Re: [PATCH v4] pwm: add pwm driver for HiSilicon BVT SOCs

[Rob Herring <robh@kernel.org>]

On Mon, Oct 10, 2016 at 07:05:16PM +0800, Jian Yuan wrote:
> From: yuanjian <yuanjian12@hisilicon.com>
> 
> Add PWM driver for the PWM controller found on HiSilicon BVT SOCs, like Hi3519V100, Hi3516CV300, etc.
> The PWM controller is primarily in charge of controlling P-Iris lens.
> 
> Reviewed-by: Jiancheng Xue <xuejiancheng@hisilicon.com>
> Signed-off-by: Jian Yuan <yuanjian12@hisilicon.com>
> ---
> Change Log:
> v4:
> Add #pwm-cells in the bindings document.
> v3:
> fixed issues pointed by thierry.
> Add PWM compatible string for Hi3519V100.
> Implement .apply() function which support atomic, instead of .enable()/.disable()/.config().
> v2:
> The number of PWMs is change to be probeable based on the compatible string.
> 
>  .../devicetree/bindings/pwm/pwm-hibvt.txt          |  23 ++
>  drivers/pwm/Kconfig                                |   9 +
>  drivers/pwm/Makefile                               |   1 +
>  drivers/pwm/pwm-hibvt.c                            | 270 +++++++++++++++++++++
>  4 files changed, 303 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pwm/pwm-hibvt.txt
>  create mode 100644 drivers/pwm/pwm-hibvt.c
> 
> diff --git a/Documentation/devicetree/bindings/pwm/pwm-hibvt.txt b/Documentation/devicetree/bindings/pwm/pwm-hibvt.txt
> new file mode 100644
> index 0000000..609284f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pwm/pwm-hibvt.txt
> @@ -0,0 +1,23 @@
> +Hisilicon PWM controller
> +
> +Required properties:
> +-compatible: should contain one SoC specific compatible string and one generic compatible
> +string "hisilicon, hibvt-pwm". The SoC specific strings supported including:

Extra space          ^

With that, for the binding:

Acked-by: Rob Herring <robh@kernel.org>

> +	"hisilicon,hi3516cv300-pwm"
> +	"hisilicon,hi3519v100-pwm"
> +- reg: physical base address and length of the controller's registers.
> +- clocks: phandle and clock specifier of the PWM reference clock.
> +- resets: phandle and reset specifier for the PWM controller reset.
> +- #pwm-cells: Should be 2. See pwm.txt in this directory for a description of
> +  the cells format.
> +
> +Example:
> +	pwm: pwm@12130000 {
> +
> +		compatible = "hisilicon,hi3516cv300-pwm", "hisilicon,hibvt-pwm";
> +		compatible = "hisilicon,hi3519v100-pwm", "hisilicon,hibvt-pwm";
> +		reg = <0x12130000 0x10000>;
> +		clocks = <&crg_ctrl HI3516CV300_PWM_CLK>;
> +		resets = <&crg_ctrl 0x38 0>;
> +		#pwm-cells = <2>;
> +	};