From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rob Herring Subject: Re: [PATCH 02/10] mfd: ptxpmb-cpld: Add documentation for PTXPMB CPLD Date: Mon, 10 Oct 2016 12:38:24 -0500 Message-ID: <20161010173824.GA3245@rob-hp-laptop> References: <1475853451-22121-1-git-send-email-pantelis.antoniou@konsulko.com> <1475853451-22121-3-git-send-email-pantelis.antoniou@konsulko.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Content-Disposition: inline In-Reply-To: <1475853451-22121-3-git-send-email-pantelis.antoniou@konsulko.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-mtd" Errors-To: linux-mtd-bounces+gldm-linux-mtd-36=gmane.org@lists.infradead.org To: Pantelis Antoniou Cc: Mark Rutland , Wolfram Sang , Linus Walleij , Guenter Roeck , Wim Van Sebroeck , linux-mtd@lists.infradead.org, linux-i2c@vger.kernel.org, Frank Rowand , Alexandre Courbot , Lee Jones , JawaharBalaji Thirumalaisamy , Guenter Roeck , devicetree@vger.kernel.org, linux-watchdog@vger.kernel.org, linux-gpio@vger.kernel.org, Debjit Ghosh , Georgi Vlaev , Rajat Jain , linux-kernel@vger.kernel.org, Brian Norris , David Woodhouse , Peter Rosin List-Id: devicetree@vger.kernel.org On Fri, Oct 07, 2016 at 06:17:23PM +0300, Pantelis Antoniou wrote: > From: Georgi Vlaev > > Add DT bindings document for the PTXPMB CPLD MFD device. > > Signed-off-by: Georgi Vlaev > [Ported from Juniper kernel] > Signed-off-by: Pantelis Antoniou > --- > .../devicetree/bindings/mfd/jnx-ptxpmb-cpld.txt | 76 ++++++++++++++++++++++ > 1 file changed, 76 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mfd/jnx-ptxpmb-cpld.txt > > diff --git a/Documentation/devicetree/bindings/mfd/jnx-ptxpmb-cpld.txt b/Documentation/devicetree/bindings/mfd/jnx-ptxpmb-cpld.txt > new file mode 100644 > index 0000000..cc3cbb9 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/jnx-ptxpmb-cpld.txt > @@ -0,0 +1,76 @@ > +* Device tree bindings for Juniper's PTXPMB CPLD FPGA MFD driver > + > +The device supports a number I2C muxes, hardware watchdog and a gpio block. > +Those devices bindings are described in the jnx-i2c-mux-ptxpmb-cpld, > +jnx-ptxpmb-wdt and jnx-gpio-ptxpmb-cpld documents. > + > +Required properties: > + > +- compatible: "jnx,ptxpmb-cpld", "jnx,ngpmb-bcpld". They differ bcpld? looks like a typo? > + in the i2c-mux blocks. > + > +- reg: contains offset/length value for device state control > + registers space. > + > +Optional properties: > + > +- interrupts: The interrupt line(s) the /IRQ signal(s) for the device is > + connected to. > + > +- interrupt-parent: The parent interrupt controller. > + > +Example: > + > +cpld@0,0 { What bus is this on? If just simple-bus, then just '...@0' > + compatible = "jnx,ptxpmb-cpld"; > + reg = <0x0 0 0x10000>; ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/