rockchip.txt
>> +++ b/Documentation/devicetree/bindings/arm/rockchip.txt
>> @@ -21,6 +21,10 @@ Rockchip platforms device tree bindings
>> Required root node properties:
>> - compatible = "radxa,rock", "rockchip,rk3188";
>>
>> +- Rockchip PX3 board:
>> + Required root node properties:
>> + - compatible = "rockchip,px3", "rockchip,rk3188";
> Just like to confirm the naming.
>
> I read the announcement of both the PX3 and PX5 socs, are the boards really
> also named only px3 + px5 - same as the socs they carry, or are they more
> likely to be called px3-evb or similar?
>
> The dts themself look fine on first glance.
>
We call them px3 or px5 development board in the internal development.
Of course I can change them to px3/px5-evb if you desire.
> Thanks
> Heiko
>
>
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 1/2] ARM: dts: add rockchip PX3 board
2016-09-10 9:01 [PATCH 1/2] ARM: dts: add rockchip PX3 board Andy Yan
2016-09-10 9:05 ` [PATCH 2/2] arm64: dts: rockchip: Add PX5 board Andy Yan
[not found] ` <1473498094-16279-1-git-send-email-andy.yan-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
@ 2016-09-10 10:03 ` Heiko Stuebner
2016-09-10 10:07 ` Heiko Stuebner
2 siblings, 1 reply; 10+ messages in thread
From: Heiko Stuebner @ 2016-09-10 10:03 UTC (permalink / raw)
To: Andy Yan; +Cc: devicetree, briannorris, linux-kernel, robh+dt, mark.rutland
Am Samstag, 10. September 2016, 17:01:34 CEST schrieb Andy Yan:
> PX3 board is designed by Rockchip for automotive field,
> which intergrated with CVBS(TP2825)/MIPI DSI/LVDS/HDMI
> video input/output interface, WIFI/BT/GPS(on a module
> named S500 which based on MT6620), Gsensor BMA250E and
> light&proximity sensor STK3410.
>
> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
[...]
> diff --git a/arch/arm/boot/dts/rk3188-px3.dts
> b/arch/arm/boot/dts/rk3188-px3.dts new file mode 100644
> index 0000000..ece45d7
> --- /dev/null
> +++ b/arch/arm/boot/dts/rk3188-px3.dts
> @@ -0,0 +1,337 @@
> +/*
> + * Copyright (c) 2016 Andy Yan <andy.yan@rock-chips.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +#include <dt-bindings/input/input.h>
> +#include "rk3188.dtsi"
> +
> +/ {
> + model = "Rockchip PX3";
> + compatible = "rockchip,px3", "rockchip,rk3188";
> +
> + chosen {
> + bootargs = "console=ttyS2,115200 earlyprintk";
> + };
setting bootargs isn't favoured, you can instead use
stdout-path = "serial2:115200n8";
to define the default console
> +&i2c0 {
> + status = "okay";
> +
> + /* Accelerometer */
> + bma250@18 {
> + compatible = "bma250";
> + reg = <0x18>;
> + interrupt-parent = <&gpio0>;
> + interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
> + };
driver seems to be missing a devicetree binding (module_id_table
and dt-binding document)
> + stk3410@48 {
> + compatible = "STK3310";
> + reg = <0x48>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
> + };
> +};
driver seems to be missing a devicetree binding (module_id_table
and dt-binding document)
> +&i2c2 {
> + gsl1680: touchscreen@40 {
> + compatible = "gsl1680";
> + reg = <0x40>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
> + power-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
> + touchscreen-size-x = <800>;
> + touchscreen-size-y = <1280>;
> + silead,max-fingers = <5>;
> + };
this should probably be
"silead,gsl1680"
see https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/tree/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [PATCH 1/2] ARM: dts: add rockchip PX3 board
2016-09-10 10:03 ` Heiko Stuebner
@ 2016-09-10 10:07 ` Heiko Stuebner
2016-09-10 13:10 ` 闫孝军
0 siblings, 1 reply; 10+ messages in thread
From: Heiko Stuebner @ 2016-09-10 10:07 UTC (permalink / raw)
To: Andy Yan
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
briannorris-F7+t8E8rja9g9hUCZPvPmw,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8
Am Samstag, 10. September 2016, 12:03:38 CEST schrieb Heiko Stuebner:
> Am Samstag, 10. September 2016, 17:01:34 CEST schrieb Andy Yan:
> > PX3 board is designed by Rockchip for automotive field,
> > which intergrated with CVBS(TP2825)/MIPI DSI/LVDS/HDMI
> > video input/output interface, WIFI/BT/GPS(on a module
> > named S500 which based on MT6620), Gsensor BMA250E and
> > light&proximity sensor STK3410.
> >
> > Signed-off-by: Andy Yan <andy.yan-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
>
> [...]
>
> > diff --git a/arch/arm/boot/dts/rk3188-px3.dts
> > b/arch/arm/boot/dts/rk3188-px3.dts new file mode 100644
> > index 0000000..ece45d7
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/rk3188-px3.dts
> > @@ -0,0 +1,337 @@
> > +/*
> > + * Copyright (c) 2016 Andy Yan <andy.yan-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
> > + *
> > + * This file is dual-licensed: you can use it either under the terms
> > + * of the GPL or the X11 license, at your option. Note that this dual
> > + * licensing only applies to this file, and not this project as a
> > + * whole.
> > + *
> > + * a) This file is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License as
> > + * published by the Free Software Foundation; either version 2 of the
> > + * License, or (at your option) any later version.
> > + *
> > + * This file is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + *
> > + * Or, alternatively,
> > + *
> > + * b) Permission is hereby granted, free of charge, to any person
> > + * obtaining a copy of this software and associated documentation
> > + * files (the "Software"), to deal in the Software without
> > + * restriction, including without limitation the rights to use,
> > + * copy, modify, merge, publish, distribute, sublicense, and/or
> > + * sell copies of the Software, and to permit persons to whom the
> > + * Software is furnished to do so, subject to the following
> > + * conditions:
> > + *
> > + * The above copyright notice and this permission notice shall be
> > + * included in all copies or substantial portions of the Software.
> > + *
> > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> > + * OTHER DEALINGS IN THE SOFTWARE.
> > + */
> > +
> > +/dts-v1/;
> > +#include <dt-bindings/input/input.h>
> > +#include "rk3188.dtsi"
> > +
> > +/ {
> > + model = "Rockchip PX3";
> > + compatible = "rockchip,px3", "rockchip,rk3188";
> > +
> > + chosen {
> > + bootargs = "console=ttyS2,115200 earlyprintk";
> > + };
>
> setting bootargs isn't favoured, you can instead use
> stdout-path = "serial2:115200n8";
>
> to define the default console
>
> > +&i2c0 {
> > + status = "okay";
> > +
> > + /* Accelerometer */
> > + bma250@18 {
> > + compatible = "bma250";
> > + reg = <0x18>;
> > + interrupt-parent = <&gpio0>;
> > + interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
> > + };
>
> driver seems to be missing a devicetree binding (module_id_table
> and dt-binding document)
found it, should be
bosch,bma250
according to Documentation/devicetree/bindings/iio/accel/bma180.txt
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: Re: [PATCH 1/2] ARM: dts: add rockchip PX3 board
2016-09-10 10:07 ` Heiko Stuebner
@ 2016-09-10 13:10 ` 闫孝军
[not found] ` <201609102110352938974-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
0 siblings, 1 reply; 10+ messages in thread
From: 闫孝军 @ 2016-09-10 13:10 UTC (permalink / raw)
To: HeikoStübner
Cc: devicetree, briannorris, linux-kernel, robh+dt, mark.rutland
[-- Attachment #1: Type: text/plain, Size: 4154 bytes --]
Hi Heiko：
From: Heiko Stuebner
Date: 2016-09-10 18:07
To: Andy Yan
CC: devicetree; briannorris; linux-kernel; robh+dt; mark.rutland
Subject: Re: [PATCH 1/2] ARM: dts: add rockchip PX3 board
Am Samstag, 10. September 2016, 12:03:38 CEST schrieb Heiko Stuebner:
> Am Samstag, 10. September 2016, 17:01:34 CEST schrieb Andy Yan:
> > PX3 board is designed by Rockchip for automotive field,
> > which intergrated with CVBS(TP2825)/MIPI DSI/LVDS/HDMI
> > video input/output interface, WIFI/BT/GPS(on a module
> > named S500 which based on MT6620), Gsensor BMA250E and
> > light&proximity sensor STK3410.
> >
> > Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
>
> [...]
>
> > diff --git a/arch/arm/boot/dts/rk3188-px3.dts
> > b/arch/arm/boot/dts/rk3188-px3.dts new file mode 100644
> > index 0000000..ece45d7
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/rk3188-px3.dts
> > @@ -0,0 +1,337 @@
> > +/*
> > + * Copyright (c) 2016 Andy Yan <andy.yan@rock-chips.com>
> > + *
> > + * This file is dual-licensed: you can use it either under the terms
> > + * of the GPL or the X11 license, at your option. Note that this dual
> > + * licensing only applies to this file, and not this project as a
> > + * whole.
> > + *
> > + * a) This file is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License as
> > + * published by the Free Software Foundation; either version 2 of the
> > + * License, or (at your option) any later version.
> > + *
> > + * This file is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + *
> > + * Or, alternatively,
> > + *
> > + * b) Permission is hereby granted, free of charge, to any person
> > + * obtaining a copy of this software and associated documentation
> > + * files (the "Software"), to deal in the Software without
> > + * restriction, including without limitation the rights to use,
> > + * copy, modify, merge, publish, distribute, sublicense, and/or
> > + * sell copies of the Software, and to permit persons to whom the
> > + * Software is furnished to do so, subject to the following
> > + * conditions:
> > + *
> > + * The above copyright notice and this permission notice shall be
> > + * included in all copies or substantial portions of the Software.
> > + *
> > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> > + * OTHER DEALINGS IN THE SOFTWARE.
> > + */
> > +
> > +/dts-v1/;
> > +#include <dt-bindings/input/input.h>
> > +#include "rk3188.dtsi"
> > +
> > +/ {
> > + model = "Rockchip PX3";
> > + compatible = "rockchip,px3", "rockchip,rk3188";
> > +
> > + chosen {
> > + bootargs = "console=ttyS2,115200 earlyprintk";
> > + };
>
> setting bootargs isn't favoured, you can instead use
> stdout-path = "serial2:115200n8";
>
> to define the default console
>
> > +&i2c0 {
> > + status = "okay";
> > +
> > + /* Accelerometer */
> > + bma250@18 {
> > + compatible = "bma250";
> > + reg = <0x18>;
> > + interrupt-parent = <&gpio0>;
> > + interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
> > + };
>
> driver seems to be missing a devicetree binding (module_id_table
> and dt-binding document)
found it, should be
bosch,bma250
according to Documentation/devicetree/bindings/iio/accel/bma180.txt
But I found the i2c_device_id in the source code is "bma250", not "bosch,bma250"
according to drivers/iio/accel/bma180.c
[-- Attachment #2: Type: text/html, Size: 7920 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2016-09-10 13:27 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-09-10 9:01 [PATCH 1/2] ARM: dts: add rockchip PX3 board Andy Yan
2016-09-10 9:05 ` [PATCH 2/2] arm64: dts: rockchip: Add PX5 board Andy Yan
[not found] ` <1473498094-16279-1-git-send-email-andy.yan-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2016-09-10 9:15 ` [PATCH 1/2] ARM: dts: add rockchip PX3 board Heiko Stuebner
2016-09-10 9:37 ` Andy Yan
[not found] ` <c5a7f275-a8df-58c3-b255-ce9df13c67b4-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2016-09-10 9:45 ` Heiko Stuebner
2016-09-10 9:46 ` Andy Yan
2016-09-10 10:03 ` Heiko Stuebner
2016-09-10 10:07 ` Heiko Stuebner
2016-09-10 13:10 ` 闫孝军
[not found] ` <201609102110352938974-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2016-09-10 13:27 ` Heiko Stuebner
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).