From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rob Herring Subject: Re: [PATCH v2 1/3] dt-bindings: display: display-timing: Add property to configure sync drive edge Date: Fri, 23 Sep 2016 15:01:54 -0500 Message-ID: <20160923200154.GA15443@rob-hp-laptop> References: <20160922103526.24925-1-peter.ujfalusi@ti.com> <20160922103526.24925-2-peter.ujfalusi@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <20160922103526.24925-2-peter.ujfalusi-l0cyMroinI0@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Peter Ujfalusi Cc: plagnioj-sclMFOaUSTBWk0Htik3J/w@public.gmane.org, tomi.valkeinen-l0cyMroinI0@public.gmane.org, airlied-cv59FeDIM0c@public.gmane.org, thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, linux-fbdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, daniel.vetter-/w4YWyX8dFk@public.gmane.org, dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: devicetree@vger.kernel.org On Thu, Sep 22, 2016 at 01:35:24PM +0300, Peter Ujfalusi wrote: > There are display panels which demands that the sync signal is driven on > different edge than the pixel data. > With the syncclk-active property we can specify the clk edge to be used to > drive the sync signal. When the property is missing it indicates that the > sync is driven on the same edge as the pixel data. > > Signed-off-by: Peter Ujfalusi > CC: Rob Herring > CC: Mark Rutland > CC: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org > --- > .../devicetree/bindings/display/panel/display-timing.txt | 8 ++++++++ > 1 file changed, 8 insertions(+) Acked-by: Rob Herring -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html