From mboxrd@z Thu Jan 1 00:00:00 1970 From: Neil Armstrong Subject: [PATCH 3/3] dt-bindings: oxnas: Update Pinctrl and GPIO for OX820 Support Date: Tue, 4 Oct 2016 15:41:48 +0200 Message-ID: <20161004134148.23028-4-narmstrong@baylibre.com> References: <20161004134148.23028-1-narmstrong@baylibre.com> Return-path: In-Reply-To: <20161004134148.23028-1-narmstrong@baylibre.com> Sender: linux-gpio-owner@vger.kernel.org To: linus.walleij@linaro.org, gnurou@gmail.com Cc: Neil Armstrong , linux-gpio@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-oxnas@lists.tuxfamily.org, devicetree@vger.kernel.org List-Id: devicetree@vger.kernel.org Signed-off-by: Neil Armstrong --- Documentation/devicetree/bindings/gpio/gpio_oxnas.txt | 2 +- Documentation/devicetree/bindings/pinctrl/oxnas,pinctrl.txt | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/gpio/gpio_oxnas.txt b/Documentation/devicetree/bindings/gpio/gpio_oxnas.txt index 928ed4f..9665147 100644 --- a/Documentation/devicetree/bindings/gpio/gpio_oxnas.txt +++ b/Documentation/devicetree/bindings/gpio/gpio_oxnas.txt @@ -3,7 +3,7 @@ Please refer to gpio.txt for generic information regarding GPIO bindings. Required properties: - - compatible: "oxsemi,ox810se-gpio" + - compatible: "oxsemi,ox810se-gpio" or "oxsemi,ox820-gpio" - reg: Base address and length for the device. - interrupts: The port interrupt shared by all pins. - gpio-controller: Marks the port as GPIO controller. diff --git a/Documentation/devicetree/bindings/pinctrl/oxnas,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/oxnas,pinctrl.txt index d607432..09e81a9 100644 --- a/Documentation/devicetree/bindings/pinctrl/oxnas,pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/oxnas,pinctrl.txt @@ -9,7 +9,7 @@ used for a specific device or function. This node represents configurations of pins, optional function, and optional mux related configuration. Required properties for pin controller node: - - compatible: "oxsemi,ox810se-pinctrl" + - compatible: "oxsemi,ox810se-pinctrl" or "oxsemi,ox820-pinctrl" - oxsemi,sys-ctrl: a phandle to the system controller syscon node Required properties for pin configuration sub-nodes: -- 2.7.0