From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rob Herring Subject: Re: [PATCH v2 2/6] Documentation: dt-bindings: Add documentation for the Meson USB2 PHYs Date: Tue, 20 Sep 2016 09:29:45 -0500 Message-ID: <20160920142944.GA16016@rob-hp-laptop> References: <20160904213152.25837-1-martin.blumenstingl@googlemail.com> <20160911134111.31141-1-martin.blumenstingl@googlemail.com> <20160911134111.31141-3-martin.blumenstingl@googlemail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <20160911134111.31141-3-martin.blumenstingl@googlemail.com> Sender: linux-clk-owner@vger.kernel.org To: Martin Blumenstingl Cc: linux-clk@vger.kernel.org, linux-usb@vger.kernel.org, linux-amlogic@lists.infradead.org, jbrunet@baylibre.com, johnyoun@synopsys.com, kishon@ti.com, khilman@baylibre.com, carlo@caione.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, sboyd@codeaurora.org, mturquette@baylibre.com, will.deacon@arm.com, catalin.marinas@arm.com, gregkh@linuxfoundation.org, mark.rutland@arm.com List-Id: devicetree@vger.kernel.org On Sun, Sep 11, 2016 at 03:41:07PM +0200, Martin Blumenstingl wrote: > Add the documentation for the bindings for the Meson8b and GXBB USB2 > PHYs. > > Signed-off-by: Martin Blumenstingl > --- > .../devicetree/bindings/phy/meson-usb2-phy.txt | 27 ++++++++++++++++++++++ > 1 file changed, 27 insertions(+) > create mode 100644 Documentation/devicetree/bindings/phy/meson-usb2-phy.txt > > diff --git a/Documentation/devicetree/bindings/phy/meson-usb2-phy.txt b/Documentation/devicetree/bindings/phy/meson-usb2-phy.txt > new file mode 100644 > index 0000000..9da5ea2 > --- /dev/null > +++ b/Documentation/devicetree/bindings/phy/meson-usb2-phy.txt > @@ -0,0 +1,27 @@ > +* Amlogic USB2 PHY > + > +Required properties: > +- compatible: Depending on the platform this should be one of: > + "amlogic,meson8b-usb2-phy" > + "amlogic,meson-gxbb-usb2-phy" > +- reg: The base address and length of the registers > +- #phys-cells: should be 0 (see phy-bindings.txt in this directory) > +- clocks: phandle and clock identifier for the phy clocks > +- clock-names: "usb_general" and "usb" > + > +Optional properties: > +- resets: reference to the reset controller > +- phy-supply: see phy-bindings.txt in this directory > + > + > +Example: > + > +usb0_phy: usb_phy@0 { usb-phy@0 With that, Acked-by: Rob Herring > + compatible = "amlogic,meson-gxbb-usb2-phy"; > + #phy-cells = <0>; > + reg = <0x0 0x0 0x0 0x20>; > + resets = <&reset RESET_USB_OTG>; > + clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>; > + clock-names = "usb_general", "usb"; > + phy-supply = <&usb_vbus>; > +}; > -- > 2.9.3 >