Re: [PATCH v7 3/5] ARM: dts: imx6qdl-icore: Add usbhost support

[Shawn Guo <shawnguo@kernel.org>]

On Fri, Oct 14, 2016 at 02:57:21PM +0530, Jagan Teki wrote:
> From: Jagan Teki <jagan@amarulasolutions.com>
> 
> Add usbhost support for Engicam i.CoreM6 dql modules.
> 
> Cc: Sascha Hauer <kernel@pengutronix.de>
> Cc: Fabio Estevam <fabio.estevam@nxp.com>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: Matteo Lisi <matteo.lisi@engicam.com>
> Cc: Michael Trimarchi <michael@amarulasolutions.com>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> Changes for v7:
>         - none
> Changes for v6:
>         - none
> Changes for v5:
>         - none
> Changes for v4:
>         - new patch
> 
>  arch/arm/boot/dts/imx6qdl-icore.dtsi | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi
> index f424cd5..ffec879 100644
> --- a/arch/arm/boot/dts/imx6qdl-icore.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi
> @@ -56,6 +56,15 @@
>  		regulator-boot-on;
>  		regulator-always-on;
>  	};
> +
> +	reg_usb_h1_vbus: usb_h1_vbus {

Hyphen instead of underscore should be used in node name.  Also please
name fixed regulator in the following schema:

        reg_xxx: regulator-xxx {
                ...
        };

Shawn

> +		compatible = "regulator-fixed";
> +		regulator-name = "usb_h1_vbus";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		regulator-boot-on;
> +		regulator-always-on;
> +	};
>  };
>  
>  &can1 {
> @@ -109,6 +118,12 @@
>  	status = "okay";
>  };
>  
> +&usbh1 {
> +	vbus-supply = <&reg_usb_h1_vbus>;
> +	disable-over-current;
> +	status = "okay";
> +};
> +
>  &usdhc1 {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&pinctrl_usdhc1>;
> -- 
> 2.7.4
>