From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rob Herring Subject: Re: [PATCH v5 2/2] usb: chipidea: imx: Add binding to disable USB 60Mhz clock Date: Fri, 23 Sep 2016 14:47:28 -0500 Message-ID: <20160923194728.GA7120@rob-hp-laptop> References: <1474448827-8354-1-git-send-email-fabien.lahoudere@collabora.co.uk> <1474448827-8354-3-git-send-email-fabien.lahoudere@collabora.co.uk> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <1474448827-8354-3-git-send-email-fabien.lahoudere@collabora.co.uk> Sender: linux-kernel-owner@vger.kernel.org To: Fabien Lahoudere Cc: Peter.Chen@nxp.com, gregkh@linuxfoundation.org, linux-usb@vger.kernel.org, mark.rutland@arm.com, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org List-Id: devicetree@vger.kernel.org On Wed, Sep 21, 2016 at 11:07:07AM +0200, Fabien Lahoudere wrote: > This binding allow to disable the internal 60Mhz clock for USB host2 or > host3. > > Signed-off-by: Fabien Lahoudere > --- > Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt | 1 + > drivers/usb/chipidea/ci_hdrc_imx.c | 2 ++ > drivers/usb/chipidea/ci_hdrc_imx.h | 1 + > drivers/usb/chipidea/usbmisc_imx.c | 13 +++++++++++++ > 4 files changed, 17 insertions(+) > > diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt > index 0e03344..f83da66 100644 > --- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt > +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt > @@ -84,6 +84,7 @@ i.mx specific properties > - over-current-active-high: over current signal polarity is high active, > typically over current signal polarity is low active. > - external-vbus-divider: enables off-chip resistor divider for Vbus > +- disable-int60ck: disable internal 60MHz clock for usb host2 or host3 on imx53 Doesn't this depend on something else like the type of phy connected? If not, when can you do this or not? Rob