From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mugunthan V N Subject: [PATCH v3 3/4] ARM: dts: dra72-evm-revc: add phy impedance settings Date: Thu, 6 Oct 2016 10:43:54 +0530 Message-ID: <20161006051355.15947-4-mugunthanvnm@ti.com> References: <20161006051355.15947-1-mugunthanvnm@ti.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <20161006051355.15947-1-mugunthanvnm@ti.com> Sender: linux-kernel-owner@vger.kernel.org To: netdev@vger.kernel.org Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Rob Herring , Mark Rutland , Tony Lindgren , Russell King , Florian Fainelli , David Miller , Sekhar Nori , Mugunthan V N List-Id: devicetree@vger.kernel.org The default impedance settings of the phy is not the optimal value, due to this the second ethernet is not working. Fix it with correct values which makes the second ethernet port to work. Signed-off-by: Mugunthan V N --- arch/arm/boot/dts/dra72-evm-revc.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/dra72-evm-revc.dts b/arch/arm/boot/dts/dra72-evm-revc.dts index f9cfd3b..aafb594 100644 --- a/arch/arm/boot/dts/dra72-evm-revc.dts +++ b/arch/arm/boot/dts/dra72-evm-revc.dts @@ -62,6 +62,7 @@ ti,rx-internal-delay = ; ti,tx-internal-delay = ; ti,fifo-depth = ; + ti,min-output-impedance; }; dp83867_1: ethernet-phy@3 { @@ -69,5 +70,6 @@ ti,rx-internal-delay = ; ti,tx-internal-delay = ; ti,fifo-depth = ; + ti,min-output-imepdance; }; }; -- 2.10.0.372.g6fe1b14