Re: [PATCH 2/5] pwm: Add Allwinner A31 SoC support

[LABBE Corentin <clabbe.montjoie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]

Hello

I have a minor comment below

On Tue, Oct 11, 2016 at 02:34:46PM +0800, Icenowy Zheng wrote:
> This adds a generic PWM framework driver for the PWM controller found
> on Allwinner A31 and A31s SoCs.
> 
> The PWM controller is different with other Allwinner SoCs, with a
> control register per channel (in other SoCs the control register is
> shared), and each channel are allocated 16 bytes of address (but only 8
> bytes are used.)
> 
> In order to use the driver for all channels, device nodes should be
> created per channel.
> 
> Signed-off-by: Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
> ---
>  drivers/pwm/Kconfig     |  10 ++
>  drivers/pwm/Makefile    |   1 +
>  drivers/pwm/pwm-sun6i.c | 323 ++++++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 334 insertions(+)
>  create mode 100644 drivers/pwm/pwm-sun6i.c
> 
> +
> +static int sun6i_pwm_probe(struct platform_device *pdev)
> +{
> +	struct sun6i_pwm_chip *pwm;
> +	struct resource *res;
> +	u32 val;
> +	int ret;
> +	const struct of_device_id *match;
> +
> +	match = of_match_device(sun6i_pwm_dt_ids, &pdev->dev);

match is not used after.

Regards

Corentin Labbe