From mboxrd@z Thu Jan 1 00:00:00 1970 From: Krzysztof Kozlowski Subject: Re: [PATCH v9 2/2] ARM: dts: add TOPEET itop elite based board Date: Tue, 18 Oct 2016 20:37:48 +0300 Message-ID: <20161018173748.GB30003@kozik-lap> References: <1476811129-4450-1-git-send-email-ayaka@soulik.info> <1476811129-4450-3-git-send-email-ayaka@soulik.info> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Return-path: Content-Disposition: inline In-Reply-To: <1476811129-4450-3-git-send-email-ayaka@soulik.info> Sender: linux-samsung-soc-owner@vger.kernel.org To: Randy Li Cc: devicetree@vger.kernel.org, mark.rutland@arm.com, linux@armlinux.org.uk, kgene@kernel.org, krzk@kernel.org, linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org, robh@kernel.org List-Id: devicetree@vger.kernel.org On Wed, Oct 19, 2016 at 01:18:49AM +0800, Randy Li wrote: > The TOPEET itop exynos 4412 have three versions base board. The > Elite version is the cheap one without too much peripheral devices > on it. > > Currently supported are serial console, wired networking(USB), > USB OTG in peripheral mode, USB host, SD storage, GPIO buttons, > PWM beeper, ADC and LEDs. The WM8960 analog audio codec is also > enabled. > > The FIMC is not used for camera currently, I enabled it just for a > colorspace converter. > > Signed-off-by: Randy Li > Reviewed-by: Krzysztof Kozlowski Thanks, applied, with missing Rob's ack, minor changes in commit msg and fix in pin function (you used macro for pull up/down instead of function). Best regards, Krzysztof