From mboxrd@z Thu Jan 1 00:00:00 1970 From: LABBE Corentin Subject: Re: [PATCH] ARM: dt: sun8i-h3: Add sunxi-sid to dts for sun8i-h3 Date: Wed, 19 Oct 2016 09:40:16 +0200 Message-ID: <20161019074016.GA31440@Red> References: <1475660904-7959-1-git-send-email-clabbe.montjoie@gmail.com> <20161005122130.8cc229ff5d4990149956b49c@free.fr> Reply-To: clabbe.montjoie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Return-path: Sender: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org Content-Disposition: inline In-Reply-To: <20161005122130.8cc229ff5d4990149956b49c-GANU6spQydw@public.gmane.org> List-Post: , List-Help: , List-Archive: , List-Unsubscribe: , To: Jean-Francois Moine Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, mark.rutland-5wv7dgnIgG8@public.gmane.org, maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org, wens-jdAy2FN1RRM@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org List-Id: devicetree@vger.kernel.org On Wed, Oct 05, 2016 at 12:21:30PM +0200, Jean-Francois Moine wrote: > On Wed, 5 Oct 2016 11:48:24 +0200 > Corentin Labbe wrote: > > > This patch add support for the sunxi-sid driver to the device tree for sun8i-h3. > > > > Signed-off-by: Corentin Labbe > > --- > > arch/arm/boot/dts/sun8i-h3.dtsi | 5 +++++ > > 1 file changed, 5 insertions(+) > > > > diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi > > index 9f58bb4..abfd29c 100644 > > --- a/arch/arm/boot/dts/sun8i-h3.dtsi > > +++ b/arch/arm/boot/dts/sun8i-h3.dtsi > > @@ -211,6 +211,11 @@ > > #size-cells = <0>; > > }; > > > > + sid: eeprom@01c14200 { > > + compatible = "allwinner,sun7i-a20-sid"; > > + reg = <0x01c14200 0x200>; > > The datasheet says 1Kb starting at 0x01c14000. > Is there any reason to reduce the area and to shift the offset? > According to http://linux-sunxi.org/SID_Register_Guide "For Allwinner A83T and H3 the SID address space starts at 0x01c14000, and the e-fuses are at offset 0x200". So I use this offset, since the sunxi_sid driver need the base address of e-fuses. The easiest solution is to use 0x01c14200 since the other part of sid is not used and not known (A83T/H3 user manual doesnt give any information on all sid space, worse for A64 which reference SID only in memory map). So probably for H3/A64/A83T, there will never any usage of the rest of the SID address space. Regards Corentin Labbe