From: "Andrew F. Davis" <afd-l0cyMroinI0@public.gmane.org>
To: "Benoît Cousson"
<bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>,
"Tony Lindgren" <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
Cc: linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
"Andrew F . Davis" <afd-l0cyMroinI0@public.gmane.org>
Subject: [PATCH 6/7] ARM: dts: am57xx-idk: Add Industrial input support
Date: Fri, 7 Oct 2016 09:44:27 -0500 [thread overview]
Message-ID: <20161007144428.16671-6-afd@ti.com> (raw)
In-Reply-To: <20161007144428.16671-1-afd-l0cyMroinI0@public.gmane.org>
The SN65HVS882 is available on both the AM572x and AM571x IDKs and is
attached to SPI1. Input is attached to the I/O header. The load trigger
is attached to GPIO3_19 on the AM572x IDK.
Signed-off-by: Andrew F. Davis <afd-l0cyMroinI0@public.gmane.org>
Signed-off-by: Sekhar Nori <nsekhar-l0cyMroinI0@public.gmane.org>
---
arch/arm/boot/dts/am572x-idk.dts | 4 ++++
arch/arm/boot/dts/am57xx-idk-common.dtsi | 15 +++++++++++++++
2 files changed, 19 insertions(+)
diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts
index 87bbc66..27d9149 100644
--- a/arch/arm/boot/dts/am572x-idk.dts
+++ b/arch/arm/boot/dts/am572x-idk.dts
@@ -83,3 +83,7 @@
bus-width = <4>;
cd-gpios = <&gpio6 27 0>; /* gpio 219 */
};
+
+&sn65hvs882 {
+ load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi
index 03cec62..438076e 100644
--- a/arch/arm/boot/dts/am57xx-idk-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi
@@ -253,6 +253,21 @@
};
};
+&mcspi3 {
+ status = "okay";
+ ti,pindir-d0-out-d1-in;
+
+ sn65hvs882: sn65hvs882@0 {
+ compatible = "pisosr-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ spi-cpol;
+ };
+};
+
&uart3 {
status = "okay";
interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH
--
2.10.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-10-07 14:44 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-07 14:44 [PATCH 1/7] ARM: dts: am335x-icev2: Add Industrial input support Andrew F. Davis
2016-10-07 14:44 ` [PATCH 3/7] ARM: dts: am335x-icev2: Add ADC support Andrew F. Davis
2016-10-07 14:44 ` [PATCH 4/7] ARM: dts: am437x-idk: Add Industrial input support Andrew F. Davis
[not found] ` <20161007144428.16671-1-afd-l0cyMroinI0@public.gmane.org>
2016-10-07 14:44 ` [PATCH 2/7] ARM: dts: am335x-icev2: Disable Industrial I/O LEDs and fix naming Andrew F. Davis
2016-10-07 14:44 ` [PATCH 5/7] ARM: dts: am437x-idk: Add Industrial output support Andrew F. Davis
2016-10-07 14:44 ` Andrew F. Davis [this message]
2016-10-07 14:44 ` [PATCH 7/7] ARM: dts: am57xx-idk: " Andrew F. Davis
2016-11-18 15:00 ` [PATCH 1/7] ARM: dts: am335x-icev2: Add Industrial input support Andrew F. Davis
[not found] ` <7095f8b0-efdb-6187-7580-43e8a0fa2cf3-l0cyMroinI0@public.gmane.org>
2016-11-18 15:08 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161007144428.16671-6-afd@ti.com \
--to=afd-l0cymroini0@public.gmane.org \
--cc=bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).